Type NLL-2 Aluminum Alloy Bolted Tension Clamp

Type NLL-2 is a bolted tension clamp made of high-strength aluminum alloy. As a key component of power fittings for overhead lines, its main function is to fix conductors on tension towers and bear the tension of the line.

วัสดุ: High-strength aluminum alloy (distinguished from the malleable cast iron material of the NLD series)

Structure: Integrally cast, with conductors fastened by U-bolts to form a reliable connection

แรงดันไฟฟ้าที่ได้รับการจัดอันดับ: Suitable for overhead lines of 35kV and below

Protection Performance: Can be used with insulating protective sleeves and is applicable to insulated conductors

Technical Parameters

สถานการณ์การใช้งาน

Tension Sections of Overhead Lines: Used on tension towers at line corners, terminals or straight sections to fix aluminum stranded conductors or steel-cored aluminum stranded conductors

Insulated Conductor Systems: Used with insulating protective sleeves for fixing and protecting insulated overhead conductors

Distribution Network Construction: Widely applied in the construction of urban and rural distribution network lines

Key Operation Instructions

1. Confirm that the conductor specification matches the clamp model before installation
2. Use a torque wrench to tighten the U-bolts according to the specified torque (usually 40~50N·m)
3. For insulated conductors, install the insulating protective sleeve first before mounting the clamp
4. After installation, check that the clamp is in tight contact with the conductor without any looseness

ข้อควรระวัง

– It is strictly prohibited to use on lines exceeding the rated voltage

– For conductors of different materials (เช่น, copper-aluminum connection), select special transition clamps

– Regularly inspect the clamp connection for abnormalities such as looseness and corrosion

Comparison with Similar Products

The NLL series is divided into five specifications from NLL-1 to NLL-5 according to the ascending order of conductor diameter. Type NLL-2 is suitable for medium-diameter conductors. Compared with the cast iron NLD series, the aluminum alloy NLL series has advantages such as light weight, good electrical conductivity and strong corrosion resistance, making it especially suitable for use in coastal and humid areas.

The Type NLL-2 Aluminum Alloy Bolted Tension Clamp is an important power fitting for fixing medium-specification conductors and bearing tension in overhead power lines. It features a simple structure, convenient installation and reliable strength, and is a standard power equipment commonly used in distribution network construction and renovation.

บันทึก: Specific technical parameters may vary slightly depending on the manufacturer. It is recommended to refer to the detailed specification sheet provided by the manufacturer when purchasing.