ABB VBC7-30-01220-240V DC คอนแทคถอยหลังขนาดเล็ก

1. การตีความแบบจำลอง

Full Model: VBC7-30-01-05 (standard model, corresponding to 220-240V DC coil)

1. Core Technical Parameters
2. Basic Electrical Parameters

2. Performance Indicators

3. Environmental and Installation Parameters

III. คุณสมบัติการใช้งาน

1. Dedicated for Reversing Control: Built-in mechanical interlock ensures that forward and reverse contactors cannot be closed simultaneously, ensuring safety and reliability.
2. Quiet Operation: DC coil design eliminates the humming noise common in AC contactors, enabling silent operation.
3. Wide Voltage Adaptability: The coil supports a wide voltage range of 220-240V DC, adapting to different power supply conditions.
4. Overvoltage Protection: Built-in surge suppression diode effectively protects the coil and control circuit from voltage spikes.
5. Status Indication: Clear switch position indication facilitates on-site operation and fault diagnosis.
6. Flexible Installation: Supports both DIN rail and screw mounting methods, adapting to various control cabinet layouts.
7. High Reliability: With a mechanical service life of up to 10 million operations and long electrical service life, it is suitable for frequent operation scenarios.
8. ขอบเขตการสมัคร
9. การควบคุมมอเตอร์: Forward and reverse rotation control of three-phase asynchronous motors, เช่น:

Small conveyors and hoists

Fans and pumps (requiring reversible operation)

Packaging machinery and printing machinery

2. ระบบอัตโนมัติทางอุตสาหกรรม:

Control of auxiliary equipment in production lines

Output actuator for small PLC control systems

Equipment interlock control circuits

3. Commercial and Building Applications:

Fan control in air conditioning systems

Elevator door motors and small lifting platforms

Automatic door and rolling shutter door control

4. แอปพลิเคชั่นอื่น ๆ:

Control of battery-powered equipment (compatible with DC coil)

Auxiliary circuits of solar inverters

Small load control in marine and rail transit systems

1. Selection Suggestions
2. โหลดการจับคู่:

AC-3 loads (motor starting/operation): Max. 5.5กิโลวัตต์ (400วี), rated current 16A

AC-1 loads (resistive loads): Max. 20ก, 690วี

2. Control Voltage Confirmation: Ensure the coil voltage matches the system DC power supply (220-240V DC).
3. Auxiliary Contact Requirements: Standard configuration is 1NC; for more contacts, select the VBC7-30-10 series (1เลขที่) or expansion modules.
4. Installation Environment:

จำเป็นต้องลดพิกัดเมื่ออุณหภูมิเกิน 40°C (rated current decreases by 10% for every 10℃ rise)

Additional protective measures are needed in dusty and humid environments

5. Accessory Selection:

It is recommended to match with a surge suppressor (built-in for DC coils)

Optional auxiliary contact modules and thermal overload relays (เช่น, TA25DU series)

6. โมเดลทางเลือก:

Non-reversing version: BC7-30-01-05 (without mechanical interlock)

Different coil voltages: VBC7-30-01-01 (24V DC), VBC7-30-01-07 (12V DC)

1. การแก้ไขปัญหา

ปกเกล้าเจ้าอยู่หัว. Installation and Wiring Key Points

1. ก่อนการติดตั้ง, confirm that the coil voltage is 220-240V DC, matching the control power supply.
2. For reversing control, ensure that the mechanical interlock of the two contactors (forward/reverse) is correctly installed to prevent phase-to-phase short circuit.
3. Main circuit wiring: Connect L1, L2, L3 to the power supply, and T1, T2, T3 to the motor; pay attention to the phase sequence (when switching between forward and reverse rotation).
4. Control circuit wiring: Connect coil terminals A1 and A2 to the 220-240V DC power supply; pay attention to polarity (some models have no polarity requirements).
5. Auxiliary contact wiring: The 1NC contact can be used for interlock control or status indication; pay attention to the rated current of the contact (usually 5A).
6. Installation spacing: Keep a distance of at least 5mm from other components to ensure good heat dissipation.
7. Pre-power-on inspection:

Check if the mechanical interlock operates flexibly and reliably

Check if the contacts are in good contact

Check if the coil wiring is correct

ABB VBC7-30-01 Core Parameter and Price Comparison Table with Same Series and Competitor Models

1. Comparison of ABB Same Series Models (พารามิเตอร์หลัก)

1. Comparison of ABB VBC7-30-01 with Competitor Models (พารามิเตอร์หลัก + ราคา)

III. Price and Selection Replacement Summary

1. Same Series Replacement Recommendations

2. Cross-Brand Replacement Recommendations

3. จุดเลือกที่สำคัญ
4. โหลดการจับคู่: Select the corresponding rated current for standard loads; for heavy-duty applications, it is recommended to choose one size larger (เช่น, VBC7→Schneider LC1D25FD).
5. Control Voltage: Ensure the coil voltage matches the system DC power supply (220-240V DC).
6. ติดต่อเสริม: Select 1NC/1NO or versions with more contacts according to the control circuit requirements.
7. พื้นที่ติดตั้ง: Integrated reversing contactors (ABB VBC7/Schneider LC1D) save about 40% space compared to dual-contactor combinations.
8. Cost Control: Same-brand replacement has the lowest cost; cross-brand replacement needs to consider installation adaptability and system compatibility.