Pro-face LT3300-T1-D24-K All-in-One Controller

(PFXLT3300TADK)

位置決め: LT3000 Series, 5.7″ HMI+PLC all-in-one コントローラ (タッチスクリーン + logic control integrated), Sink output type

Suffix distinction: K = Sink (シンク出力); C = Source (出力の調達, LT3300-T1-D24-C)

基本仕様

画面: 5.7″ TFTカラー, QVGA 320×240, 65536 色 (supports blink)

電源: DC24V, allowable range DC19.2～28.8V

I/O: Built-in 32-point DIO (16から / 16する, Sink output); 0.21点あたり, max 1.6A per common terminal; supports pulse output and high-speed counter

コミュニケーション: COM1 (RS232/422/485, 9-ピンD-Sub), 10/100M Ethernet RJ45, USB1.1 Host (Type-A)

拡大: EXT1 for EX modules (まで 3 EX/TM3 modules); EXT2 optional CANopen master module (CA8-CANLT-01)

寸法: W167.5 × H135 × D77.6 mm

パネルカットアウト: W156 × H123.5 mm

保護: Front IP65f (panel mounting)

プログラム容量: マックス 15,000 logic steps; 6MB flash memory for screens

プログラミングソフトウェア: GP-Pro EX V3.01.200 or higher

生産終了 & 交換情報

EOL status: LT3300-T1-D24-K order acceptance stopped, final order date: 2024-09-02; repair support until 2031-12-02

Official recommended replacement: PFXSTC6300TADDKE (STC6300TA, Sink output)

交換ノート:

Cutout compatible for direct panel installation; slight difference in housing dimension
Resolution upgraded to VGA 640×480, screen project must be converted in GP-Pro EX
DIO pin assignment and 38-pin DIO connector are compatible, original wiring can be reused
マックス 2 TM3/EX modules directly connected to STC main unit; 3 modules require TM3XTRA1+TM3XREC1 expansion transceiver modules
STC6000 does NOT support screen blink function, blink animations in old projects need redesign
Minimum software requirement: GP-Pro EX V4.09.500+

Matching EX Expansion Modules (同じシリーズ, also discontinued)

EXM-DDI8DT / EXM-DDI16DT Digital Input

EXM-DDO8UT / EXM-DDO16UK Sink Output

EXM-DDO8TT / EXM-DDO16TK Source Output

EXM-DRA8RT / EXM-DRA16RT Relay Output

EXM-AMI2HT / AMI4LT Analog / 温度入力

EXM-AMO1HT Analog Output

The new STC platform uses Schneider TM3 modules to replace the above EX modules

Common Spare Parts / 部品番号

DIO Connector: CA7-DIOCN5-01

Power Connector: CA5-DCCNM-01

Mounting Clips: CA3-ATFALL-01

Waterproof Gasket: CA3-WPG6-01

USB Download Cable: CA3-USBCB-01

Troubleshooting for LT3300T Common Faults

電源投入時に黒い画面が表示される: Verify DC24V ≥19.2V; backlight aging is a frequent failure for this model
タッチドリフト / no touch response: Analog resistive screen aging; touch panel can be replaced separately
No DIO output action: Distinguish Sink / ソース, confirm common terminal wiring; check pulse/output assignment in program
通信障害: Check COM DIP switch, protocol and station number; verify Ethernet IP and GP-Pro EX transfer key
プログラムの損失: Backup battery failure; replace battery then re-download project + logic program

代表的な応用例 プロフェイス LT3300-T1-D24-K (HMI+PLC All-in-One)

主な利点: 5.7″ screen + built-in 16DI/16DO, native pulse output & high-speed counter, expandable via EX modules; one software GP-Pro EX for both screen graphics and logic programming. Suitable for small & medium standalone machines, eliminates separate PLC, shrinks control cabinet and reduces wiring. K version is Sink output, compatible with most NPN sensors used domestically.

場合 1: Vertical Form-Fill-Seal Packaging Machine (最も一般的な)

構成: LT3300-T1-D24-K main unit + EXM-AMI4LT temperature module

Controlled objects: Servo film pulling, sealing heating, hopper feeding, photoelectric detection, color mark positioning, pneumatic gripper

Resource utilization: Native pulse output drives film feed servo; built-in high-speed counter reads color mark sensor; DI for material level, 安全ドア, 非常停止; DO for solenoid valves and heating contactors

HMI screens: Bag length setting, production count, sealing temperature curve, 故障警報, recipe switching for multiple bag sizes

コミュニケーション: RS485 connected to temperature controllers; Ethernet uploads output and reject data to host PC

利点: Single unit handles HMI and motion logic for compact control cabinet; IP65 front panel for humid food workshop; product changeover via recipe recall without program modification

場合 2: Small Blow Molding / PET Bottle Blowing Machine

構成: LT3300-T1-D24-K + optional CA8-CANLT-01 CANopen master module

コントロール: Mold opening/closing, blow timing, heating zone temperature control, robot pick-up, 低気圧 / high-pressure blow sequence

ハイライト: CANopen module connects CANopen servos and IO slaves; high-speed counter reads encoder position; interlock logic for safety door and pressure protection

HMI screens: Blow pressure curve, heating temperature, cycle time, alarm log, manual debug page

Industry feature: Bulk export machines, fewer spare part types and simple maintenance

場合 3: Transfer Lifter / Jacking Transfer Station (Automotive Component Workstation)

構成: LT3300-T1-D24-K main unit, optional EX digital expansion

コントロール: Roller conveyor, jacking cylinder, translation servo, stop cylinder, barcode scanner signal, セーフティライトカーテン

論理: Station interlock, 位置確認, cycle timing, NG part diversion; pulse output for translation servo positioning

コミュニケーション: RS485 for barcode scanner; Ethernet upload station status to MES

価値: Independent control for single workstation, no main PLC required; easy separate commissioning and maintenance

場合 4: Small Injection Molding Auxiliary Equipment (Granulator, Dryer Hopper, Auto Loader)

構成: LT3300-T1-D24-K main unit + EXM-AMI2HT analog module

コントロール: ファン, suction valve, material level detection, 加熱, 過負荷保護, delayed feeding

機能: PID drying temperature control, high/low material level alarm, automatic suction cycle, runtime maintenance reminder

利点: Compact electrical box for auxiliary equipment; IP65 front panel suitable for dusty workshop

場合 5: Small Special Machine for Grinding / 掘削

構成: LT3300-T1-D24-K, pulse output for feed servo, high-speed counter for spindle encoder

コントロール: Spindle start/stop, feed positioning, cooling pump, clamping cylinder, 旅行制限, tool position detection

HMI screens: Feed distance, spindle speed, production count, manual jog, parameter password lock to prevent unauthorized modification

Safety logic: 非常停止, door interlock, overtravel protection; fast response via native I/O interlock

場合 6: Small Rail-Guided AGV for Material Transport

構成: LT3300-T1-D24-K + CANopen module

コントロール: Travel drive, steering, obstacle avoidance sensors, station identification, 音 & light alarm, lifting mechanism

特徴: CANopen bus for travel servo; DI for obstacle avoidance and magnetic strip station sensors; Ethernet remote monitoring of position and faults; compact panel mounted on AGV control box

注記: Limited native I/O, additional sensors require CANopen slave I/O expansion

場合 7: Chiller / Small Constant Pressure Water Supply Cabinet for HVAC

構成: LT3300-T1-D24-K + analog EX modules

Acquisition: 圧力発信器, 温度, 液面; DO controls water pumps, 冷却塔ファン, 電磁弁; RS485 communication with VFDs

機能: Constant pressure PID, pump rotation, fault backup, operation log, high/low limit alarm; remote view of pressure & temperature via Ethernet

に適しています: Small building supporting system or independent workshop cooling system, replaces separate HMI + micro PLC

場合 8: Lithium Battery Small Sorting & Test Jig

構成: LT3300-T1-D24-K native I/O + EX analog module

コントロール: Cylinder clamping, probe test, sorting gate, voltage/internal resistance sampling, OK/NG diversion

HMI screens: Test parameters, yield statistics, alarm history, barcode binding for cell ID

特徴: Simple logic and short cycle, 低コスト, compact fixture layout for parallel test stations

一般選抜 & 操作上の注意 (K Version Focus)

K = Sink (NPN compatible, シンク出力) : Direct match with most domestic NPN photoelectric and proximity sensors; select C version Source for PNP sensors
Max I/O scale: 16DI+16DO onboard, まで 3 external EX modules. Not suitable for high I/O count or multi-axis motion applications; use independent PLC + HMI instead
Pulse axis: Native pulse output for 1~2 axis simple positioning, not recommended for complex multi-axis motion
ソフトウェア: GP-Pro EX handles both screen graphics and control logic; one single project file for download
EOL reminder: LT3300 discontinued; new projects use STC6300TA as replacement. Current demand is mostly spare parts and project migration for legacy machines

Unsuitable Scenarios for LT3300

Large conveyor lines, motion control over 10 軸, massive distributed I/O, complex MES interface

Safety PLC / PLd safety level applications (standard I/O does not meet safety rating)

Pro-face All-in-One Controller (HMI+PLC) 機種一覧

注意事項:

K = Sink (sinking / NPN出力, 中国で広く使われている); C = Source (sourcing / PNP出力)

LT3000: 製造中止; STC6000: Current main replacement for LT3000; LT4000M: New modular all-in-one

Unified programming software: GP-Pro EX

LT3000 Series (Legacy All-in-One, 製造中止)

LT3201-A (3.8″ QVGA)

LT3201-A1-D24-K (シンク)

LT3201-A1-D24-C (ソース)

LT3300-T (5.7″ TFT, あなたのターゲットモデル)

LT3300-T1-D24-K (PFXLT3300TADK, シンク)

LT3300-T1-D24-C (PFXLT3300TADC, ソース)

LT3300-S (5.7″ STN Monochrome)

LT3300-S1-D24-K

LT3300-S1-D24-C

LT3300-L (5.7″ TFT Basic Version)

LT3300-L1-D24-K

LT3300-L1-D24-C

LT3301-L (5.7″ TFT, larger logic capacity)

LT3301-L1-D24-K

LT3301-L1-D24-C

LT3000 expansion: EXM I/O / analog modules; optional CANopen master module CA8-CANLT-01

STC6000 Series (Official replacement for LT3000, Active Sales)

5.7″ VGA, built-in 16DI+16DO, supports Schneider TM3 modules

PFXSTC6300TADDKE (シンク / NPN, equivalent to LT3300-T1-D24-K)

PFXSTC6300TADDCE (ソース / PNP, equivalent to LT3300-T1-D24-C)

LT4000M Series (Modular All-in-One, Compact 22mm cutout type)

LT4201TM (3.5″ QVGA)

デジタルタイプ

PFXLM4201TADDK (シンク)

PFXLM4201TADDC (ソース)

アナログタイプ

PFXLM4201TADAK (シンク)

PFXLM4201TADAC (ソース)

LT4301TM (5.7″ QVGA)

デジタルタイプ

PFXLM4301TADDK (シンク)

PFXLM4301TADDC (ソース)

アナログタイプ

PFXLM4301TADAK (シンク)

PFXLM4301TADAC (ソース)

LT4000M Back Expansion Modules

PFXLM4B01DDK / PFXLM4B01DDC (DIO back module)

PFXLM4B01DAK / PFXLM4B01DAC (Analog back module)

Early Legacy LT Series (Very old, GLC derivative)

GLC150 series (LT Type A/B/C/H), only spare part market available, 新しいプロジェクトのためではない:

GLC150-BG41-XY32SK-24V

GLC150-BG41-XY32KF-24V

GLC150-BG41-RSFL-24V

GLC150-BG41-ADK-24V

GLC150-BG41-ADTK-24V

Series Comparison Table

シリーズ	状態	画面	Expansion System
LT3000	製造中止	3.8″/5.7″	EXM Modules
STC6000	Active Sales	5.7″ VGA	TM3 Modules
LT4000M	Active Sales	3.5″/5.7″	LT4000 Back Modules