コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ
バナー SBFX1 Fiber Optic Scanner Module (MULTI-BEAM Series)
注記：SBFX1 is only a scanner block. It does NOT include power module or output module and cannot be powered-up independently. A complete sensor system requires a Power Block plus a Logic Module.
部品番号: 16652, 940 nm infrared light source, high excess-gain fiber amplifier block, supports through-beam and diffuse fiber detection.
主な仕様
| アイテム | パラメータ |
| モデル | SBFX1 (MULTI‑BEAM Series) |
| タイプ | Fiber‑optic scanner block (integrated transmitter & 受信機) |
| Compatible Fiber | Bifurcated fiber or two separate fibers; glass fiber preferred, minimum bundle diameter 0.5 mm |
| Detection Modes | 拡散する, 透過ビーム (sensing range fully determined by fiber specification) |
| 応答時間 | 10 ms (オン/オフ) |
| ハウジング | Reinforced VALOX (PBT) 囲い, stainless‑steel fasteners |
| Enclosure Rating | NEMA1/3/12/13; IEC IP54 |
| 動作温度 | -40℃～+70℃ |
| インジケータ | AID alignment red LED; blink frequency indicates received light intensity for fiber alignment assistance |
| 寸法 | 114 × 53 × 40 mm |
| 光源 | Modulated infrared LED 940 nm |
| 原産国 | アメリカ合衆国 |
動作原理 & Configuration Instructions
- SBFX1 has no built-in power supply and no output. Complete 3-piece modular assembly:
SBFX1: Scanner block (light transmit/receive + amplification)
Power Block: Provides AC/DC power supply
Logic Module: Select light-on/dark-on, timing, NPN/PNP/relay output
- Fiber Wiring:
拡散モード: Connect one bifurcated fiber
透過モード: Connect two separate fibers (one transmit, one receive)
- 利点: High excess gain. Stable performance under harsh conditions, high fiber attenuation and small-bundle fiber applications; well-suited for dusty, oily industrial environments.
注記: For long-range through-beam applications, Banner officially recommends separate SBEXF (transmit) + SBRXF1 (receive) scanner blocks. SBFX1 is not recommended for extra-long through-beam detection.
代表的な用途
Object presence detection on machine tools, metallurgical and rubber-plastic equipment under harsh conditions
Narrow-space detection (with 0.5 mm small-bundle fiber heads)
Object sensing in high-temperature, dusty and oily environments
後付け & replacement for legacy MULTI-BEAM photoelectric systems
Related Variant Models
SBFX1: Standard 10 ms response scanner block
SBFX1MRM: 5 ms fast-response version, different part number
SBEXF: Transmit-only scanner block; SBRXF1: Receive-only scanner block (for long-range through-beam)
交換オプション
The original SBFX1 belongs to the legacy Multi-Beam modular series and is phasing out in some supply channels.
Modern Banner drop-in alternatives: DF-G3, DF-G2 all-in-one fiber amplifiers. No stacked power/logic modules required for simpler wiring and setup.
トラブルシューティングガイド
- AID red LED off: Poor fiber connection, broken fiber, or Power Block not installed.
- LED solid ON but no output: Verify Power Block and Logic Module configuration; check light-on / dark-on setting.
- Dim flickering LED: Excessive fiber attenuation or dirty fiber end-faces. Clean fiber tips first.
- For low-temperature installations, confirm temperature rating for the entire assembly including the Power Block.
