Eaton CEAG GHG5114306R0001 Presa industriale

Prodotto: Explosion-proof Wall-mounted Industrial Socket (Presa per montaggio a parete Ex). CEAG tedesco (Eaton’s explosion-proof brand), Serie GHG511, CEE-type industrial socket for hazardous areas

Parametri tecnici fondamentali

Articolo	Specifica
Modello	GHG5114306R0001
Corrente nominale	16UN
Tensione nominale	200‑250V AC (230V, 6H, codice colore blu)
Poli	3P (L‑N‑PE)
Protezione dall'ingresso	IP66 (mantenuto quando la spina è completamente inserita)
Materiale dell'alloggiamento	Glass‑fibre‑reinforced polyester, black housing with blue socket insert
terminale	Screw‑type terminals for 1.5‑4.0 mm² conductors
Ingresso cavi	1×M25 explosion‑proof cable gland, 1×M25 blanking plug
Temperatura operativa	-20℃ ~ +40 ℃
Peso	ca. 1048 G
Explosion‑proof Certification	ATEX: II2G Ex ed IIC T6; II2D T60℃; Suitable for Zone 1/2 gas hazardous areas, Zone 21/22 dust hazardous areas
Standard applicabili	IEC 60309‑2, IEC 60079 series

Decodifica del modello

GHG511: CEAG explosion-proof plug-and-socket series

4: Wall-mount receptacle

3: 3-palo

06: 6-hour phase position (230V blue code)

R0001: Versione / suffisso dell'ordine

Scenari applicativi tipici

Impianti chimici, olio & gas facilities, pharmaceutical plants, miniere, flour/grain dust workshops, piattaforme offshore. Used as power interfaces for on-site maintenance and mobile equipment in Zone 1/2 gas hazardous areas and Zone 21/22 dust hazardous areas.

Mating Plug

Matching series plug: GHG5113306R0001 (16UN, 3-palo, 6h explosion-proof plug)

Reference Equivalent Replacement Models

GHG5114306R0002: Same electrical specifications, different cable-entry configuration, differs only in order suffix.

Appalti & Customs Information

Customs Tariff Code: 85366990 (Electrical sockets). Prodotto in Germania. Typical import lead-time: 30-40 giorni lavorativi. Stock locale limitato in Cina; second-hand units are widely circulated.

Avviso: Ordinary non-explosion-proof plugs must NOT be used with this unit. Replacement spare parts shall maintain identical explosion-proof rating. Ordinary IP66 industrial sockets cannot serve as direct substitutes.

Eaton CEAG GHG5114306R0001 Datasheet Key Extract

Surface-mount wall-mounted explosion-proof receptacle with integrated load-break switch. Permits make-and-break under 16A load. Never energise the socket without a plug fully inserted.

Full Technical Specifications

Articolo	Specifica
Ordine n.	GHG5114306R0001
Serie	GHG511 (CEAG hazardous‑area plug‑and‑socket system)
Ratings	16UN, 200‑250V AC, 6h phase position, blue 2P+E (3‑pole L‑N‑PE)
Explosion‑proof Certificates	ATEX II2G Ex ed IIC T6; II2D T60℃; IECEx certified; Zone 1/2 gas, Zone 21/22 dust
Protezione dall'ingresso	IP66 (plug fully inserted). Do not energise without plug fitted.
Alloggiamento	Black glass‑fibre‑reinforced polyester; chemical‑resistant, resistente agli urti
Cablaggio	Morsetti a vite, conductor cross‑section 1.5‑4.0 mm²
Ingresso cavi	1×M25 Ex‑gland, 1×M25 blanking plug; dual‑entry reconfiguration feasible
Temperatura ambiente	-20℃ ~ +40 ℃
Standard	IEC60309‑2, IEC60079 series, EN60947‑3
Mating Plug	GHG5113306R0001 (16UN, 3-polo, 6h explosion‑proof plug)
Peso	ca. 1.05 kg

Installazione & Operational Key Points (Manual Highlights)

Integrated load-break switch: Built-in switching mechanism allows 16A load-breaking operations. Ordinary non-Ex plugs are strictly prohibited.
Montaggio: Surface wall-mount via four fixing screws. Outdoor installation permitted; avoid heavily corrosive atmospheres.
Cablaggio: Must deploy certified explosion-proof cable glands matching M25 cable-entry size. Unused M25 openings must be sealed with original-equipment blanking plugs.
Manutenzione: Periodically inspect seals and housing for cracks. Explosion-proof mating surfaces must not be ground or dented. Replace complete unit upon damage; no unauthorised modification allowed.
Messa a terra: PE terminal shall be reliably earthed; earthing resistance shall comply with GB3836 requirements for explosion-proof equipment.
Spare-parts policy: Damaged sealing gaskets or cable glands must be genuine CEAG OEM spares. General-purpose gaskets do not satisfy Ex ed explosion-proof requirements.

Spiegazione del suffisso

GHG5114306R0001: Single M25 cable-entry version

GHG5114306R0002: Dual M25 cable-entry version. Identical electrical performance; only cable-entry layout differs, direct mechanical interchangeability guaranteed.

Alternative Sourcing List

OEM Imported Direct Replacement

GHG5114306R0002: Eaton original, dual-M25 entry, funzionalmente equivalenti, more commonly-ordered part number.

Attenzione: GHG512 series is rated 32A; different current rating, non una sostituzione immediata.

Domestic Chinese Equivalent Alternatives (Zone 1/2, Zone 21/22, Ex ed IIC T6, 16A 230V 3-pole, IEC60309-2 compliant)

⚠️ For project deployment, verify explosion-proof certificates, 6-hour phase position marking and IP66 rating. Many domestic units lack integrated load-break switches and shall only be disconnected under no-load conditions.

Huarong BLJ85-16/220-3 Explosion-proof Industrial Socket (Ex ed IIC T6, 16UN, 3-palo, montato a parete)
Xianghua BCZ8050-16/3 Explosion-proof & anti-corrosion plug-socket assembly, GRP housing, suitable for Zone 1/2 hazardous areas

Critical Reminder: Original imported CEAG GHG511 features integrated load-break switch. Most conventional domestic explosion-proof sockets have no load-break capability and support only no-load mating/unmating. Confirm load-break requirement before selection.

Appalti & Lista di controllo per l'ispezione delle unità di seconda mano