المقاولين,قاطع الدائرة,العاكس للطاقة الشمسية,عداد كهرباء,البطاريات الشمسية
Eaton Moeller M22-LEDC-IEC-EN60947-5-1 LED Indicator Light
Eaton Moeller® RMQ-Titan series M22-size LED indicator element, complying with IEC/EN 60947-5-1 standard for control circuit electrical appliances. It adopts base mounting and screw terminal connection, fits 22.5mm panel cutout, and is applicable for signal indication on industrial control panels.
- تعريف الجزء النموذجي
| شريحة | معنى | وصف |
| م22 | سلسلة المنتجات | Eaton Moeller RMQ-Titan series, suitable for standard 22.5mm panel cutout |
| LEDC | نوع المنتج | LED indicator element; C stands for Base Fixing, differentiated from front mounting (قاد) and cage clamp terminal (CLED) |
| IEC-EN60947-5-1 | Executive Standard | Complies with IEC and European EN standards for control circuit equipment; applicable to electromechanical control circuits for control, signaling and interlock functions. Max rated voltage: 1000الخامس و / 600في العاصمة |
| [Color Suffix] | Indicator Color | ر(أحمر), ز(أخضر), ب(Blue), دبليو(White), إلخ. |
| [Voltage Suffix] | الجهد المقنن | No suffix = 12–30V AC/DC; 230 = 85–264V AC |
- المواصفات الأساسية
| فئة المعلمة | Technical Data | ملاحظات |
| General Characteristics | ||
| نوع المنتج | LED Indicator Element | Base mounting, screw terminal connection |
| ماركة | Eaton Moeller® | RMQ-Titan Series |
| نوع التركيب | Base Fixing | Differentiated from Front Fixing |
| نوع الاتصال | Screw Terminals | Alternative available: CLED series with cage clamp terminals |
| Panel Cutout | Standard 22.5mm | Compliant with M22 series standard |
| Electrical Ratings | ||
| تصنيف جهد التشغيل (إي) | 12–30V AC/DC (no suffix); 85–264V AC (230 لاحقة) | 50/60Hz compatible |
| تصنيف التشغيل الحالي (أي) | 8–15mA | Slight variation by model |
| تصنيف الجهد العزل (واجهة المستخدم) | 250V | Meets Overvoltage Category III requirements |
| استهلاك الطاقة | تقريبا. 0.3دبليو | Low-power LED design |
| حماية الدخول | IP66/IP69K | مناسبة للبيئات الصناعية القاسية |
| Physical Dimensions | ||
| Dimension (الطول × العرض × الارتفاع) | 38mm×37mm×10mm | هيكل مدمج |
| وزن | تقريبا. 0.011كجم | Lightweight installation |
| Color Options | أحمر(ر), أخضر(ز), Blue(ب), White(دبليو) | Covers various signal indication demands |
| الظروف البيئية | ||
| درجة حرارة التشغيل | -30درجة مئوية ~ +70 درجة مئوية | نطاق درجة حرارة واسعة |
| درجة حرارة التخزين | -40درجة مئوية ~ +70 درجة مئوية | Adapt to severe storage conditions |
| اهتزاز / مقاومة الصدمات | متوافق مع IEC 60068 | Industrial reliability |
| الشهادات & المعايير | ||
| Main Standards | إيك/إن 60947-5-1, أول 508, CSA C22.2 No.94-91 | Global multi-standard approval |
| علامات التصديق | م, أول, وكالة الفضاء الكندية | Compliant with international safety norms |
- قائمة الملحقات & Mounting Parts
| رقم الجزء. | اسم | وظيفة | طلب |
| M22-CK10 | LED Mounting Bracket | Provides contact and mounting support for LED indicator | Control panel installation, improved stability |
| M22-K01 | Mounting Fitting | Ensures reliable installation of LED indicators | General industrial & commercial use |
| M22-A | Adapter | Adapts to special mounting requirements | Special panel or installation conditions |
| M22-XX | Pushbutton / Indicator Head | Assembles with LED element to form complete unit | Full signal indication assembly |
| كتلة المحطة الطرفية | Screw Terminal | Wire connection | 0.25–1mm² flexible wire (مع الطويق); 0.75–1.5mm² solid wire |
- Cross-Brand Equivalent Replacement
| ماركة | نموذج الاستبدال | Similar Features | الاختلافات |
| شنايدر | XB2BVM3LC | 22.5mm mounting, قاد, base type | Different terminal type; some versions with spring terminals |
| سيمنز | 3SU1801-0AB60-0AA0 | 22mm mounting, قاد, 12–30V AC/DC | Minor dimension & mounting difference |
| ايه بي بي | CL2-503G | 22mm mounting, قاد, base type | Different color options and voltage range |
| Eaton Internal Replacement | M22-CLED Series | نفس السلسلة, قاد, base mounting | Cage clamp terminals, tool-free wiring |
| Eaton Internal Replacement | M22-LED Series | نفس السلسلة, قاد | Front mounting design for different panel layouts |
- إرشادات الاختيار & Replacement Solutions
5.1 Key Selection Parameters
| المعلمة | اختيار النقاط الرئيسية | Recommended Specification |
| مطابقة الجهد | Must match control system voltage | 12–30V AC/DC (common control circuit); 85–264V AC (direct mains supply) |
| نوع التركيب | LEDC base mounting for rear maintenance; LED front mounting for easy front installation | Base mounting recommended inside cabinet; front mounting for external panel |
| نوع المحطة | Screw terminals for low-vibration environments; cage clamp (CLED) for frequent rewiring | Cage clamp terminals preferred for industrial vibration sites |
| Color Selection | Industry standard: أحمر(Alarm/Stop), أخضر(Running/Normal), Blue(Standby/Ready), White(General Indication) | Select according to equipment signal logic |
| حماية الدخول | IP66/IP69K required for outdoor / dusty sites | Minimum IP65 recommended for industrial use |
5.2 توصيات الاستبدال
Voltage mismatch: Select model with corresponding voltage suffix (على سبيل المثال. M22-LEDC230-R for 230V AC)
Terminal type change: Replace with M22-CLED series (cage clamp), tool-free wiring, higher efficiency
Mounting type adjustment: Replace with M22-LED series (front mounting) for limited panel space
Higher brightness required: Adopt M22-FLED-HP high-power LED series, brightness increased by over 30%
5.3 Application Precautions
- Ensure 22.5mm panel cutout accuracy during installation to avoid degradation of protection rating.
- Pay attention to polarity when wiring (some LED models are polarity-sensitive).
- Avoid long-term operation above 70°C to extend LED service life.
- Regularly check terminal tightening to prevent loosening caused by vibration.
- متوافق مع IEC 60947-5-1: only for control circuit signal indication; not allowed for direct main circuit load control.
- سيناريوهات التطبيق النموذجية
Status indication for industrial automated production lines
Signal display of electrical control cabinets
عملية / fault alarm for mechanical equipment
Status monitoring of safety systems
Signal feedback of process control systems
Application Scenarios of M22-LEDC-IEC-EN60947-5-1
تعريف: Eaton M22 series 22.5mm base-type LED indicator core, compliant with EN/IEC 60947-5-1 control circuit equipment standard.
Only used for control loop signal indication; not for main circuit load control. Fits standard 22.5mm cutout of industrial control cabinets and equipment panels.
- سيناريوهات التطبيق الرئيسية
1.1 Electrical Control Cabinet / PLC Cabinet
Power-on ready, operation standby, fault alarm and emergency stop indication inside cabinet
PLC module communication, remote/local mode, auto/manual gear status lights
Panel indication for inverter, soft starter running, overload and fault signals
1.2 Industrial Automated Production Lines
Workstation standby, running, completion and material shortage alarm
Robot home position ready, action executing and fault shutdown indication
Conveyor start/stop, material jam, deviation and overload status signals
1.3 OEM Mechanical Equipment
أدوات الآلة, آلات صب الحقن, packaging machines, printing machines, ضواغط الهواء, المشجعين & مضخات المياه:
Equipment power-on, standby, running, lubrication fault, over temperature and overload alarm
Safety door open/close, protection interlock status, hydraulic/pneumatic pressure indication
1.4 التدفئة والتهوية وتكييف الهواء / Water Supply & Drainage / Building Electromechanical
Central air conditioning unit, cooling tower, water pump start/stop, fault and overload indication
Fire smoke exhaust fan, spray pump, pressure maintaining pump running/fault panel signal
Status indicator lights for basement distribution rooms and machine room power cabinets
1.5 Lifting & Logistics Equipment
Overhead cranes, gantry cranes, مصاعد, automated warehouses, forklift electric control panels:
Lift limit reaching, limit trigger, overload alarm and travelling operation status
Safety circuit on/off, emergency stop reset and mechanism ready indication
1.6 الطاقة الجديدة & Industrial Control Supporting
PV inverter cabinet, wind power control cabinet, energy storage distribution cabinet:
Grid-connection ready, inverter running, islanding protection and fault alarm
AC/DC live circuit and communication normal status indication
1.7 حماية البيئة & معالجة المياه
Sewage plant, water purification station, dosing system, grille machine, aeration equipment:
Equipment start/stop, tank liquid level high/low, مضخة & valve on/off, instrument fault indication
1.8 Operation Console / Security & التحكم الصناعي
Status lights matched with central control console buttons, access control cabinet status indication
Mode switching, interlock activation and alarm prompt for workshop remote console
- Suitable Working Conditions
Indoor & outdoor industrial dusty and slightly humid workshops (IP66 protected)
Slightly vibrating equipment panels and vehicle-mounted industrial control cabinets
Wide operating temperature: -30درجة مئوية ~ +70 درجة مئوية
Power supply scenarios: 12–30V AC/DC, 220V AC conventional control loops
- Specification Restrictions (per EN60947-5-1)
- For signal indication only; strictly prohibited to directly drive high-power loads such as contactors and heaters.
- Limited to control circuits and auxiliary loops only; not permitted for main power circuit switching.
- Must be assembled with M22 series indicator head and mounting base; cannot be installed on panel alone.
Eaton Moeller LED Indicator Light Series Model List
- Series Classification & Naming Rule
1.1 Main Product Series
| مسلسل | Mounting Cutout | الميزات الأساسية | طلب |
| M22 Series | 22.5mm standard cutout | RMQ-Titan modular design, IP66/IP69K | Mainstream for industrial control cabinets & equipment panels |
| M30 Series | 30mm standard cutout | حجم أكبر, high brightness, multiple mounting methods | معدات خارجية & long-distance observation |
| A22 Series | 22.3mm standard cutout | Economy type, chrome bezel, IP65 | الرقابة الصناعية العامة, non-harsh environment |
| C22 Series | 22.3mm standard cutout | تصميم مدمج, توفير المساحة | المعدات الصغيرة & embedded installation |
Element Type: LEDC(Base mount, screw terminal), CLED(Base mount, cage clamp), قاد(Front mount), LCLED(Integrated LED)
لون: ر(أحمر), ز(أخضر), ب(Blue), ي(Yellow), دبليو(White), أ(Amber)
الجهد االكهربى: No suffix=12–30V AC/DC; 230=85–264V AC; 110=90–130V AC; 24=24V DC
Special Feature: BVP(Blister pack), HP(High Power High Brightness), DUAL(Dual Color)
- M22 Series LED Element Models (Core Modules)
2.1 M22-LEDC Series (Base Mount, Screw Terminal)
| نموذج | لون | الجهد المقنن | رقم الجزء. | ملاحظات |
| M22-LEDC-R | أحمر | 12–30V AC/DC | 216561 | Compliant with IEC/EN 60947-5-1 |
| M22-LEDC-G | أخضر | 12–30V AC/DC | 216560 | Base fixed, screw terminal |
| M22-LEDC-B | Blue | 12–30V AC/DC | 216559 | Power consumption approx. 0.3دبليو |
| M22-LEDC-Y | Yellow | 12–30V AC/DC | 216558 | Operating temp -30°C~+70°C |
| M22-LEDC-W | White | 12–30V AC/DC | 216557 | IP66/IP69K |
| M22-LEDC230-R | أحمر | 85–264V AC | 216565 | Wide voltage design |
| M22-LEDC230-G | أخضر | 85–264V AC | 216564 | Suitable for industrial mains |
| M22-LEDC230-B | Blue | 85–264V AC | 216563 | 50/60Hz compatible |
| M22-LEDC230-Y | Yellow | 85–264V AC | 216562 | Rated current 8–15mA |
| M22-LEDC230-W | White | 85–264V AC | 216563 | Insulation voltage 250V |
2.2 M22-CLED Series (Base Mount, Cage Clamp Terminal)
| نموذج | لون | الجهد المقنن | رقم الجزء. | ملاحظات |
| M22-CLED-R | أحمر | 12–30V AC/DC | Y7-218060 | Tool-free fast wiring |
| M22-CLED-G | أخضر | 12–30V AC/DC | Y7-218061 | Vibration-resistant clamp connection |
| M22-CLED-B | Blue | 12–30V AC/DC | Y7-218062 | Fits 0.25–1mm² flexible wire |
| M22-CLED-Y | Yellow | 12–30V AC/DC | Y7-218063 | Fits 0.75–1.5mm² solid wire |
| M22-CLED-W | White | 12–30V AC/DC | Y7-218064 | IP66 |
| M22-CLED230-R | أحمر | 85–264V AC | Y7-218065 | الجهد واسعة |
| M22-CLED230-G | أخضر | 85–264V AC | Y7-218066 | Rated current 8–15mA |
2.3 M22-LED Series (Front Mount)
| نموذج | لون | الجهد المقنن | رقم الجزء. | ملاحظات |
| M22-LED-R | أحمر | 12–30V AC/DC | 216553 | Front fixed, easy front maintenance |
| M22-LED-G | أخضر | 12–30V AC/DC | 216552 | Space-saving for narrow panels |
| M22-LED-B | Blue | 12–30V AC/DC | 216551 | Dimension 38×37×10mm |
| M22-LED-Y | Yellow | 12–30V AC/DC | 216550 | Weight approx. 0.011كجم |
| M22-LED-W | White | 12–30V AC/DC | 216549 | IP66/IP69K |
| M22-LED230-R | أحمر | 85–264V AC | 216557 | الجهد واسعة |
| M22-LED230-W | White | 85–264V AC | 216563 | Industrial mains compatible |
- Complete M22 Indicator Models (With Operating Head)
3.1 Flush Type Complete Indicators
| نموذج | لون | الجهد االكهربى | Head Type | رقم الجزء. | ملاحظات |
| M22-L-R | أحمر | 12–30V AC/DC | Flush | 216772 | Complete indicator with LED element |
| M22-L-G | أخضر | 12–30V AC/DC | Flush | 216773 | IP66 |
| M22-L-B | Blue | 12–30V AC/DC | Flush | 216775 | 22.5mm mounting diameter |
| M22-L-Y | Yellow | 12–30V AC/DC | Flush | 216774 | Modular structure |
| M22-L-W | White | 12–30V AC/DC | Flush | 216776 | Lifespan 100,000 ساعات |
| M22-L-R-LED230 | أحمر | 85–264V AC | Flush | 132600 | الجهد واسعة |
| M22-L-G-LED230 | أخضر | 85–264V AC | Flush | 132602 | BVP blister package |
| M22-L-B-LED230-BVP | Blue | 85–264V AC | Flush | 132611 | Retail packaging |
3.2 Extended Convex Type Complete Indicators
| نموذج | لون | الجهد االكهربى | Head Type | رقم الجزء. | ملاحظات |
| M22-LCH-R | أحمر | 12–30V AC/DC | Convex Taper | 216777 | Good long-distance visibility |
| M22-LCH-G | أخضر | 12–30V AC/DC | Convex Taper | 216778 | IP66 |
| M22-LCH-B | Blue | 12–30V AC/DC | Convex Taper | 216779 | 22.5mm mounting diameter |
| M22-LCH-Y | Yellow | 12–30V AC/DC | Convex Taper | 216781 | تصميم وحدات |
| M22-LCH-W | White | 12–30V AC/DC | Convex Taper | 216914 | Compatible with multiple light sources |
- Special Function LED Indicators
4.1 Dual / Multi-Color LED Indicators
| نموذج | Color Combination | الجهد االكهربى | نوع التركيب | رقم الجزء. | ملاحظات |
| M22-LED-DUAL-RG | Red/Green | 12–30V AC/DC | Front mount | 180800 | Independent control for two colors |
| M22-LEDC-DUAL-BY | Blue/Yellow | 12–30V AC/DC | Base mount | 180801 | Screw terminal connection |
| M22-CLED-DUAL-RW | Red/White | 12–30V AC/DC | Base mount | 180802 | Cage clamp terminal |
| M22-L-DUAL-RG | Red/Green | 12–30V AC/DC | Flush complete unit | 180803 | Full assembly with head |
4.2 High Power (HP) LED Indicators
| نموذج | لون | الجهد االكهربى | نوع التركيب | رقم الجزء. | ملاحظات |
| M22-LEDC-HP-R | أحمر | 12–30V AC/DC | Base mount | 216570 | Brightness increased over 30% |
| M22-CLED-HP-G | أخضر | 12–30V AC/DC | Base mount | 216571 | Ideal for long-distance viewing |
| M22-LED-HP-B | Blue | 85–264V AC | Front mount | 216572 | Wide voltage design |
- M30 Series LED Indicator Models
| نموذج | لون | الجهد االكهربى | نوع التركيب | رقم الجزء. | ملاحظات |
| M30-L-R | أحمر | 12–30V AC/DC | Flush | 183282 | 30mm mounting diameter |
| M30-L-G | أخضر | 12–30V AC/DC | Flush | 183283 | IP66 |
| M30-L-B | Blue | 85–264V AC | Flush | 183284 | الجهد واسعة |
| M30C-FL-Y | Yellow | 12–30V AC/DC | Flush, metal bezel | 183285 | Enhanced durability |
| M30-LEDC-R | أحمر | 12–30V AC/DC | Base mount | 216580 | Screw terminal connection |
- A22 Series LED Indicator Models
| نموذج | لون | الجهد االكهربى | نوع التركيب | رقم الجزء. | ملاحظات |
| A22-LCLED24-R | أحمر | 24في العاصمة | Integrated | 108186 | 22.3mm mounting diameter |
| A22-LCLED24-G | أخضر | 24في العاصمة | Integrated | 108187 | Economy type |
| A22-LCLED110-Y | Yellow | 90–130V AC | Integrated | 108194 | Chrome front bezel |
| A22-LCLED230-B | Blue | 85–264V AC | Integrated | 108195 | الجهد واسعة |
| A22-LCLED380AC-W | White | 380الخامس و | Integrated | 108206 | Industrial high voltage applicable |
- Accessory Models
| رقم الجزء. | اسم | سلسلة قابلة للتطبيق | وظيفة |
| M22-CK10 | LED Mounting Bracket | م22 | LED contact support & fixing |
| M22-K01 | Mounting Fitting | م22 | Reliable indicator installation |
| M22-A | Adapter | م22 | Special mounting adaptation |
| M22-LCH | Convex Taper Head | م22 | Improve long-distance visibility |
| M22-L | Flush Head | م22 | Standard panel mounting |
- اختيار المرجع السريع
| متطلبات | Recommended Series | Key Parameter Selection |
| Standard industrial cabinet | M22-LEDC | 12–30V AC/DC, أحمر(Alarm), أخضر(جري) |
| Frequent rewiring & صيانة | M22-CLED | Cage clamp terminal, خالية من الأدوات |
| Convenient front panel installation | M22-LED | Front mounting, space saving |
| Long-distance observation | M22-LCH / M30-L | Convex head + high brightness LED |
| Wide voltage mains application | M22-LEDC230 | 85–264V AC, global mains compatible |
| Dual-color signal indication | M22-LED-DUAL | Red/Green or Blue/Yellow combined independent control |
