Mitsubishi PLC Power Supply Module A1S63P

Model Segment Definition

Posizionamento centrale: Provides stable DC5V/5A system power for AnS series PLCS. It is dedicated to the base power slot and supplies power to the CPU and I/O modules via the base bus.

2. Core Specification Parameter Table

3. Elenco degli accessori & Linee guida per l'installazione

3.1 Accessori standard

Module body ×1

Installation manual ×1

Terminal label sticker ×1

Fixing buckle ×2 (for base locking)

3.2 Precauzioni per l'installazione

1. Position Requirement: Must be installed in the dedicated power slot on the far left of the A-series base unit; do not insert into I/O slots.
2. Specifiche di cablaggio:

Potenza in ingresso: L+ (DC24V+), l(DC24V-), connect to external DC24V power supply.

Base Power Supply: Automatically connected via gold fingers at the module bottom, no additional wiring required.

3. Redundancy Design: Dual power redundancy is not supported. For redundant power supply, select models such as Q-series Q63RP.
4. Spazio di dissipazione del calore: Reserve ≥50mm clearance above the module to avoid direct contact with heat-generating components.
5. Competitor Replacement / Cross-brand Comparison

4.1 Mitsubishi Same-series Replacement Models

4.2 Cross-brand Replacement Solutions

5. Linee guida per la selezione & Soluzioni sostitutive

5.1 Core Selection Criteria

✅ Input Power Matching: Confirm on-site DC24V power supply with fluctuation ≤±30%.

✅ Load Calculation:

Single module max load: 5A DC5V

Recommend 20% margine riservato (actual load ≤4A) to prevent frequent overcurrent protection triggering.

Esempio di calcolo: processore (0.8UN) + 8-slot I/O (0.3A per slot) = 3.2A, meets requirement.

✅ System Expandability: If expansion to more than 8 slots is needed in the future, choose A1S61PN (8Un'uscita).

✅ Environmental Adaptation: Ensure operating temperature ≤55℃ and humidity within industrial standard range.

5.2 Aggiornamento & Replacement Routes

Scheme A: Same-series Upgrade (Lowest Cost)

Load increase: A1S63P → A1S61PN (AC input, 8Un'uscita)

Battery backup required: A1S63P → A1S63P-BAT (version with battery interface)

Scheme B: A-series to Q-series Upgrade (Performance Improvement)

1. Power Module: A1S63P → Q63P (Ingresso 24 V CC, 5Un'uscita)
2. Base Adaptation: Adopt QA extension base (per esempio. QA65B), original A-series I/O modules can be retained.
3. Vantaggi: Improved system stability, supports more I/O expansion, compatible with Q-series high-speed modules.

Scheme C: Full Upgrade to iQ-R Series (Future-oriented)

Power Module: A1S63P → R63P (Ingresso 24 V CC, 5Un'uscita)

Adaptation Method: Use conversion adapter to replace old modules gradually.

Vantaggi: Supports Ethernet / CC-Link IE Field Network, enhances data processing capability and system integration.

5.3 Risoluzione dei problemi comuni

The A1S63P is a dedicated DC24V input / DC5V 5A output power supply module for Mitsubishi AnS series PLCs. Featuring compact structure and stable performance, it is ideal for small and medium-sized automation systems.

Durante la selezione, focus on input power type, load capacity and system expandability. For upgrade, choose high-power models in the same series or migrate to Q-series / iQ-R series via adapted base units to achieve system performance enhancement.

Complete Model List of Mitsubishi AnS Series PLC (Structured Classification)

1. Quick Overview of Model Naming Rules

2. CPU Modules (Core Control Unit)

3. Power Supply Modules (System Power Core)

4. Base Units (Module Mounting Carrier)

5. Digital I/O Modules (Discrete Control)

5.1 Input Modules (A1SX Series)

5.2 Output Modules (A1SY Series)

6. Analog I/O Modules (Controllo del processo)

6.1 Moduli di ingresso analogici (A1S68AD Series)

6.2 Moduli di uscita analogici (A1S62DA Series)

6.3 Temperature Input Modules (A1S68TD Series)

7. Special Function Modules (Advanced Control)

7.1 Posizionamento / Motion Control Modules (A1SD Series)

7.2 High-speed Counter Modules (A1SD62 Series)

7.3 Other Special Modules

8. Network Communication Modules (Data Interaction)

8.1 Serial Communication Modules (A1SJ71C Series)

8.2 Moduli Ethernet (A1SJ71E Series)

8.3 Fieldbus Modules

9. Note supplementari

9.1 Posizionamento in serie

AnS Series: Compact modular PLC, positioned between FX series (piccolo) and Q series (grande), suitable for small and medium-sized control systems.

Compatibilità: AnS modules can be adapted to Q-series PLC via QA extension base units for system upgrade.

9.2 Interruzione & Replacement Information

The AnS series was fully discontinued in September 2014.

Officially recommended replacement series: iQ-R Series (Alte prestazioni), Q Series (Medio), L Series (Compatto).

9.3 Punti chiave della selezione

CPU Selection: Choose according to program capacity, I/O points and processing speed.

Calcolo della potenza: Ensure total DC5V current consumption ≤ 80% of the power module rated value.

Capacità di espansione: Max support 11-slot base unit, expandable up to 2048 Punti di I/O.