Schneider RXZE2M114M 14-pin Relay Socket

Schneider RXZE2M114M is a 14-pin mixed-type relay socket, specially designed for RXM2/RXM4 series miniature intermediate relays. It features 10A rated current, IP20 protection degree and wide operating temperature range, suitable for various industrial control applications. Its mixed terminal layout ensures flexible wiring, and dual mounting modes fit different control cabinet designs. Approved with CE, UL, CSA and other international certifications, it can be shipped as ordinary goods by air without special formalities.

Model Code Definition

Codesegment	Bedeutung	Beschreibung
RXZ	Produktserie	Zelio Relay series relay sockets
E2	Seriencode	2nd-generation standard socket, compatible with 2-pole & 4-pole RXM relays
M	Terminal Arrangement	Mixed layout, coil and contact terminals arranged alternately
114	Kontaktkonfiguration	14 pins, fits relays with 4 change-over contacts (4CO/4PDT) oder 2 change-over contacts (2CO/2PDT)
M	Regional Standard	Compliant with RIS standard; differs from RXZE2M114 (SCR standard) in partial certification details

Vollständiger Produktname: Schneider Harmony Zelio RXZE2M114M Mixed-type 14-pin Relay Socket, compatible with RXM2/RXM4 relays, screw terminal connection, DIN-Schienenmontage

Grundlegende technische Spezifikationen

Kategorie	Spezifikationen	Bemerkungen
Grundparameter
Produkttyp	Mixed-type relay socket	Mixed layout of coil and contact terminals
Compatible Relays	RXM2 (2CO, 8-Stift), RXM4 (4CO, 14-Stift), REXL series	Compatible with standard Schneider Zelio relays
Pin Shape	Flat type	Ensures stable plug-in connection
Verkabelungstyp	M3 screw terminals	Tightening torque ≤1 N·m
Elektrische Parameter
Nennbetriebsspannung (Ue)	≤250V AC/DC	Applicable to most industrial control circuits
Conventional Free-air Thermal Current (Ith)	10A	Continuous rated working current
Spannungsfestigkeit	2500V	Konform mit IEC 61984
Schutzgrad	IP20	Finger-proof and dust-proof
Mechanical Parameters
Montagemethode	35mm standard DIN rail clip-on / panel screw mounting	Dual installation options
Breite	27mm	Kompakte Größe, platzsparend
Nettogewicht	0.056kg	Lightweight design
Applicable Wires	Solid wire: 0.5~2.5mm² (AWG20~14)	Covers various wiring requirements
	Stranded wire with ferrule: 0.25~2.5mm² (AWG22~14)
	Twin solid wire: 0.5~1.5mm² (AWG20~16)
	Twin stranded wire with ferrule: 0.25~1mm² (AWG22~17)
Umgebungsparameter
Betriebstemperatur	-40°C ~ +55°C	Wide temperature range for harsh industrial environments
Lagertemperatur	-40°C ~ +85°C	Suitable for transportation and storage
Zertifizierungen	CE, UL, CSA, Lloyd’s	Meets major international safety standards
Ordering Info
Teilenummer	RXZE2M114M	Unique product model
Minimum Order Qty	10 Stk	Standard packing quantity
Alternatives Modell	RXZE2M114 (SCR standard)	Same function, different certification standards

Häufige Fehler & Maintenance Solutions

3.1 Fehlerbehebung

Fehlerphänomen	Mögliche Ursachen	Lösungen
Relay cannot be inserted/removed	1. Deformed socket pins	1. Straighten pins gently with tweezers
	2. Oxidized/dirty relay pins	2. Clean pins with anhydrous alcohol
	3. Distorted socket caused by over-tight installation	3. Adjust installation tightness and reinstall
Schlechter Kontakt / signal interruption	1. Loose wiring terminals	1. Retighten terminals within 1 N*m torque
	2. Oxidized/burned contacts	2. Polish contacts gently with metallographic sandpaper
	3. Deformed internal terminals	3. Inspect and replace defective socket
Abnormal overheating	1. Overload operation over 10A	1. Replace higher-capacity socket or split load
	2. Large contact resistance at terminals	2. Re-crimp wires for better contact
	3. Zu hohe Umgebungstemperatur	3. Improve ventilation and lower temperature
Reduced insulation performance	1. Dust and oil accumulation	1. Clean socket surface regularly
	2. Insulation aging under long-term high temperature	2. Replace aged sockets timely
	3. Chemical corrosion	3. Use anti-corrosion sockets or protective covers

3.2 Daily Maintenance Recommendations

Regelmäßige Inspektion: Check terminal tightness every 3 Monate
Reinigung: Remove dust with compressed air every 6 Monate, wipe surface with anhydrous alcohol if needed
Preventive Replacement: Replace sockets every 2-3 years in high-temperature, high-humidity or corrosive environments
Installationsregeln: Avoid mechanical shock and vibration; ensure full fitting between socket and relay; keep ≥5mm gap between adjacent sockets for heat dissipation
Auswahltipp: Reserve 20% current margin according to resistive/inductive loads to avoid overload
Full RXZE2 Series Model List

Modell	Terminallayout	Pin Count	Compatible Relay	Merkmale	Anwendung
RXZE2M114M	Mixed	14	RXM2(2CO), RXM4(4CO)	RIS standard, Schraubklemmen	Allgemeine Industriekontrolle, flexible Verkabelung
RXZE2M114	Mixed	14	RXM2(2CO), RXM4(4CO)	SCR standard, Schraubklemmen	Same function, different certifications
RXZE2S114M	Separated	14	RXM4(4CO)	Separated coil & contact terminals	Logic control circuit, Anti-Interferenz
RXZE2S111M	Separated	11	RXM3(3CO)	For 3-pole relays	Special control such as star-delta starting
RXZE2S108M	Separated	8	RXM2(2CO)	For 2-pole relays	Compact control circuits
RXZE2M108M	Mixed	8	RXM2(2CO)	Mixed 8-pin design	Compact control boxes

Markenübergreifender Vergleich

Marke	Modell	Montage	Preis(USD)	Kompatibilität
Schneider	RXZE2M114M	DIN Rail/Panel	6.23	RXM2/RXM4 series
Omron	PYFZ-014	DIN-Schiene	5.8	Partial fit for RXM, fits MY4
Siemens	3RH2911-1FA22	DIN-Schiene	7.5	Limited compatibility with 3RT series
ABB	CR-M14S	DIN-Schiene	6.9	Partial fit for CR-M series
IDEC	SH4B-05B	DIN-Schiene	6.1	Good mechanical compatibility with RH4B
Phönix	PLC-RSC-24DC/21-21	DIN-Schiene	8.2	Low cross-brand compatibility

Replacement Suggestion

Full compatibility: Adopt original Schneider RXZE2M114 / RXZE2M114M
Cost-effective alternative: Omron PYFZ-014, IDEC SH4B-05B
Notiz: Verify terminal wiring diagrams before replacement to avoid wiring errors
Air Shipment Compliance & Zertifizierungen

6.1 Shipment Regulation

Abschluss: Pure electromechanical component, no built-in lithium battery or super capacitor, ungefährliche Güter

Shipping Class: Ordinary cargo, no UN38.3 test or dangerous goods packaging required

Packaging Advice: Pack individually with anti-static bag; use hard carton for anti-deformation; separate bulk goods with partition boards

6.2 Hauptzertifizierungen

Certificate	Standard	Status	Applicable Area
CE	EN/IEC 61984	Compliant	EU & EEA
UL	UL 508	Compliant	Nordamerika
CSA	CSA C22.2 No.14	Compliant	Kanada
Lloyd’s	Marine Standard	Compliant	Marine & Offshore-Technik
RoHS	2011/65/EU	Compliant	Global environmental compliance