شنايدر كونتاكتور LC1D09BDC

Schneider LC1D09BDC

Schneider LC1D09BDC is a 3-pole موصل التيار المتردد of the TeSys D series, with a rated current of 9A, a coil voltage of DC24V, 3NO main contacts and 1NO+1NC auxiliary contacts. It is suitable for AC-1/AC-3 loads, يدعم تركيب السكك الحديدية DIN, and is commonly used in industrial automation and motor control.

المعلمات الأساسية

تفسير رمز النموذج

LC1D: 3-pole contactor of TeSys D series

09: التصنيف الحالي 9A

ب: DC coil type

د: Coil voltage DC24V

ج: Mark for domestic version

Typical Applications and Replacement Selection

1. سيناريوهات التطبيق: Suitable for start-stop control of squirrel-cage motors with current ≤9A, as well as control of AC-3/AC-1 loads such as heating equipment, fans and water pumps. It is compatible with DC control circuits of PLC and DCS systems.
2. Replacement Selection

Intra-series replacement: LC1D09BD (imported version with identical parameters)

Cross-brand replacement: ABB A16-30-01 (تيار مستمر 24 فولت), Siemens 3RT2015-1BB41 (تيار مستمر 24 فولت), Chint NXC-0910ز (تيار مستمر 24 فولت)

Installation and Safety Points

1. مواصفات التثبيت

درجة الحرارة المحيطة: -5درجه مئوية ~ +40 درجه مئوية, Altitude ≤2000m, Avoid dust/corrosion/condensation

Reserve heat dissipation clearance, spacing between adjacent devices ≥5mm

عزم الدوران الأسلاك: Main circuit 1.7N·m, Control circuit 0.5N·m

2. Safety Tips

Verify voltage after coil power-off to prevent residual voltage

It is recommended to match a thermal overload relay (على سبيل المثال, LRD06C) for motor circuits

Derating is required for frequent start-stop scenarios (recommended ≤80% of rated current)

استكشاف الأخطاء وإصلاحها الشائعة

Procurement and Maintenance

رقم الطلب: LC1D09BDC, التعبئة والتغليف: 1 pc/box, 21 pcs/carton

Warranty Period: 18 شهور, It is recommended to inspect contact wear and wiring tightness quarterly

The following are the mainstream cross-brand direct replacement models for Schneider LC1D09BDC (3-القطب, 9أ, تيار مستمر 24 فولت, 3NO main contacts, 1NO+1NC auxiliary contacts), classified by brand with core parameter matching marked for quick selection and replacement.

1. Key Points for Core Parameter Matching

Ensure the following key parameters are consistent during replacement:

Pole number: 3-القطب

التصنيف الحالي: 9أ (at AC-3 400V)

الجهد لفائف: تيار مستمر 24 فولت (العاصمة)

جهات الاتصال الرئيسية: 3لا (3 مفتوحة عادة)

اتصالات مساعدة: 1لا + 1NC (1 مفتوحة عادة + 1 مغلقة عادة)

Service category: AC-1/AC-3 (suitable for resistive loads and squirrel-cage motors)

1. Cross-brand Replacement Model Comparison Table

ثالثا. Notes on Replacement Selection

1. توافق التثبيت: All recommended models are suitable for 35mm DIN rail mounting, with dimensions close to LC1D09BDC (تقريبا. 45ملم في العرض), enabling direct replacement of installation positions.
2. Wiring Matching: Main circuit wiring torque 1.7N·m, control circuit 0.5N·m, consistent with the original contactor.
3. Thermal Relay Matching: It is recommended to match a thermal overload relay below 9A of the same brand (على سبيل المثال, ABB TA25DU06, Siemens 3RB2016, Chint NR2-063) to ensure consistent motor protection.
4. الحماية من الطفرة: It is recommended to install a freewheeling diode or surge suppressor for DC coils to extend service life.
5. Derating Use: For frequent start-stop scenarios (>1200 مرات / ساعة), derate to below 7.2A for use.
6. اقتراحات الاختيار السريع
7. Pursue original quality: Select Schneider LC1D09BD
8. Prioritize cost performance: Select Chint NXC-09M/22/Z or Delixi CJX2s-0911ز
9. System compatibility: Select AX09-30-11-80 for ABB systems, 3RT2023-1BB41 for Siemens systems
10. Spare part universality: Prioritize mainstream domestic models such as NXC/CJX2s for easier procurement and maintenance