المقاولين,قاطع الدائرة,العاكس للطاقة الشمسية,عداد كهرباء,البطاريات الشمسية
ET200SP Digital Input Module
6ES7131-6BH01-0BA0 is a 16-channel 24V DC standard digital input module for the SIEMENS SIMATIC ET200SP distributed I/O system. As a basic digital input module in the SIMATIC ET200SP series, it is used to acquire digital signals from industrial sites (such as switches, sensor statuses, إلخ.) and transmit them to the PLC control system.
| المعلمة | تفاصيل |
| نموذج | 6ES7131-6BH01-0BA0 |
| اسم المنتج | SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard |
| نوع الإدخال | Sink input, بنب, P-reading, متوافق مع IEC 61131-2 يكتب 3 |
| Suitable Base Unit | BU-type A0, Color Code CC00 |
| Packaging Unit | 1 piece |
| نموذج الاستبدال | Replaces the older version 6ES7131-6BH00-0BA0 |
المواصفات الفنية
الخصائص الكهربائية
| مميزة | قيمة |
| Number of Input Channels | 16 independent channels, divided into 2 المجموعات (8 القنوات لكل مجموعة) |
| تصنيف جهد الإدخال | 24في العاصمة (19.2V ~ 30V DC) |
| المدخلات الحالية | Typical 4mA per channel, الأعلى. 5أماه |
| Switching Threshold | High level (على): ≥15V DC, Low level (عن): ≤5V DC |
| Input Delay Time | Adjustable from 0.05ms to 20ms (via parameter configuration) |
| Isolation | Galvanic isolation between channel groups, and between channels and backplane bus |
| الحماية من الطفرة | Overvoltage and surge protection |
| حماية ماس كهربائى | Short-circuit protection per channel |
ميكانيكية & الخصائص البيئية
| مميزة | قيمة |
| أبعاد (الارتفاع × العرض × العمق) | تقريبا. 73mm × 15mm × 58mm |
| وزن | تقريبا. 0.07كجم |
| تصاعد | تركيب السكك الحديدية DIN, suitable for SIMATIC ET200SP base units |
| فئة الحماية | IP20 (في 60529) |
| درجة حرارة التشغيل | أفقي: -30درجة مئوية ~ +60 درجة مئوية; رَأسِيّ: 0درجة مئوية ~ +50 درجة مئوية |
| درجة حرارة التخزين | -40درجة مئوية ~ +85 درجة مئوية |
| الرطوبة النسبية | 5% ~ 95% (غير التكثيف) |
| Vibration/Shock Resistance | متوافق مع IEC 60068-2-6 واللجنة الانتخابية المستقلة 60068-2-27 |
| إي إم سي | متوافق مع EN 61000-6-2 (immunity) and EN 61000-6-4 (emission) for industrial environments |
- Flexible Input Delay Setting: Supports adjustable input delay from 0.05ms to 20ms to suit applications with different response speed requirements.
- Comprehensive Diagnostics:
Channel-level diagnostics (wire break, short-circuit detection)
Module-level diagnostics (power fault, internal error)
إشارة الحالة: green LED per channel (ON/OFF status), plus red/green status LEDs on top of the module
- Hot-Swappable: Supports module replacement during system operation (with ET200SP base unit), reducing downtime.
- Channel Grouping: 16 channels divided into 2 groups of 8, with independent parameter configuration.
- استجابة سريعة: Minimum input delay of only 0.05ms, suitable for high-speed signal acquisition.
- موثوقية عالية: Industrial-grade design with overvoltage, short-circuit protection and anti-interference capability for harsh industrial environments.
تثبيت & الأسلاك
- خطوات التثبيت:
Snap the module onto the SIMATIC ET200SP base unit (BU-type A0).
Ensure the module is fully engaged and has good contact with the base unit.
Connect power and signal cables.
- طريقة الأسلاك:
مزود الطاقة: System power (24في العاصمة) provided via the base unit.
Signal connection: Each terminal connects to an external digital signal source (على سبيل المثال, التبديل الحد, جهاز استشعار كهروضوئي).
محطة مشتركة: Each group (8 القنوات) shares one common terminal (كوم).
التطبيقات
This module is widely used in various industrial automation fields, mainly for:
- Manufacturing Automation:
Assembly lines: Acquisition of station in-position, fixture closed, safety door status signals.
Conveying systems: Detection of material position, jam switches or sorting trigger signals.
ماكينات التعبئة والتغليف: Monitoring of sealing completion, product presence, counting pulses and other logic inputs.
- التحكم في العمليات:
Water treatment equipment: Reading of level switches, pump running status, valve limit signals.
Power switch cabinets: Status monitoring (circuit breaker position, cabinet door status, إلخ.).
أنظمة التدفئة والتهوية وتكييف الهواء: Monitoring fan/pump start/stop status and valve position feedback.
- Other Applications:
Intelligent warehousing: Acquisition of shelf positioning, stacker travel switch and other digital feedback.
أتمتة البناء: Security systems, access control status monitoring.
طاقة & infrastructure: Status monitoring and logic control.
التشخيص & صيانة
- LED Status Indication:
Green LED per channel: ON = input active, OFF = input inactive.
Top module LEDs: Green = normal operation, Red = fault or error.
- وظائف التشخيص:
Channel-level: انقطاع الأسلاك, ماس كهربائى, overvoltage detection.
Module-level: خطأ في الطاقة, internal error, communication fault.
Diagnostic data can be read via PLC programming for fast troubleshooting.
- توصيات الصيانة:
Regularly check for loose connections.
Keep the module clean to avoid dust buildup affecting heat dissipation.
Hot-swappable for replacement without shutdown (system configuration dependent).
الطلب & معلومات الاستبدال
Original Order No.: 6ES7131-6BH01-0BA0
الملحقات الموصى بها:
Base unit: BU-type A0 (على سبيل المثال, 6ES7193-6BP00-0DA0)
Terminal modules: Selected based on wiring requirements
ملاحظة الاستبدال: This model replaces the older 6ES7131-6BH00-0BA0, with full functional compatibility and improved performance.
6ES7131-6BH01-0BA0 = ET200SP 16-channel 24V DC digital input module, mainly used to acquire various on-site switching signals. It has a very wide range of applications, focusing on automated production lines, equipment control, اللوجستية & التخزين, process control and other fields.
- Manufacturing Production Lines
أدوات الآلة & مراكز التصنيع: travel switches, limit switches, home sensors, E-stop buttons, safety door signals
Assembly lines: workpiece in-position, fixture clamp/unclamp, cylinder stroke in-position, pallet positioning signals
لحام / coating lines: spray gun position, protective door status, conveyor chain start/stop, counting sensors
- التعبئة والتغليف & Food Machinery
ماكينات التعبئة والتغليف: box sealing in-position, film roll detection, pusher in-position, counting pulses
Food production lines: material presence on conveyors, bottle/can in-position, safety interlock switch signals
ثالثا. اللوجستية & Warehousing Automation
AS/RS & AGVs: stacker limits, fork in-position, shelf occupancy detection
فرز الخطوط: scan trigger, sorting in-position, blocker status, belt running signals
- معالجة المياه, التدفئة والتهوية وتكييف الهواء & Utilities
Pump / fan control cabinets: run feedback, fault alarms, manual/automatic switch, level switches
Valve control: pneumatic/electric valve open/closed in-position signals
Wastewater treatment: grille, sedimentation tank level switches, pump running status
- قوة, Distribution & Buildings
LV/HV switchgear: circuit breaker position, energy storage complete, switching status, cabinet door switches
أتمتة البناء: fan status, fire damper position, security access, fire alarm inputs
- Engineering Machinery & Custom Equipment
Hydraulic / pneumatic systems: pressure switches, solenoid valve feedback, cylinder stroke limits
Test benches & test equipment: sensor triggers, start/stop buttons, safety interlocks
سابعا. Typical Connected Signal Types
Pushbuttons, knobs, selector switches
Proximity sensors, photoelectric sensors, fiber optic sensors
Limit switches, travel switches, cam switches
Safety door locks, emergency stops, safety light curtain signals
Dry contact signals for equipment run/fault status
Any 24V switching signal on-site that needs to be connected to a PLC for logic judgment can basically be acquired by this module.
Complete Model List of SIEMENS SIMATIC ET200SP Digital Input Modules
Below is a categorized list of all mainstream ET200SP digital input modules, with order numbers, key parameters and applications for quick selection and procurement.
- Module Type Description
| Type Code | الاسم الكامل | الميزات الرئيسية | التطبيقات |
| بكالوريوس | أساسي | Core functions, simple design, الأمثل من حيث التكلفة | Simple signal acquisition, no special diagnostic requirements |
| شارع | معيار | Full standard functions, module-level diagnostics | Most industrial automation applications |
| التردد العالي | High Feature | Channel-level diagnostics, flexible parameter settings | High reliability requirements, precise fault location |
| HS | High Speed | Microsecond response, supports oversampling | High-speed signal acquisition, fast counting applications |
| F-DI | Fail-Safe | سيل 2/3 معتمد, وظائف السلامة | Safety-related control systems |
| NAMUR | Intrinsically Safe | NAMUR-compliant, for hazardous areas | Process industry, with intrinsically safe sensors |
| تكييف | AC Input | For AC 120V/230V signals | AC signal sources, على سبيل المثال, traditional relay contacts |
- DC 24V Digital Input Modules (Mainstream Applications)
- النوع الأساسي (بكالوريوس)
| رقم الطلب. | Module Name | القنوات | نوع الإدخال | الميزات الرئيسية | Suitable Base |
| 6ES7131-6BF01-0AA0 | DI 8x 24V DC BA | 8 | Sink (بنب) | Basic input, no diagnostics | BU-type A0 (CC00) |
| 6ES7131-6BH01-0AA0 | DI 16x 24V DC BA | 16 | Sink (بنب) | Basic input, no diagnostics | BU-type A0 (CC00) |
| 6ES7131-6BF61-0AA0 | DI 8x 24V DC SRC BA | 8 | Source (نبن) | Basic input, source type | BU-type A0 (CC00) |
| 6ES7131-6BH60-0AA0 | DI 16x 24V DC SRC BA | 16 | Source (نبن) | Basic input, source type | BU-type A0 (CC00) |
- النوع القياسي (شارع)
| رقم الطلب. | Module Name | القنوات | نوع الإدخال | الميزات الرئيسية | Suitable Base |
| 6ES7131-6BF01-0BA0 | DI 8x 24V DC ST | 8 | Sink (بنب) | Module diagnostics (wire break/short), 0.05–20ms delay | BU-type A0 (CC01) |
| 6ES7131-6BH01-0BA0 | DI 16x 24V DC ST | 16 | Sink (بنب) | 2 المجموعات (8 ch/group), module diagnostics | BU-type A0 (CC00) |
| 6ES7131-6BF01-2BA0 | DI 8x 24V DC ST (pack of 10) | 8 | Sink (بنب) | Bulk pack, otherwise standard | BU-type A0 (CC01) |
| 6ES7131-6BH01-2BA0 | DI 16x 24V DC ST (pack of 10) | 16 | Sink (بنب) | Bulk pack, otherwise standard | BU-type A0 (CC00) |
| 6ES7131-6BF61-0BA0 | DI 8x 24V DC SRC ST | 8 | Source (نبن) | Source input, module diagnostics | BU-type A0 (CC01) |
- High Feature Type (التردد العالي)
| رقم الطلب. | Module Name | القنوات | نوع الإدخال | الميزات الرئيسية | Suitable Base |
| 6ES7131-6BF00-0CA0 | DI 8x 24V DC HF | 8 | Sink (بنب) | Channel diagnostics, 0.05–20ms delay | BU-type A0 (CC01) |
| 6ES7131-6BH00-0CA0 | DI 16x 24V DC HF | 16 | Sink (بنب) | 2 المجموعات, channel diagnostics, حماية ماس كهربائى | BU-type A0 (CC00) |
| 6ES7131-6BF60-0CA0 | DI 8x 24V DC SRC HF | 8 | Source (نبن) | Channel diagnostics, source input | BU-type A0 (CC01) |
| 6ES7131-6BH60-0CA0 | DI 16x 24V DC SRC HF | 16 | Source (نبن) | 2 المجموعات, channel diagnostics, source input | BU-type A0 (CC00) |
| 6ES7131-6CF00-0CA0 | DI 8x 24V DC HF (PNP/NPN switchable) | 8 | Switchable | Software-configurable input type, channel diagnostics | BU-type A0 (CC01) |
- High Speed Type (HS)
| رقم الطلب. | Module Name | القنوات | نوع الإدخال | الميزات الرئيسية | Suitable Base |
| 6ES7131-6BH01-0HA0 | DI 8x 24V DC HS | 8 | Sink (بنب) | دقيقة. delay 0.05ms, supports oversampling | BU-type A0 (CC01) |
| 6ES7131-6BH01-0JA0 | DI 16x 24V DC HS | 16 | Sink (بنب) | دقيقة. delay 0.1ms, 2 المجموعات, oversampling | BU-type A0 (CC00) |
ثالثا. Special Digital Input Modules
- Fail-Safe Type (F-DI)
| رقم الطلب. | Module Name | القنوات | مستوى السلامة | الميزات الرئيسية | Suitable Base |
| 6ES7136-6BA01-0CA0 | F-DI 8x 24V DC HF | 8 | سيل 2/3 | Dual-channel redundancy, fail-safe diagnostics | BU-type A0 (CC01) |
| 6ES7136-6CA01-0CA0 | F-DI 16x 24V DC HF | 16 | سيل 2/3 | Grouped redundancy, safe communication | BU-type A0 (CC00) |
| 6DL1136-6BA00-0PH1 | F-DI 16x 24V DC HA | 16 | سيل 2/3 | High availability, for ET200SP HA | HA-specific base |
- NAMUR Type (Intrinsically Safe)
| رقم الطلب. | Module Name | القنوات | معيار | الميزات الرئيسية | التطبيقات |
| 6ES7131-6TF00-0CA0 | DI 8x NAMUR HF | 8 | اللجنة الانتخابية المستقلة 60947-5-6 | Channel diagnostics, intrinsically safe | Hazardous areas with NAMUR sensors |
| 6ES7131-6TF00-0DA0 | DI 8x NAMUR ST | 8 | اللجنة الانتخابية المستقلة 60947-5-6 | Module diagnostics, intrinsically safe | Hazardous areas, standard diagnostics |
- AC Input Type
| رقم الطلب. | Module Name | القنوات | الجهد المقنن | الميزات الرئيسية | التطبيقات |
| 6ES7131-6FD00-0BB1 | DI 4x 120/230V AC ST | 4 | 120–230V AC | Module diagnostics, حماية الجهد الزائد | AC signal sources, traditional electrical systems |
| 6ES7131-6FD00-0CA1 | DI 8x 120/230V AC HF | 8 | 120–230V AC | Channel diagnostics, نطاق الجهد واسعة | AC sensors, industrial power monitoring |
- Other Special Modules
| رقم الطلب. | Module Name | وظيفة خاصة | التطبيقات |
| 6ES7131-6BF01-0DA0 | DI 8x 24V DC ST (Redundant) | Power redundancy, dual supply | High-availability systems, critical equipment monitoring |
| 6ES7131-6BH01-0DA0 | DI 16x 24V DC ST (Redundant) | 2 independent power groups, redundant design | التحكم في العملية, non-stop operation systems |
- Key Supplementary Information
- Base Unit Matching Rules
Most DI modules use BU-type A0 base units, Color Code CC00/CC01.
Fail-safe modules require safety-certified base units.
HA high-availability modules require dedicated HA base units.
- Input Type Explanation
| نوع الإدخال | وضع العلامات | طريقة الأسلاك | تطبيق نموذجي |
| Sink | Sink (بنب) | Common to negative, signal to positive | SIEMENS standard, most sensors |
| Source | Source (نبن) | Common to positive, signal to negative | Japanese equipment, specific sensors |
| Switchable | بنب/نبن | Software-configurable input type | Flexible adaptation to different signal sources |
- Replacement Model Reference
| النموذج القديم | نموذج جديد | ملاحظة الاستبدال |
| 6ES7131-6BF00-0BA0 | 6ES7131-6BF01-0BA0 | Upgraded functions, enhanced diagnostics |
| 6ES7131-6BH00-0BA0 | 6ES7131-6BH01-0BA0 | Performance optimized, improved compatibility |
| 6ES7131-6BF00-0AA0 | 6ES7131-6BF01-0AA0 | Basic version update |
- Bulk Packaging Models
Some popular models are available in packs of 10, with order numbers ending in 2BA0 (على سبيل المثال, 6ES7131-6BF01-2BA0), suitable for large-scale projects to reduce unit cost.
- توصيات الاختيار
- Basic Applications: Prefer BA/ST types for balanced cost and functionality.
- Fault Diagnostics: Choose HF types for channel-level fault location and reduced downtime.
- High-Speed Signals: Must use HS types for microsecond-level response.
- Safety Systems: Mandatory use of F-DI types to meet SIL safety ratings.
- المناطق الخطرة: Select NAMUR types with intrinsically safe sensors.
