المقاولين,قاطع الدائرة,العاكس للطاقة الشمسية,عداد كهرباء,البطاريات الشمسية
تعريف رمز النموذج
BNS 33-02Z-2187 (رقم الطلب: 101128792)
| شريحة | معنى | وصف |
| BNS | سلسلة المنتجات | Schmersal coded magnetic safety sensor, non-contact design, لا ارتداء الميكانيكية |
| 33 | كود السلسلة | Standard BNS33 series, dimension 88mm×25mm×13mm, side sensing area |
| 2 | تكوين الاتصال | 2 Normally Closed contacts, compliant with EN ISO 13849-1 safety standard |
| ز | Indicator Status | لا يوجد مؤشر LED (G stands for LED equipped) |
| 2187 | وظيفة خاصة | Independent contact output, side actuation, standard low coding level |
- معلمات المواصفات الأساسية
| فئة | مواصفة | ملاحظات |
| Basic Characteristics | ||
| مبدأ العمل | Magnetic actuated, reed contact, non-contact type | Coded design, only compatible with BPS 33/BPS 33-2326 actuators |
| Coding Level | قليل (في ايزو 14119) | Prevent bypass by simple magnet, enhance safety performance |
| تصنيف السلامة | القطة 4 / PL.e (with safety monitoring module) | Conforms to BG-GS-ET-14, EN IEC 60947-5-3 |
| المعلمات الكهربائية | ||
| ماكس تحويل الجهد | 100الخامس التيار المتناوب/تيار مستمر | Applicable for low voltage safety circuits |
| ماكس التبديل الحالي | 0.25أ | |
| Max Switching Power | 3دبليو | |
| Switching Frequency | Max 5Hz | Suitable for low-speed safety door monitoring |
| Mechanical Parameters | ||
| نوع التركيب | Non-recessed installation | Concealable mounting, tolerant to lateral misalignment |
| مواد الإسكان | Glass fiber reinforced thermoplastic | Impact resistant, self-extinguishing property |
| فئة الحماية | IP67 | مقاوم للغبار ومقاوم للماء, مناسبة للظروف الصناعية القاسية |
| Switching Distance | Safe closing Sao: 5mm/8mm | Subject to actuator type |
| Safe opening Sar: 15mm/18mm | ||
| نوع الاتصال | 1m cable, 0.25مم² (23الفريق العامل المخصص), PVC sheath | M8 connector version available (suffix ST) |
| المعلمات البيئية | ||
| درجة حرارة التشغيل | -25درجة مئوية ~ +70 درجة مئوية | |
| مقاومة الاهتزاز | 10…55Hz, amplitude 1mm | |
| مقاومة الصدمات | 30ز / 11آنسة | |
| خدمة الحياة | B10D: 25,000,000 العمليات (الاتصال NC) | Wear-free structure for long service life |
- Cross-brand Replacement Comparison
| ماركة | نموذج | التشابه | الاختلافات |
| Schmersal | BNS33-02Z-2187 | Reference model | Original coding, perfect match with BPS 33 actuator |
| Telemecanique | XCSDMP702 | 2اتصالات NC, magnetic coding, IP67 | Different dimension, incompatible coding protocol |
| اومرون | D4NS-2AF | Non-contact safety door switch, 2نورث كارولاينا | هيكل ميكانيكي مختلف, dedicated actuator required |
| Sick | MPS200-211 | Magnetic safety sensor, IP67 | Shorter sensing distance, different coding mode |
| Banner | MGS136-20 | Coded magnetic switch, 2نورث كارولاينا | Different connection mode, price discrepancy |
ملاحظات الاستبدال
- Coded magnetic safety sensors must be paired with actuators of identical brand and series
- Reassess safety compliance when switching brands
- Original parts recommended for optimal performance and safety
- قائمة نماذج السلسلة الكاملة (Core BNS33 Models)
| نموذج | Contact Type | قاد | اتصال | وظيفة خاصة | رقم الطلب. |
| BNS33-02Z-2187 | 2نورث كارولاينا | لا | 1m Cable | Independent contact output | 101128792 |
| BNS33-02ZG-2187 | 2نورث كارولاينا | نعم | 1m Cable | Independent contact output | 101128793 |
| BNS33-02Z-ST-2187 | 2نورث كارولاينا | لا | M8 Connector | Independent contact output | 101173053 |
| BNS33-02Z-2187-3M | 2نورث كارولاينا | لا | 3m Cable | Independent contact output | 101137363 |
| BNS33-11Z-2187 | 1NO/1NC | لا | 1m Cable | Independent contact output | – |
| BNS33-12Z-2187 | 1NO/2NC | لا | 1m Cable | Independent contact output | – |
| BNS33-11ZG-2187 | 1NO/1NC | نعم | 1m Cable | Independent contact output | – |
| BNS33-12ZG-2187 | 1NO/2NC | نعم | 1m Cable | Independent contact output | – |
Model Expansion Rules
ST: Built-in M8 connector replacing cable
ز: Equipped with LED status indicator
-XM: Cable length in meter
-2237: Cable side actuation, alternative to 2187
- Troubleshooting Solutions
| ظاهرة الخلل | الأسباب المحتملة | Remedial Measures |
| No switching signal | 1. Mounting offset | 1. Readjust position within Sao range |
| 2. Damaged/lost actuator | 2. Replace BPS 33/BPS 33-2326 actuator | |
| 3. Loose or broken wiring | 3. Check and fasten wiring | |
| 4. انقطاع التيار الكهربائي | 4. Verify voltage within 100V AC/DC | |
| Intermittent signal | 1. Excessive vibration | 1. Install vibration damping parts |
| 2. Weakened magnetism | 2. Replace actuator | |
| 3. الاتصال الأكسدة | 3. Clean contacts under power-off state | |
| 4. Environmental interference | 4. Keep away from strong electromagnetic sources | |
| LED malfunction (G version) | 1. LED damage | 1. Replace sensor |
| 2. الأسلاك الخاطئة | 2. Check polarity and wiring | |
| 3. Safety circuit failure | 3. Inspect safety monitoring module | |
| Safety circuit reset failure | 1. Misaligned actuator | 1. Adjust actuator position |
| 2. Module malfunction | 2. Inspect and reset safety module | |
| 3. التصاق الاتصال | 3. Replace faulty sensor |
- Air Transport Compliance & شهادة
- الشهادات
cULus certified, compliant with North American safety standards
شهادة CE, compliant with EU Machinery Directive
Conforms to EN ISO 13849-1, EN IEC 60947-5-3
- الامتثال للشحن الجوي
No built-in lithium battery or super capacitor, classified as common industrial electronic equipment
Non-hazardous goods, meets IATA DGR Class 9 requirements
Standard industrial packaging to avoid damage
Recommended marking: FRAGILE, ELECTRONIC DEVICES
- بيئة التطبيق & Adaptation
السيناريوهات القابلة للتطبيق
Machine safety protection: Safety door monitoring for CNC machine, punching equipment and automatic production lines
Food processing industry: IP67 rated devices with high waterproof and dustproof requirements
ماكينات التعبئة والتغليف: Wear-free design extends service life for frequently opened safety doors
Logistics equipment: Vibration and impact resistant protection for AGV and conveyor belts
المعدات الطبية: Compatible with 100V AC/DC low voltage safety circuits
Unsuitable Scenarios
Strong magnetic field near large electromagnets and transformers
Ambient temperature exceeding +70°C
Switching frequency higher than 5Hz
High-risk areas requiring high coding security level (EX-BNS33 series recommended)
- Application Cases
قضية 1: Safety Door Monitoring for Auto Parts Production Line
طلب: Safety protective door of punching machine
Challenge: Frequent daily operation 500-800 مرات, oily environment, long service life demand
حل: BNS33-02ZG-2187 matched with BPS 33-2326 actuator and SRB-E-301ST safety module
Result: عملية مستقرة ل 3 سنين, IP67 protection resists oil contamination, LED facilitates maintenance
قضية 2: Safety Interlock for Food Packaging Machine
طلب: Sealing packaging machine safety protection
Challenge: Humid cleaning environment, stainless steel requirement, no metal contact
حل: BNS33-02Z-ST-2187 with M8 connector and stainless steel bracket
Result: IP67 waterproof performance qualified, non-contact structure prevents corrosion and improves equipment availability
- إرشادات الاختيار
Quick Rules
اتصال: 02=2NC, 11=1NO+1NC, 12=1NO+2NC
اتصال: No suffix=1m cable, ST=M8 connector
Indicator: G=LED equipped, Z=No LED
Actuation: 2187=lateral side, 2237=cable side
Specific Application Scenarios of BNS33-02Z-2187
- أدوات الآلة
Interlock safety doors of lathe, milling machine, punch press and bending machine to prevent accidental opening during operation
- Automatic Production Lines
Safety detection for assembly stations, handling positions and robot enclosure doors
- التعبئة والتغليف & Printing Machinery
Status monitoring for access doors and protective covers of laminator, carton sealer and printing machine
- طعام & Pharmaceutical Equipment
تعبئة, cleaning and sorting machinery adapting to humid and oily working conditions
- Plastic & Rubber Injection Molding Equipment
Safety locking control for opening doors of injection and extruder machines
- Logistics Conveying Equipment
Interlock protection for belt conveyor, roller line, AGV guardrail and maintenance doors
- Wind Power & Heavy Machinery
Position detection for small wind turbine hatch doors and engineering equipment access panels
- Automatic Warehouse System
Protection doors of stacker cranes and racks to prevent unauthorized personnel entry
Restricted Working Conditions
Strong electromagnetic field, temperature beyond -25~+70°C, switching frequency over 5 مرات في الثانية الواحدة
