A9P54603 Schneider Electric Miniature Circuit Breaker

A9P54603 is a 1P+N disyuntor miniatura (iC40N) from Schneider Electric’s Acti9 series, with a rated current of 3A and a Type C tripping curve. It is used for overload and short-circuit protection in terminal power distribution systems.

1. Core Product Parameters

1. Product Functions and Features
2. Core Protection Functions

Protección contra sobrecarga: Automatically cuts off the circuit when the current exceeds the rated value for a certain period (based on thermal-magnetic tripping principle)

Protección contra cortocircuitos: Rapidly (en milisegundos) cuts off the circuit when a short-circuit fault occurs (sudden current surge)

Electrical Isolation: Provides a visible break point for easy inspection and maintenance

2. Características técnicas

Thermal-Magnetic Tripping: Combines bimetallic strip thermal effect and electromagnetic tripping principle to provide both overload and short-circuit protection

High Breaking Capacity: 10kA short-circuit breaking capacity, capable of reliably interrupting high-energy fault currents

Compact Design: Only 18mm wide, enabling dense installation in standard distribution boxes

PC Flame-Retardant Housing: Made of high-temperature resistant and flame-retardant material, ensuring safety and reliability with low flammability

Visual Trip Indicator: Clear red indicator after tripping for easy fault identification

III. Model Code Interpretation

A9P54603 Model Meaning:

A9: Acti9 Series (5th Generation)

PAG: Product Type Code (Protection Products)

546: Internal Series Code (iC40N Series)

03: Corriente nominal (3A)

1. Escenarios de aplicación

The A9P54603 circuit breaker is suitable for the following scenarios:

1. Residential Power Distribution Systems:

– Lighting circuit protection (3A suitable for small lighting loads)

– Circuit protection for small electrical appliances (p.ej., Televisores, cargadores, etc.)

2. Commercial and Industrial Applications:

– Control circuit protection (p.ej., PLCs, relevos, etc.)

– Power supply circuits for small equipment

– Protection of low-power electrical appliance groups in office areas

3. Special Applications:

– Smart home control systems

– DC side protection of solar inverters (requires matching with appropriate DC circuit breakers)

1. Comparison with Other Series

A9 Series vs E9 Series vs R9 Series:

E9 Series (4th Generation): Orange exterior, basic protection functions, cost-effective

A9 Series (5th Generation): Black exterior, improved performance, higher breaking capacity, and greater reliability

R9 Series (6th Generation): Green exterior, further optimized performance and intelligence

1. Precauciones de uso
2. Selection Matching: Ensure the load current does not exceed the circuit breaker’s rated current (3A) to avoid frequent tripping
3. Especificaciones de instalación:

– Must be installed on a 35mm DIN rail to ensure good contact

– Terminal torque must meet requirements (usually 2.5Nm) to prevent poor contact and overheating

3. Recomendaciones de mantenimiento:

– Regularly inspect the circuit breaker for abnormal heating or damage

– Always disconnect the upstream power supply before replacement to ensure safety

4. Condiciones ambientales:

– Temperatura de funcionamiento: -5℃~+40℃, avoid high-temperature or humid environments

– Altitude not exceeding 2000m to ensure insulation performance

Resumen

A9P54603 is a reliable 1P+N miniature circuit breaker from Schneider Electric. Its 3A rated current and Type C curve make it particularly suitable for protecting small lighting and general power distribution circuits. As part of the Acti9 series, it combines safety, reliability, y diseño compacto, making it a commonly used basic protection device in modern building electrical systems