Schütz,Leistungsschalter,Solarwechselrichter,Stromzähler,Solarbatterien
| Modellteil | Bedeutung | Ausführliche Erklärung |
| VFD | Delta Inverter Identifier | Abbreviation for Variable Frequency Drive, the universal prefix for Delta’s industrial automation inverters. |
| 55 | Anwendbare Motorleistung | For 5.5kW (7.5HP) Motoren; this is the rated output power of the drive. |
| C | Seriencode | C2000/C2000+ Series – Delta high-performance general-purpose vector inverter, supporting induction motors and permanent magnet synchronous motors. |
| 43 | Spannungsklasse & Phase | 4 = 3-phase 400V class (380~480V); 3 = 3-phase input (vs. 1 für einphasig). |
| A | Steuermodus & Merkmale | Supports Vector Control (FOC), Drehmomentkontrolle (TRQ), high-performance algorithm, 200% starting torque at 0.5Hz. |
| -21 | Version & Konfiguration | Standardversion: built-in braking unit (selected power ratings), no built-in EMC filter (external available), compliant with international standards. |
- Grundlegende technische Spezifikationen (Official 2026 Data)
| Kategorie | Artikel | Wert | Notizen |
| Grundlegende Spezifikationen | Nennleistung | 5.5kW (7.5HP) | For 5.5kW 3-phase induction motors |
| Eingangsspannung | 3-Phase 380~480V (+10%/-20%) | 47~63Hz, großer Spannungsbereich | |
| Nennausgangsstrom | 12A (Schwerlastbetrieb) / 10.8A (light duty) | Continuous operation in heavy-duty mode | |
| Output Frequency Range | 0.1~600Hz | For both low‑ and high‑speed applications | |
| Kontrollieren Sie die Leistung | Steuermodus | Sensorless Vector, Closed-loop Vector, V/F-Steuerung | Switchable closed/open loop |
| Anlaufdrehmoment | 200% Nenndrehmoment bei 0,5 Hz | Ideal for heavy starting loads | |
| Überlastfähigkeit | 150% for 60s; 200% for 3s | For shock loads | |
| Speed Accuracy | ±0,5 % (open-loop) / ±0.02% (closed-loop) | High precision speed control | |
| Torque Response Time | ≤10ms | Schnelle dynamische Reaktion | |
| Hardware | Schutzgrad | IP20 (cabinet mount) | Fingersicher; clean environment recommended |
| Kühlung | Forced air (removable fan) | Einfache Wartung, lange lebensdauer | |
| Integrierte Funktionen | Bremseinheit (≤7.5kW), SPS (5,000 Schritte) | High integration, fewer external parts | |
| Kommunikation | RS-485 (Modbus RTU) Standard | PROFINET/EtherNet/IP/CANopen optional | |
| Umfeld | Betriebstemp | -10~40°C (derate 40~50°C) | Derate 1% per °C above 40°C |
| Lagertemp | -20~60°C | Feuchtigkeit vermeiden & ätzendes Gas | |
| Luftfeuchtigkeit | 5~95 % (nicht kondensierend) | Suitable for industrial environments |
III. Kernfunktionen & Vorteile
3.1 High‑Performance Control
Vektorsteuerung: Precise independent torque & speed control for complex loads.
Integrierte SPS: 5,000-step logic programming for simple automation, reducing external PLC dependency.
Auto energy saving: Dynamically adjusts output voltage; saves 20~50% at light load.
Motor auto-tuning: Completes matching in <10S, simplifies commissioning.
3.2 Hochzuverlässiges Design
Modularer Aufbau: Hot-swappable keypad, expandable I/O and communication cards for easy maintenance.
Voller Schutz: Überstrom, Überspannung, Unterspannung, überhitzen, Überlast, Phasenverlust, Erdschluss, usw.
Safe stop: Supports STO (Sicher abgeschaltetes Drehmoment), SIL 2 zertifiziert.
Wide grid tolerance: Withstands ±15% voltage fluctuation for harsh grids.
3.3 Flexible Kommunikation & Erweiterung
Standard RS-485 Modbus RTU for multi-drive network control.
Optional modules: PROFINET, EtherNet/IP, PROFIBUS DP, CANopen.
Compatible with Siemens, Mitsubishi, Rockwell PLCs via standard telegrams and process objects.
Fernüberwachung & diagnostics via Delta DIAStudio or TIA Portal.
- Anwendungen & Auswahltipps
4.1 Empfohlene Anwendungen
| Industrie | Typische Anwendungen | Merkmale |
| Allgemeine Maschinen | Pumps, Fans, Kompressoren, Mischer | Energieeinsparung, stabiler Betrieb, longer equipment life |
| Materialhandhabung | Förderer, Kräne, Hebezeuge, Verpackungsmaschinen | High precision speed control, heavy start, quick stop |
| Metal Processing | Lathes, milling, grinding, punching machines | High response, präzise positionierung, Drehmomentregelung |
| Textile & Dyeing | Textile machines, dyeing machines, stenter frames | Constant tension, Synchronbetrieb, wide speed range |
| Plastik & Rubber | Injection molding, extrusion, blow molding | Significant energy saving (20~60 %), stable pressure control |
4.2 Wichtige Auswahlpunkte
- Power matching: Use VFD055C43A-21 for 5.5kW motors; avoid undersizing.
- Ladetyp:
Constant torque (Förderer, Mischer): use heavy-duty mode (12A).
Variable torque (Fans, Pumps): light-duty mode (10.8A) for better efficiency.
- Control requirements:
Hochpräzise Positionierung: use encoder (PG card) Vektor mit geschlossenem Regelkreis.
Network control: add communication module (z.B., PROFINET).
- Umfeld:
Hohe Temperatur: extra cooling or derating required.
Dusty environment: dust cover + regular fan cleaning.
- Ersatzmodelle & Upgrade-Pfad
5.3 Upgrade-Vorschläge
- Basic upgrade: VFD‑M/GD10 → C2000+ for better precision & Funktionen.
- Communication upgrade: Add PROFINET card for Industry 4.0 connectivity.
- System upgrade: Combine with Delta PLC (DVP series) & HMI for full automation solution.
Buying Notes
- Confirm suffix -21 (Standardversion), avoid old versions (z.B., -00).
- Verify power & aktuell: 5.5kW → 12A rated.
- Buy from authorized Delta channels for genuine product & Service.
- Order accessories as needed: communication card, Tastenfeld, braking resistor.
VII. Installation & Wartung
7.1 Installationsregeln
- Montage: Wall/cabinet mount, vertical installation; ≥150mm clearance top & bottom for ventilation.
- Verdrahtung:
Separate power & control cables to avoid interference.
Shielded cable for signals, einseitige Erdung.
Braking resistor matched to power (≤7.5kW internal; external ≈100Ω/500W).
- Erdung: Ground resistance ≤4Ω for safety & noise immunity.
Delta VFD055C43A-21 is a high‑performance 5.5kW vector inverter from the C2000+ series, featuring high precision, Zuverlässigkeit, and expandability for diverse industrial applications. With built-in PLC, wide voltage tolerance, and complete protection, it is an excellent choice for general industrial drive solutions. Select based on motor power, load type, Kontrollanforderungen, and environment for optimal performance and cost-effectiveness.
Complete Replacement Guide for Delta VFD055C43A-21
- Delta Internal Replacements (C2000+-Serie, Seamless Compatibility)
1.1 Direct Same‑Series Replacements
| Fehlercode | Ursache | Lösung |
| OC | Überstrom | Check motor short, Überlast, acceleration time |
| OV | Überspannung | Check mains voltage, deceleration time, braking resistor |
| UV | Unterspannung | Check input phase, Stromspannung, cable size |
| OH | Überhitzen | Check fan, Belüftung, Umgebungstemperatur |
| PH | Phasenverlust | Check input/output wiring, motor winding |
1.2 Near‑Power Replacements
| Modell | Leistung | Nennstrom | Hauptmerkmale | Anwendung |
| VFD055C43A-21 (Original) | 5.5kW | 12A / 10.8A | C2000+, vector, built-in brake, RS-485 | Allgemeine Industrie |
| VFD055C43A-21 (Aktualisiert) | 5.5kW | 12A | Better cooling, 10,000-step PLC, more protocols | Neue Projekte |
| VFD055CH43A-21 | 5.5kW | 12A | CH2000, fan/pump specialized | Fans, Pumps |
| VFD055CP43B-21 | 5.5kW | 12A | CP2000, hoist/crane dedicated | Kräne, Hebezeuge |
- Global Brand Replacements (5.5kW / 400V Vector)
2.1 Premium Brands
| Marke | Modell | Serie | Kontrolle | Vorteil |
| Siemens | 6SL3210-1KE21-3UF1 (G120C PN) | SINAMICS G120C | Vector/V/F | PROFINET, EMC filter |
| Mitsubishi | FR-A840-00720-2-60 | FREQROL A840 | Vektor | High response, integrierte SPS |
| Yaskawa | CIMR-AB4A0018FBA | A1000 | Vektor | Geräuscharm, stabil |
| Schneider | ATV320U75N4 | Altivar 320 | Vector/V/F | Kompakt, multi-protocol |
| ABB | ACS550-01-012A-4 | ACS550 | DTC | High torque accuracy |
2.2 Cost‑Effective Brands
| Marke | Modell | Serie | Kontrolle | Vorteil |
| Innovation | MD280NT5.5GB | MD280 | Vektor | PROFINET supported |
| Veichi | AC70-T3-055G | AC70 | Vektor | Full-featured, niedrige Kosten |
| INVT | CHF100A-5R5G/7R5P-4 | CHF100A | Vektor | Built-in brake un |
III. Critical Replacement Rules (Must Follow)
- Leistung & aktuell: Rated power ≥5.5kW, current ≥12A (Schwerlastbetrieb).
- Stromspannung: 400V-Klasse (380~480V) only; do NOT use 200V directly.
- Kontrolle: Prefer vector control for matching dynamics.
- Überlast: At least 150% for 60s.
- Kommunikation: RS-485 standard; PROFINET/EtherNet/IP optional.
Mechanical Compatibility
Abmessungen: ~90×180×150mm – use same or smaller size.
Kühlung: Forced air – keep airflow direction.
Brake unit: Internal for ≤7.5kW; match external if needed.
Tastenfeld: Use Delta standard keypad or compatible.
Best Replacement by Application
Allgemeine Maschinen: VFD055C43A-21 upgraded or Siemens G120C PN.
Fans & Pumps: VFD055CH43A-21 or Schneider ATV320U75N4.
Cranes/hoists: VFD055CP43B-21 or Mitsubishi FR-A840.
Budgetprojekte: Inovance MD280NT5.5GB or Veichi AC70-T3-055G.
- Upgrade Paths
4.1 Delta Internal Upgrade
- C2000 → C2000+ (Leistung & function improvement).
- Add PROFINET module (VFD-CM-PN01) for industrial networking.
- Pair with Delta PLC + HMI for full automation system.
4.2 Cross‑Brand Upgrade
- Kommunikation: RS-485 → PROFINET / EtherNet/IP.
- Kontrolle: Open-loop vector → closed-loop vector with encoder.
- Sicherheit: Choose models with STO (SIL 2).
The Delta VFD055C43A-21 has a wide range of replacements.
Same‑brand (C2000+ upgraded) offers seamless compatibility.
Cross‑brand (Siemens G120C PN, Mitsubishi FR-A840) provides higher performance.
Always follow core parameter matching to ensure stable, reliable replacement without performance loss or equipment damage.
