WAGO 750-370 Cuplaj Fieldbus

WAGO 750-370 is a PROFINET IO Fieldbus Coupler for the WAGO 750 Sistem I/O serie. Acest model este a 2-a generație (Gen.2) produs și este întrerupt în prezent. Înlocuitorul direct oficial este modelul de a 3-a generație 750-377.

1. Funcții de bază & Scop

Product type: PROFINET IO slave coupler

Core function: Acts as a gateway to connect WAGO 750 Series I/O modules to a PROFINET IO industrial Ethernet network

Network interface: Integrated 2-port 10/100 Mbps Ethernet switch (2× RJ45), supports wire-speed forwarding and auto-negotiation

System bus: Connects up to 64 WAGO 750 I/O modules via the internal K-Bus

Configuration methods: DIP switches, DCP protocol, Web-Based Management (WBM)

2. Parametrii tehnici cheie

3. Model Code Meaning (750-370)

750: Product series (WAGO-I/O-SYSTEM 750)

3: Fieldbus type (3 = PROFINET)

70: Specific model identifier (2nd generation, 2 ports)

4. Model de înlocuire (Official Recommendation)

750-370 ➡️ 750-377

750-377: 3rd generation (Gen.3) PROFINET coupler, Eco Advanced version

Complet compatibil: Direct replacement for 750-370, identical hardware, software and wiring

Performance improvements: Supports S2 system redundancy, faster response time, lower power consumption

Same width: 51 mm, can be installed directly in the original rail position

Other alternatives in the same series:

750-375: 3rd generation Basic version, similar functions to 750-377 with some simplified features

750-362: Modbus TCP coupler (if changing the fieldbus protocol)

5. Aplicații tipice

Distributed I/O systems for factory automation

Data acquisition and control between field level and control level (PLC)

PROFINET networks with mainstream PLCs such as Siemens, Rockwell, Beckhoff, etc.

Industrial sites requiring high real-time performance and long-distance communication

WAGO 750 Series Model List

The WAGO 750 Series is a modular, distributed I/O system with IP20 protection and DIN rail mounting, supporting all major fieldbus protocols. Below is a complete model list organized into five categories: fieldbus couplers, digital I/O, analog I/O, function modules, power & auxiliary modules (including common/mainstream models).

1. Fieldbus Couplers (Head Station)

Responsible for communication with upper-level PLC/controller and connecting 750 Series I/O modules.

1.1 PROFINET (Common)

750-370: 2nd generation, 2 ports, discontinued (replacement: 750-377)

750-377: 3rd generation, Eco Advanced, 2 ports, direct replacement for 750-370

750-375: 3rd generation, Versiunea de bază

750-373: 3rd generation, Extreme version (-40°C ~ +70°C)

1.2 Modbus TCP / EtherNet/IP

750-362: Modbus TCP, 4th generation

750-363: EtherNet/IP, 4th generation

1.3 PROFIBUS DP

750-303: 1st generation, 12 MBd

750-333: 2nd generation, 12 MBd

1.4 Other Fieldbuses

750-312: Modbus RTU (RS-485)

750-337: CANopen

750-346: DeviceNet

2. Digital Input Modules (DIN, Yellow)

2.1 Standard 24V DC

750-402: 4 canale, 24În DC, non-isolated

750-408: 8 canale, 24În DC, non-isolated

750-410: 16 canale, 24În DC, non-isolated

750-415: 8 canale, 24În DC, with diagnostics

750-417: 8 canale, 24În DC, isolated

2.2 Special / Explosion-Proof

750-438: 2 canale, NAMUR Ex i (intrinsically safe)

750-439: 8 canale, NAMUR Ex i (with wire-break diagnostics)

3. Digital Output Modules (DO, Roşu)

3.1 Standard 24V DC

750-504: 4 canale, 24În DC, 0.5O

750-517: 2 canale, relay output, 250V AC/30V DC, 2O

750-523: 4 canale, 24În DC, 2O, with diagnostics

750-527: 4 canale, solid-state relay (SSR), 30V AC/DC, 2O

3.2 High Voltage / High Current

750-530: 2 canale, 230V și, 0.5O

750-547: 1 canal, 440V și, 16O, high-current relay

4. Analog Input Modules (AI, Verde)

4.1 Standard Current / Voltaj

750-450: 4 canale, 0–10V / ±10V

750-451: 8 canale, 0–10V / ±10V

750-455: 4 canale, 0/4–20mA

750-459: 4 canale, 0–10V, single-ended

4.2 Temperature (RTD/TC)

750-460: 4 canale, RTD (Pt100/Ni1000)

750-461: 2 canale, RTD (Pt100), high precision

750-469: 2 canale, thermocouple (TC)

4.3 Special Signals

750-476: 2 canale, ±10V, 60Hz

750-484: 2 canale, resistance bridge / strain gauge

5. Analog Output Modules (LA, Albastru)

750-550: 2 canale, 0–10V / ±10V

750-552: 2 canale, 0/4–20mA

750-553: 4 canale, 0/4–20mA

750-555: 4 canale, 0–10V

6. Funcţie & Module speciale

Counter / Encoder

750-613: 2 canale, 500kHz counter

750-614: 1 canal, SSI absolute encoder

Comunicare

750-628: RS-232/RS-485 interface

750-652: IO-Link Master (4 ports)

Controla

750-630: proportional valve controller

750-640: RTC real-time clock module

7. Putere & Auxiliary Modules

7.1 Power Modules

750-600: System power supply, 24În DC

750-602: System + field power supply, 24În DC, with diagnostics

750-606: Ex i intrinsically safe power module

7.2 Auxiliary / End Modules

750-601: Potential distribution module (separates voltage potentials)

750-616: Spacer module (increases creepage distance in hazardous areas)

750-975: End module (termination)

Quick Selection Guide (Core Models)

PROFINET head station: First choice 750-377 (replaces 370)

Standard DI/DO: 8-channel commonly used 750-408 (DIN) / 750-523 (DO)

Standard AI/AO: 4-channel commonly used 750-455 (AI 4–20mA) / 750-553 (AO 4–20mA)

Temperature measurement: 750-460 for Pt100, 750-469 for thermocouples

Differences Between WAGO 750-370 şi 750-377

The core differences between WAGO 750-370 şi 750-377 lie in generation, redundancy support, diagnostic capability and power consumption. The 750-377 is a 3rd generation Eco Advanced version and the official direct replacement for the 750-370. It is mechanically compatible with DIN rail mounting and can be replaced directly.

Core Comparison Table

Detailed Key Differences

1. Redundancy & Fiabilitate (Core Upgrade)

The 750-377 supports S2 system redundancy, allowing connection to two PROFINET controllers with automatic switchover if the primary controller fails, greatly improving system availability; cel 750-370 does not support this function.

2. Diagnostics & Întreţinere

The 750-377 features enhanced Web-Based Management (WBM), supporting topology detection, SNMP monitoring and detailed status information for more efficient network and I/O troubleshooting; cel 750-370 only provides basic diagnostics.

3. Physical Dimensions & Layout

The 750-377 has a reduced width of 49.5 mm (aproximativ. 1.5 mm narrower than the 750-370) and lower weight (aproximativ. 107 g vs. 200 g), saving DIN rail space. Both are electrically compatible and can be replaced directly.

4. Discontinuation & Înlocuire

The 750-370 is discontinued, with the 750-377 as the only official direct replacement. Other 3rd generation options include the 750-375 (Versiunea de bază, simplified functions) şi 750-373 (Extreme version, wide temperature range -40…+70 °C).

Replacement Recommendations

Preferred replacement: Choose 750-377 for redundancy and enhanced diagnostics, suitable for new systems and long-term operation.

Budget-sensitive / no redundancy needed: Choose 750-375 (Versiunea de bază), similar functions to 377 with simplified features.

Extreme environments: Choose 750-373 (Extreme version) for -40…+70 °C wide temperature operation.

Both models share identical core electrical parameters and data capacity with low replacement cost. The main improvements of the 750-377 are the addition of S2 redundancy, enhanced diagnostics and a more compact physical design, making it the upgraded replacement for the 750-370.

Cross-Brand Model Comparison for WAGO 750-370

The WAGO 750-370 is a 2nd-generation PROFINET coupler and has been discontinued. Its official direct replacement is the 750-377. Below is a list of functionally equivalent and replaceable models sorted by brand/series, focusing on core matching features including PROFINET interface, 2-port switch, 24V DC power supply, and DIN rail mounting for easy replacement and project migration.

Core Comparison Table

Detailed Cross-Brand Comparison

1. Siemens

Model recomandat: 6ES7155-6AU01-0CN0 (ET 200SP IM 155-6 PN High Performance)

Protocol: PROFINET IO RT/IRT, compatible with Class B

Interface: 2×RJ45, 100Mbps switch

Power supply: 24În DC

Compatibilitate: Highly consistent in function with the 750-370, suitable for Siemens S7-1200/1500 controllers

Note de înlocuire: Must be configured as ET 200SP in TIA Portal; process data size (320B in / 320B out) matches the 750-370.

2. Phoenix Contact

Model recomandat: AXL F BK PN (Comanda nr. 2701815)

Protocol: PROFINET IO RT Class C, high real-time performance

Interface: 2×RJ45, 100Mbps wire-speed forwarding

Max. dispozitive: 63 unitati, close to the 64-module capacity of the WAGO 750 serie

Compatibilitate: Protectie IP20, Montare pe șină DIN, 24V DC power supply, highly compatible in physical and electrical parameters

Note de înlocuire: Configurable in third-party PLCs via GSDML files; supports topology detection and SNMP diagnostics, with better operation and maintenance capabilities than the 750-370.

3. Schneider Electric

Model recomandat: BMXFCW3000 (Modicon M340 Ethernet module)

Protocol: Supports PROFINET IO and Modicon bus

Interface: 2×RJ45, industrial Ethernet

Compatibilitate: Suitable for M340 series, 24V DC power supply, Montare pe șină DIN

Note de înlocuire: Requires configuration via Schneider SoMachine software; strong protocol compatibility but no S2 redundancy function.

4. Beckhoff

Model recomandat: EL6631-0010 (PROFINET IO terminal module)

Protocol: PROFINET IO RT Class B

Interface: Integrated in EtherCAT terminals, 2-port switch

Compatibilitate: Consistent protocol with the 750-370, supports up to 64 module expansions

Note de înlocuire: Suitable for Beckhoff CX series PLCs, configured via TwinCAT; strong real-time performance and diagnostic capabilities.

5. Rockwell Automation

Model recomandat: 1756-ENBT (ControlLogix Ethernet module)

Protocol: EtherNet/IP, requires gateway conversion to PROFINET

Compatibilitate: Supports 8-module expansion, industrial-grade reliability

Note de înlocuire: Requires an additional PROFINET gateway (de ex., 1756-PN2) for protocol interoperability; suitable for migration within Rockwell systems.

6. Domestic Alternative (Cost-Effective)

Inovance: AM600-PN

Protocol: PROFINET IO RT Class B

Interface: 2×RJ45, 100Mbps

Compatibilitate: 64-module expansion, 24V DC power supply, Montare pe șină DIN

Avantaje: Lower cost than imported brands, compatible with mainstream PLCs such as Siemens and Beckhoff, ideal for cost-sensitive projects.

Selection and Replacement Recommendations

1. First-choice replacement: Select the WAGO 750-377 — official direct replacement, fully compatible in dimensions (51mm latime), wiring and software, with S2 redundancy and enhanced diagnostics.
2. Siemens systems: Use the 6ES7155-6AU01-0CN0 for easy configuration and seamless connection with S7-1200/1500.
3. Phoenix Contact systems: Use the AXL F BK PN for high real-time performance and rich diagnostics, ideal for applications requiring high network stability.
4. Cost-sensitive projects: Choose the Inovance AM600-PN, with performance close to imported models at a better price, suitable for domestic substitution projects.

Consistent protocol: Prioritize PROFINET IO models to avoid latency and failures caused by protocol conversion.

Interface compatibility: Must retain a 2×RJ45 industrial Ethernet switch supporting wire-speed forwarding and auto-negotiation.

Power and mounting: 24V DC power supply, DIN 35mm rail mounting, IP20 protection to ensure physical replacement without hardware modification.

Expansion capacity: Support up to 64 I/O modules to meet the original configuration requirements of the 750-370.