Banner SBFX1 Multi-Beam Fiber Optic Scanner Module

The SBFX1 is a high-power fiber optic scanner module in the MULTI-BEAM series manufactured by Banner Engineering, serving as one of the core components of a modular photoelectric sensor system. It integrates both emitter and receiver, and can be connected to one bifurcated fiber assembly or two separate fiber cables. Featuring industry-leading excess gain, it is designed for long-range through-beam fiber optic detection in harsh industrial environments.

1. Model Number Breakdown

2. Core Technical Specifications

3. Operating Environments and Typical Applications
4. Harsh industrial environments: High excess gain ensures reliable operation in dusty, oily, and humid conditions.
5. Detection in confined spaces: Fiber extension enables sensing in locations where the sensor body cannot be mounted.
6. Small target detection: Works with miniature bifurcated fibers as small as 0.5 mm diameter for precise detection.
7. Long-range through-beam: Supports extended sensing ranges with suitable fibers (note: for ultra-long ranges, the separate emitter/receiver combination SBEXF/SBRXF1 is recommended).
8. Irregularly shaped targets: Fiber sensing tips can be custom-shaped to match specific target profiles.

การใช้งานทั่วไป:

Part positioning and counting on automated production lines

Material presence detection on packaging equipment

Level and fill detection in food and beverage industry

Component assembly verification in automotive manufacturing

Wafer and component inspection in semiconductor industry

4. Replacement Models and Series Comparison

4.1 Direct Replacement Models

4.2 Complete SB Series Fiber Optic Scanner Model List

5. Usage Notes
6. Fiber Selection:

Through-beam mode: Recommended IT13S (1.6 mm diameter) or IT23S (3.18 mm diameter) separate fiber pairs

Diffuse mode: Recommended BT13S (1.6 mm diameter) or BT23S (3.18 mm diameter) bifurcated fibers

Long-distance applications: SBEXF/SBRXF1 separate combination recommended instead of SBFX1

2. Power and Logic Modules:

Must be used with a 3-wire or 4-wire power module (เช่น, PBT, PBP, PBO, PBAT, ฯลฯ)

Logic modules (LM series) provide timing functions and light/dark operate selection

Power must be disconnected before changing light/dark operate jumpers

3. Installation and Setup:

Adjust sensitivity only after fiber alignment

AID™ indicator pulse frequency below 2 Hz indicates insufficient detection margin; clean fibers or realign as needed

Avoid use in strong electromagnetic interference environments; use shielded cable if necessary

4. การซ่อมบำรุง:

Regularly clean fiber end faces to prevent oil and dust from affecting accuracy

Inspect fibers for damage or excessive bending (minimum bend radius 19 มม)

No special maintenance required for the sensor body; VALOX® housing offers excellent corrosion resistance

6. Official Ordering Information

Banner Engineering Product Model List

Banner Engineering is a global leader in industrial automation sensors, offering technologies including photoelectric, laser, ultrasonic, radar, and vision sensing, as well as machine safety, lighting, and wireless solutions. Below is a categorized list of major product series and representative models.

1. Photoelectric Sensors

2. Laser Distance Measurement Sensors

3. Ultrasonic Sensors

4. Radar Sensors

5. Fiber Optic Amplifiers

6. Vision Sensors

7. Machine Safety Products

8. Lighting & Indication Products

9. Other Product Series

Official Sources for Complete Model Lists

Comprehensive Product Catalog:

https://info.bannerengineering.com/cs/groups/public/documents/literature/b_51159666.pdf

Model Naming Convention

Banner model numbers typically include:

Series identifier (เช่น, Q12, S18, QS18, LM)

Detection mode (เช่น, AF = background suppression, FF = foreground suppression, VN = through-beam receiver, VP = through-beam emitter)

Output type (เช่น, N = PNP, P = NPN, B = dual polarity)

Connection type (เช่น, Q5 = 5-pin M12 connector, QD = quick disconnect, C = cable)

Special features (เช่น, IQ = IO-Link, Pro = advanced functions)

Complete Guide to Industries for Banner Vision Sensors

Banner vision sensors (represented by the iVu series) feature an all-in-one design, touchscreen operation, and PC-free programming. They are widely used in packaging, food and beverage, automotive, electronics, ยา, logistics, การพิมพ์, and other industrial sectors, especially for high-speed production line quality inspection, positioning, and traceability.

1. Core Industries and Typical Applications
2. บรรจุภัณฑ์

Key applications: Label inspection, seal integrity, packaging defects, date/lot code identification, carton closure verification

Label alignment and content verification (iVu series)

Carton sealing tape integrity and position check

Blister pack fill detection

Shrink wrap seal verification

Printed pattern integrity and consistency on packaging

2. Food & Beverage

Key applications: Cap inspection, level monitoring, container integrity, production date/batch traceability, color sorting

Presence, tightening, and color verification of bottle/can caps

Liquid level detection in transparent containers (iVu Color)

Foreign object detection in food packaging

Label position and content verification

Color consistency of multi-color packaging

Can lid seal integrity inspection

3. Automotive

Key applications: Component assembly verification, surface defect detection, color matching, dimension measurement, barcode reading

Color inspection of door panel components (iVu Color)

Bolt/nut presence and seating verification

Windshield/sunroof installation inspection

Body weld quality inspection

Electronic marking verification and traceability

Bearing assembly status check

4. Electronics

Key applications: Component presence, pin integrity, solder quality, orientation detection, small dimension measurement

IC solder ball inspection (iVu BCR)

Connector pin count and position verification

PCB drill hole count and position inspection

Electronic component orientation and polarity check

Presence detection of small parts (resistors, ตัวเก็บประจุ)

SMT solder joint quality inspection

5. Pharmaceutical & Medical

Key applications: Drug package verification, syringe/infusion set inspection, blister pack inspection, label compliance, cleanroom use

Drug bottle label position and content verification

Syringe plunger position and seal integrity

IV bag leak and integrity detection

Tablet/capsule fill status in blister packs

Production date/expiration identification and traceability

Medical device assembly correctness verification

6. Logistics & Postal

Key applications: Barcode/RFID reading, parcel sorting, volume measurement, address recognition, bundle verification

Industrial barcode reading (iVu BCR series) for parcel sorting and tracking

End-of-mail bundle detection

Parcel dimension and shape inspection for automated sorting

Orientation and position verification of stacked mail

Logistics label content correctness and integrity check

7. Printing

Key applications: Print quality inspection, registration accuracy, color consistency, missing print detection, barcode quality verification

Printed material color deviation detection (iVu Color)

Label print integrity and clarity check

Packaging print registration accuracy verification

Barcode print quality grading (A/B/C/D/F)

Print defect detection (spots, scratches)

8. Other Major Industry Applications

2. Industry Compatibility of Main Banner Vision Sensor Series

3. Advantages of Banner Vision Sensors in Industrial Applications
4. Ease of Use: All-in-one design with touchscreen operation; no PC programming required for fast on-site setup.
5. Environmental Robustness: IP67 rating, resistant to vibration, น้ำมัน, and dust in harsh industrial environments.
6. Rapid Deployment: Pre-configured inspection templates for common applications reduce setup time.
7. Multi-Function Integration: One device performs multiple inspections (presence + dimension + color), lowering system cost.
8. Communication Capability: Supports Ethernet/IP, โปรฟิเน็ต, โมดบัส, and other industrial protocols for seamless automation integration.

Banner vision sensors are a preferred solution for production line quality control and traceability across global industries due to their ease of use, powerful functionality, and strong environmental adaptability. Whether inspecting labels on high-speed packaging lines, detecting small components in electronics factories, or verifying assembly in automotive production, Banner vision sensors deliver reliable, high-efficiency inspection.