コンタクタ,サーキットブレーカー,ソーラーインバーター,電気メーター,太陽電池
EOCRSSD-30DF7 is a digital motor protector シュナイダーエレクトリック社製 (formerly Samwha, 韓国) with current range 3-30A and 110VAC control power supply. It provides triple protection against overload, phase loss and locked rotor. It is applicable for precise protection of three-phase low-power motors, capable of replacing traditional thermal relays to improve protection accuracy and fault diagnosis efficiency.
- モデルコードの定義
| コードセグメント | 説明 |
| EOCR | Electronic Over Current Relay, core product positioning |
| SSD | Solid State Digital, adopting solid-state electronic components and digital control technology |
| 30 | Current protection range: 3～30A (direct connection, no external CT required) |
| D | デジタル表示, equipped with digital tube to display real-time 3-phase average current and fault status |
| F7 | Control power specification: 110VAC±15% (50/60Hz); other options: M7(220VAC), B(24VAC/DC) |
- Main Technical Specifications
| カテゴリ | パラメータ | 備考 |
| 基本情報 | ||
| ブランド | シュナイダーエレクトリック (Former Samwha Korea) | Produced in Iksan, Korea; Authorized agent in China: Shanghai Hanshi Electric |
| 製品タイプ | Digital Overcurrent Relay / Motor Protector | より高い精度 (±5%) than traditional thermal relay |
| 電気的パラメータ | ||
| 定格動作電圧 | 600Vと (UL) / 690Vと (CSA, IEC 60947-4-1) | Suitable for low-voltage motor circuits |
| 定格インパルス耐電圧 | 6kV | IEC準拠 60947-4-1 |
| 制御電源 | 110VAC±15%, 50/60Hz | Matched with F7 code |
| 消費電力 | ≤3W | Low power consumption for long-term operation |
| 保護パラメータ | ||
| 調整可能な電流範囲 | 3~30A continuously adjustable | Adjustment ratio: 10:1 |
| 保護機能 | 1. 過電流 (O-Time: 0.5~10s adjustable) | Independent adjustable start delay D-Time |
| 2. Phase loss (fast protection within 3s) | ||
| 3. Locked rotor (combined D-Time+O-Time protection) | ||
| リセットモード | マニュアル / 電気 (オプション) | Reset required after fault for restart |
| 出力 & 画面 | ||
| 出力接点 | 1 ノースカロライナ州 + 1 いいえ (2-SPST) | 接点定格: 3A/250VAC |
| 表示モード | Digital tube display | Real-time 3-phase average current, flashing fault code indication |
| 物理的な & 環境 | ||
| 寸法 | 45×75×110mm, standard DIN rail mounting | Compact size saves cabinet space |
| 保護等級 | IP20 (フロントパネル) | Suitable for installation inside control cabinets |
| 動作温度 | -20℃～+60℃ | Adaptable to industrial temperature variation |
| 保管温度 | -40℃ ~ +85℃ | Meet transportation and storage requirements |
| 認証 | ||
| 国際認証 | CE, UL, CSA | Comply with IEC 60947-4-1, global applicable |
| 航空貨物のコンプライアンス | No built-in lithium battery, conform to UN38.3 | Shippable as general cargo without special packaging |
- Cross-brand Comparison
| モデル | 電流範囲 | 制御電源 | 画面 | 保護 | 価格帯 | 応用 |
| Schneider EOCRSSD-30DF7 | 3～30A | 110VAC | Digital display | 過負荷 / Phase loss / Locked rotor | 350~450CNY | 3-phase low-power motors with fault diagnosis demand |
| ABB CM-MSS.31P | 3～30A | 24~240VAC/DC | 表示灯 | 過負荷 / Phase loss / Locked rotor | 400~500CNY | General industrial motors, unified brand matching |
| Siemens 3RB2026-1SB0 | 2.5～32A | 24~240VAC/DC | 表示灯 | 過負荷 / Phase loss | 300~400CNY | Supporting Siemens PLC, 基本的な保護 |
| Omron K8DS-PH1 | 3～30A | 100~240VAC | Digital display | 過負荷 / Phase loss / Locked rotor | 380~480CNY | 自動化された生産ライン, 高精度の保護 |
| Chint NR2-32 | 2.5～32A | No control power | 表示なし | 過負荷 / Phase loss | 50~80CNY | Economy application, low precision requirement |
選定のポイント
- Display function: EOCRSSD-30DF7 supports real-time current monitoring and fault diagnosis, superior to indicator-light-only models
- Protection accuracy: Electronic protector (±5%) far exceeds thermal relay (±15%), extending motor service life
- Control power: 110VAC F7 version fits specific regional power grids, confirm on-site power supply first
- 全シリーズモデルリスト
EOCR-SSD Series Classification
| 電流範囲 | ベースモデル | Power Options | Complete Model Examples |
| 0.5~6A | EOCRSSD-05S | S:24~240VAC/DC | EOCRSSD-05DF7, EOCRSSD-05DM7, EOCRSSD-05DB |
| F7:110VAC | |||
| M7:220VAC | |||
| W:380~440VAC | |||
| 3～30A | EOCRSSD-30S | 同上 | EOCRSSD-30DF7, EOCRSSD-30DM7, EOCRSSD-30DW |
| 5~60A | EOCRSSD-60S | 同上 | EOCRSSD-60DF7, EOCRSSD-60DM7, EOCRSSD-60DS |
注文コード & 付属品
標準注文番号: EOCRSSD-30DF7
取付金具: EOCR-MNT-01 (DIN rail type)
Extension cable: EOCR-CAB-05 (5メートル) / EOCR-CAB-10 (10メートル)
Test kit: EOCR-TEST-KIT (including analog load & calibrator)
- 一般的な障害 & Maintenance Solutions
| 故障現象 | 考えられる原因 | トラブルシューティングの手順 | ソリューション | 予防措置 |
| No digital display | 1. Control power disconnected | 1. Measure terminal voltage | 1. Connect 110VAC correctly | Check power spec before installation |
| 2. Wrong wiring polarity | 2. 配線を確認してください | 2. Adjust connection (AC non-polar) | ||
| 3. Internal fuse blown | 3. Inspect internal fuse | 3. Replace 0.5A fuse | ||
| 誤トリップ | 1. Low current setting | 1. Confirm motor rated current | 1. Set current to 1.1 times rated value | Set parameters per motor nameplate |
| 2. Short start delay | 2. Extend D-Time | 2. D-Time = motor start time +1s | ||
| 3. Power harmonic interference | 3. Test power THD | 3. パワーフィルターを取り付ける | ||
| Failure to trip | 1. Excessively high current setting | 1. Check current setting | 1. Set current to 0.9 times rated value | Regular contact inspection, avoid overload |
| 2. Damaged output contacts | 2. Test contact continuity | 2. Replace contact module | ||
| 3. Internal circuit failure | 3. Inspect internal components | 3. Contact after-sales service | ||
| Garbled display | 1. 電圧変動 | 1. Test power stability | 1. Install voltage stabilizer | Keep away from inverters, ensure good grounding |
| 2. Electromagnetic interference | 2. Check grounding | 2. Optimize grounding | ||
| 3. Program error | 3. Power cycle restart | 3. 工場出荷時の設定を復元する |
メンテナンスサイクル
- 日常点検: Check display status and alarm indicator
- Monthly maintenance: Dust cleaning, tighten wiring terminals
- Quarterly calibration: Verify protection parameter accuracy
- Annual overhaul: Inspect internal components, replace aging parts
- アプリケーションシナリオ & Cases
該当するシナリオ
産業オートメーション: CNC工作機械, コンベア, 印刷装置
水処理: ウォーターポンプ, fans with frequent startup and variable load
空調設備: Air compressors, 冷却塔ファン
Building materials industry: ミキサー, heavy-duty conveyors
Power system: Standby generators, 小型変圧器保護
Non-recommended Scenarios
High voltage motors (>690V): Adopt dedicated high-voltage protectors
Explosion-proof environment: Extra explosion-proof housing required with higher cost
Ultra-low current (<0.5あ): Choose EOCRSSD-05S or match external CT
Typical Cases
場合 1: Water Pump Motor Protection in Steel Plant
問題: Frequent false tripping of old thermal relays causing unplanned shutdowns without fault identification
解決: Install EOCRSSD-30DF7, set current 15A (motor rated 13.5A), start delay 5s
効果: False shutdown rate reduced by 62%, fault diagnosis time shortened from 2h to 5min, annual maintenance cost saved about 80,000 人民元
場合 2: Mixer System in Pharmaceutical Factory
問題: Motor burnout caused by mixer locked rotor leading to heavy losses
解決: Adopt EOCRSSD-30DF7, set locked rotor protection (D-Time=3s, O-Time=1s)
効果: Power cut within 3s once locked rotor occurs, 100% motor intact rate, avoid production stop losses
- 選択ルール
クイック選択ルール
- 電流マッチング: Set protection current within 0.9~1.1 times motor rated current
- Delay setting: Start delay (D-Time) = actual motor startup time + 1 2番
- 電源: Prioritize matching on-site control power to avoid extra transformer cost
- Display demand: Choose D-type for fault diagnosis, non-D-type for basic protection only
- 航空貨物のコンプライアンス & 認証
- Air Freight Regulation
No built-in lithium batteries or supercapacitors, fully compliant with UN38.3 air transport standards
Can be delivered as general goods, no MSDS or special shipping documents needed
Packaging suggestion: Anti-static bag + hard carton to prevent vibration damage
- Qualification Certificates
CE: Comply with EU LVD & EMC指令
UL: Meet US safety standards for North America market
CSA: Certified for Canadian market
IEC: Conform to international electrical standards for global use
