SHAKO PU520-02S-DC24V Pneumatic Solenoid Valve

Marca: SHAKO (Taiwan) | 5/2 Way, Single Solenoid, Internal Pilot Pneumatic Elettrovalvola

✅ Definizione del codice modello

PU520: 5/2 five-port two-position valvola

02: Main port G1/4″; Exhaust port G1/8″

S: Solenoide singolo (ritorno primaverile, monostable)

DC24V: Tensione della bobina DC24V (Order code No.9)

Standard thread: G thread; Opzionale: TNP / Rc

Suffix L = with LED indicator

📌 Core Technical Specifications

📎 Matching Parts & Alternative

1. Manifold base: MF520-02 (multi-station manifold available)
2. Energy-saving upgrade: E-PU520-02S-DC24V, lower power consumption and less heat rise for long-term energization
3. Cross-brand equivalent models:

artico: 4V210-08 DC24V

Mindman: MVSC-220-4E1 DC24V

⚠️ Important Notes

Single solenoid design: auto return when power off. Select PU520-02D (doppio solenoide) for latching function without power supply.

Internal pilot requires minimum inlet pressure ≥ 0.15 MPa. Select external pilot type PU520A for low-pressure or vacuum applications.

Standard DIN43650 socket; LED version with suffix L is optional.

Complete Technical Datasheet — SHAKO PU520-02S-DC24V

Nome e cognome: PU520-02-S DC24V 5/2-Way Internal Pilot Single Solenoid Valve (PU Series Pilot Valve)

Original PDF source: SHAKO official PU520 series catalogue

1. Codifica del modello

PU520 02 S DC24V

PU520: 5/2 five-port two-position pilot solenoid valve

02: Main air port G1/4″; Exhaust port G1/8″

S: Solenoide singolo, ritorno primaverile (auto reset on power loss)

DC24V: Tensione della bobina DC24V

Thread default: G; Optional Rc (P.T), TNP; Suffix L = with LED indicator

2. Caratteristiche del prodotto
3. Medium-size body with large flow capacity, effective area 18 mm²
4. Equipped with lockable manual override, no electricity or air supply needed for field test
5. Anodized aluminum body, wear-resistant and long service life
6. DIN43650 standard socket, IP65 protection suitable for industrial sites
7. Can be mounted on manifold or with individual base
8. Optional energy-saving coil E-PU520-02S-DC24V, low power and low temperature rise
9. Rated Technical Data

⚠️ Do not use this internal pilot model under low pressure or vacuum; choose PU520A-02S (external pilot) instead

4. Definizione del porto (5/2 Way)

P: Ingresso (G1/4)

UN: Produzione 1 (G1/4)

B: Produzione 2 (G1/4)

R, S: Two exhaust ports (G1/8)

De-energized state: P ↔ A open; B ↔ S exhaust

Energized state: P ↔ B open; A ↔ R exhaust

Auto reset to P-A open when power cuts off (single solenoid characteristic)

5. Bobina & Cablaggio (DC24V DIN43650)

Pin definition: 1(+), 2(-), PE earth

Non-polarized coil version: terminali 1 & 2 can be swapped; LED version is polarized – wrong polarity only causes indicator off without damaging the valve

Consumo energetico: Standard coil ≈4.8W; E energy-saving coil ≈1.2W

Cable outer diameter: Φ6～Φ8mm; use waterproof cable gland

Grounding is mandatory; install full sealing gaskets for dusty & splash environments

6. Overall & Dimensioni di montaggio (PU520-02-S)

Body width: 26 mm

Fori di montaggio: 2×Φ4.3; hole spacing: 70 mm

Altezza totale (con bobina & PRESA): ca. 100 mm

Lunghezza totale: ca. 130 mm

Two mounting options:

1. Manifold mounting: fixed on MF520-02 (recommended for multi-valve centralized control)
2. Individual pipe mounting: with separate base

Manifold MF520-02 supports 2~10 stations, with blanking plugs and mufflers optional

7. Installazione, Messa in servizio & Operation Rules

Installazione

1. Install air filter (≥40μm) upstream; air treatment triple unit is recommended; no oil & dirt contamination allowed
2. No strict mounting orientation; keep coil facing upward to avoid water accumulation
3. Purge all piping before connecting the valve to prevent metal chips jamming the spool
4. Install mufflers on exhaust ports for noise reduction and dust prevention; never block exhaust ports

Manual Override Button

Press down: force spool to shift; rotate 90° to lock the shifted position for continuous testing

Reset: turn back to unlock; spring resets automatically after release

Manual lock is only for commissioning; do not keep locked during normal operation

Power-on Commissioning Sequence

1. Supply compressed air up to rated pressure and check for air leakage
2. Apply DC24V power and verify cylinder movement; check LED lamp (L model)
3. Cut power to confirm automatic spring reset
4. Troubleshooting List

9. Elenco pezzi di ricambio
10. Manifold base: MF520-02 (1-stazione), MF520-02-XX (multi-station)
11. DIN socket: Standard socket / LED indicator socket
12. Muffler: BSL-M5 / BSL-01 (fits G1/8 exhaust port)
13. Blanking plugs, guarnizioni, separate coil assembly
14. Isolation block SOB52-02: Replace valve without shutting down main air supply (online maintenance without line stop)
15. Modelli equivalenti multimarca

artico: 4V210-08 DC24V

Mindman: MVSC-220-4E1 DC24V

Chelico: SV-5201 DC24V

Nota: Mounting hole pitch and base are not interchangeable; only function & port size match

11. Programma di manutenzione

Normal environment: Blow exhaust ports and check air leakage every 3 mesi

Dust/humid environment: Ispezione mensile; disassemble & clean spool and inspect NBR seals every 6 mesi

Seal service life: ca. 5 million switching cycles; replace seal kit before reaching cycle limit

Working Principle — SHAKO PU520-02S-DC24V

5/2 five-port two-position, singolo solenoide, internal pilot solenoid valve

Principio fondamentale: The coil only actuates a small pilot valve; air pressure difference from main supply pushes the main spool to shift; spring resets automatically when power cuts off (not direct pull by coil like direct-acting valves)

Struttura interna

1. Solenoid assembly (DC24V coil + armatura): controls the small pilot valve
2. Pilot air circuit: internal pilot, air is tapped from P inlet; no external control air required
3. Bobina principale & ritorno a molla
4. Five ports: P (ingresso), A/B (outlets), R/S (exhausts)

Key limitation: Internal pilot needs minimum inlet pressure ≥0.15 MPa (1.5 sbarra) to build pressure difference for spool actuation; select PU520A external pilot for low-pressure & vacuum applications

1. Stato diseccitato (Normal Position, Ritorno di primavera)

Bobina diseccitata, armature drops, pilot valve closes; pilot control chamber vents

Right-side return spring pushes main spool to left

Air circuit: P ↔ A open; B ↔ S exhaust

Cylinder A side air inlet, B side exhaust; cylinder stays at initial position

2. Energized State (DC24V Powered On)

Bobina eccitata, magnetic force pulls armature up; pilot valve opens

Compressed air from P inlet flows through pilot hole into right-side control chamber

Pressure on right side overcomes spring force; air pressure pushes main spool to shift

Air circuit switches: P ↔ B open; A ↔ R exhaust

Cylinder B side air inlet, A side exhaust; cylinder reverses movement

3. Power Cut Off Again

Magnetic force disappears, pilot valve closes; air inside pilot chamber vents out from pilot exhaust hole

Main spool is pushed back to original position by return spring; air circuit reverts to P-A open status

✅ Feature of single solenoid (S): auto reset on power loss (monostable); select double solenoid (D) for position latching without power supply.

Manual Override Principle

The lockable manual push button mechanically actuates the pilot spool without power or air supply, simulating energized status for field commissioning. Rotate 90° to lock the shifted position; remember to unlock after testing.

Advantages over Direct-Acting Valves

Bassa potenza della bobina (≈4.8W), piccola dimensione, low temperature rise

Large spool flow capacity (18 mm² effective area)

Supporta 100% continuous energization (100% ED)

Svantaggio: Minimum actuating pressure threshold; cannot work under zero pressure

Air Circuit Logic Summary

SHAKO Solenoid Valve Full Series Catalogue (Per funzione & Misurare)

Nota: PU, SONO, BM, BW, PS, CY = pneumatic directional control valves (5/2,5/3,3/2); PU220/SPU220/PU225 = 2/2 fluid valves (aria, acqua, olio); Prefix E = energy-saving low-power coil

Suffix General Definition

S: Solenoide singolo (ritorno primaverile, monostable)

D: Doppio solenoide (aggancio, no power hold)

UN: External pilot (vuoto & low-pressure use)

B: Built-in silencer

X/Y: 5/3-way mid-position function (X=closed center; Y=exhaust center; Z=pressurized center)

l: Con indicatore LED

E: Energy-saving coil

Port code: 01=G1/8; 02=G1/4; 03=G3/8; 04=G1/2

1. 5/2 2-Position 5-Port / 5/3 3-Position 5-Port Pilot Solenoid Valves (Main cylinder control)

AM520 Series (18mm narrow body, G1/8 port, equivalent to Airtac 4V110)

AM520-01S / AM520-01D (5/2 single/double solenoid)

AM530X/Y-01D (5/3 closed/exhaust/pressurized center)

AM520A: External pilot; AM520B: Built-in silencer

Matching manifold: MF520-01

BM520 Series (22larghezza mm, Attacco G1/4, equivalent to Airtac 4V210)

BM520-02S / BM520-02D

BM530X/Y-02D (5/3 three-position)

BM520A: External pilot; E-BM520: Versione a risparmio energetico

Matching manifold: MFB520-02

PU520 Series (Your selected medium size, 26larghezza mm, large flow, G1/4~G1/2)

PU520-02S/D, PU520-03S/D, PU520-04S/D (5/2 two-position)

PU530X/Y-02D, PU530X/Y-03D, PU530X/Y-04D (5/3 three-position)

PU520A: External pilot (vacuum/low pressure); PU520AB

E-PU520: Energy-saving coil (bassa potenza & fuoco basso)

Matching manifold: MF520-02 / MF520-03 / MF520-04

BW520 Series (Wide body high flow, G3/8 & G1/2, equivalent to 4V410)

BW520-03S/D, BW520-04S/D

BW530X/Y-03D, BW530X/Y-04D

PS520 Series (ISO standard mounting, ISO1/ISO2 interchangeable base)

PS520-02S/D, PS520-03S/D, PS520-04S/D

PS520F: ISO flange mounting

E-PS520: Energy-saving model

CY520 / CY525 Series (Economical pilot valves)

CY520-02S/D, CY520-03S/D

E-CY520, E-SCY520 (SUS316 stainless steel anti-corrosion version)

CY525: Combined 3/2 + 5/2 funzione

1. 3/2 3-Port 2-Position Pilot Solenoid Valves (Single-acting cylinder, vuoto & blow-off control)

PU320 / PU322N: 3/2 pilot type, porta 01/02/03/04

BM320: 3/2 valvola pilota

E-AM325: Energy-saving direct-acting 3/2 valvola

III. 2/2 2-Port 2-Position Solenoid Valves (Fluid control: aria, acqua, olio, vapore, corrosive low-pressure media)

Ad azione diretta / pilot-operated; brass body / SUS316 stainless steel; normalmente chiuso (NC) di serie

1. PU220A Direct-acting (bassa pressione & vacuum applicable)

PU220A-01/02/03/04/06/08

2. SPU220AR SUS316 stainless steel direct type, anti-corrosion for air & acqua

SPU220AR-01/02/03; E-SPU220AR energy-saving version

3. PU225X Pilot-operated 2/2 (high pressure large flow, massimo. 50 sbarra)

PU225X-03/04/06/08

4. PU225S Steam-specific 2/2 valvola; flange type PU225SF
5. DC220 Large-bore 2/2 valvola (3/4″~3″, dust removal & fornitura d'acqua)
6. Modelli speciali

E-SPU520: SUS316 stainless steel 5-port pilot valve for corrosive environment

Explosion-proof coil optional: Compatible with PU/BM/PS series, ATEX T4 certified

Pneumatic pilot valves (no solenoid): PA520, PB520, PP520, same body size as solenoid versions

1. Selection Cross Reference Table

1. Manifold Naming Rule

MF520-02-03: PU520 series, G1/4 thread, 3-collettore di stazione; MFB520 = dedicated manifold for BM520 series