A9P54603 Миниатюрный автоматический выключатель Schneider Electric

A9P54603 is a 1P+N миниатюрный автоматический выключатель (iC40N) from Schneider Electric’s Acti9 series, with a rated current of 3A and a Type C tripping curve. It is used for overload and short-circuit protection in terminal power distribution systems.

1. Core Product Parameters

1. Product Functions and Features
2. Core Protection Functions

Защита от перегрузки: Automatically cuts off the circuit when the current exceeds the rated value for a certain period (based on thermal-magnetic tripping principle)

Защита от короткого замыкания: Rapidly (in milliseconds) cuts off the circuit when a short-circuit fault occurs (sudden current surge)

Electrical Isolation: Provides a visible break point for easy inspection and maintenance

2. Technical Features

Thermal-Magnetic Tripping: Combines bimetallic strip thermal effect and electromagnetic tripping principle to provide both overload and short-circuit protection

Высокая отключающая способность: 10kA short-circuit breaking capacity, capable of reliably interrupting high-energy fault currents

Compact Design: Only 18mm wide, enabling dense installation in standard distribution boxes

PC Flame-Retardant Housing: Made of high-temperature resistant and flame-retardant material, ensuring safety and reliability with low flammability

Visual Trip Indicator: Clear red indicator after tripping for easy fault identification

III. Model Code Interpretation

A9P54603 Model Meaning:

A9: Acti9 Series (5th Generation)

П: Product Type Code (Protection Products)

546: Internal Series Code (iC40N Series)

03: Номинальный ток (3А)

1. Сценарии применения

The A9P54603 circuit breaker is suitable for the following scenarios:

1. Residential Power Distribution Systems:

– Lighting circuit protection (3A suitable for small lighting loads)

– Circuit protection for small electrical appliances (например, TVs, зарядные устройства, и т. д.)

2. Commercial and Industrial Applications:

– Control circuit protection (например, PLCs, реле, и т. д.)

– Power supply circuits for small equipment

– Protection of low-power electrical appliance groups in office areas

3. Специальные приложения:

– Smart home control systems

– DC side protection of solar inverters (requires matching with appropriate DC circuit breakers)

1. Comparison with Other Series

A9 Series vs E9 Series vs R9 Series:

E9 Series (4th Generation): Orange exterior, basic protection functions, cost-effective

A9 Series (5th Generation): Black exterior, improved performance, higher breaking capacity, and greater reliability

R9 Series (6th Generation): Green exterior, further optimized performance and intelligence

1. Меры предосторожности при использовании
2. Selection Matching: Ensure the load current does not exceed the circuit breaker’s rated current (3А) to avoid frequent tripping
3. Installation Specifications:

– Must be installed on a 35mm DIN rail to ensure good contact

– Terminal torque must meet requirements (usually 2.5Nm) to prevent poor contact and overheating

3. Рекомендации по техническому обслуживанию:

– Regularly inspect the circuit breaker for abnormal heating or damage

– Always disconnect the upstream power supply before replacement to ensure safety

4. Условия окружающей среды:

– Рабочая температура: -5℃~+40℃, avoid high-temperature or humid environments

– Altitude not exceeding 2000m to ensure insulation performance

Краткое содержание

A9P54603 is a reliable 1P+N miniature circuit breaker from Schneider Electric. Its 3A rated current and Type C curve make it particularly suitable for protecting small lighting and general power distribution circuits. As part of the Acti9 series, it combines safety, reliability, and compact design, making it a commonly used basic protection device in modern building electrical systems