コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ
Product Profile: 1606-XLE Essential series, single-phase DIN-rail industrial switch-mode power supply, 240W/24VDC. Active production program, manufactured in Czech Republic, 1-年保証.
モデルのデコード
1606-XLE 240 E
1606: Power supply series
XLE: Essential economy-grade base power supply
240: Rated power 240 W
E: 24-28 V DC adjustable output
コアの電気仕様
| アイテム | パラメータ |
| 入力電圧 | AC 100‑240 V single‑phase (90‑264 V wide range); also supports DC 110‑150 V DC input |
| 入力周波数 | 50‑60Hz |
| 出力 | DC 24 V, adjustable range 24‑28 V; factory preset 24.1 V |
| 定格出力 | 240 W / 10 あ (@≤60 °C); 120% short‑term power capacity (12 あ) within 45 °C for dynamic boost |
| Derating Characteristics | Linear derating from 45 °C to 70 °C; full‑rate 10 A not available above 60 °C |
| 効率 | 典型的な 95.2% |
| 力率 | 0.97 |
| Hold‑up Time | 46 ms @ 120 VAC |
| 突入電流 | Built‑in inrush current suppression |
| 保護 | Over‑voltage, 過負荷, 短絡, over‑temperature; auto‑recovery upon fault clearance |
| 信号 | DC‑OK relay dry contact (13‑14), green status LED indicator |
| Parallel Operation | Supports parallel connection for capacity expansion / 冗長性. Parallel mode must be enabled; 1606‑XLPAR current‑sharing module is recommended |
機械式 & 設置仕様
取り付け: 35 mm標準DINレール, 自然対流冷却 (fan-less)
寸法: W60 mm × H124 mm × D117 mm
重さ: 約. 930 g
終了: ネジ端子
保護クラス: IP20 (for cabinet-mount use only)
動作温度: -25 °C ~ +70 °C
設置スペース: Top ≥40 mm, bottom ≥20 mm, left/right ≥5 mm
端子の説明
- Input side: L, N, PE AC input
- Output side: +, 24 VDC output
- DC-OK: 13-14 リレー接点; closed under normal output, connectable to PLC alarm input
Series Suffix Variant Comparison
| モデル | 違い |
| 1606‑XLE240E | Standard screw terminals, グローバルバージョン |
| 1606‑XLE240EC | Push‑in spring terminals |
| 1606‑XLE240EL | Low‑range variant |
| 1606‑XLE240EH | High‑altitude variant |
注記: 1606-XLE240EN is 3-phase 380 V input version, do not confuse.
代替選択
Rockwell Original Upgrade
- 1606-XLS240E: XLS high-performance series, 50% short-term overload capability, higher MTBF, identical power rating and footprint, drop-in replacement with enhanced performance.
3rd-Party Compatible (24 V/10 A/240 W single-phase DIN-rail power supply)
フエニックス・コンタクト: QUINT-PS-1AC-24DC-10
シュナイダーエレクトリック: ABL2RED24050 (240 W)
シーメンス: 6EP1334-2BA10
交換リマインダー: Verify DC-OK alarm contact, parallel-operation capability and temperature derating curve.
典型的なアプリケーションシナリオ
Power supply for CompactLogix PLC, distributed I/O, センサー, valve islands and HMI; control cabinets for production lines, packaging machinery and material-handling equipment; two-unit parallel connection for 24 VDC redundant power supply.
トラブルシューティングのガイドライン
- DC-OK LED off: Check input voltage and internal input fuse; output short-circuit / 過負荷; over-temperature protection triggered by excessive ambient temperature.
- Low output voltage: 過負荷, thermal derating; potentiometer for output adjustment mis-adjusted.
- Parallel operation: Parallel mode switch must be enabled; direct parallel connection without configuration is prohibited.
Customs Reference
Commodity Description: Industrial switch-mode power supply, AC-to-DC conversion, 240 W
HS Code Reference: 8504409990 (Other static converters. Final classification subject to local customs authority.)
ロックウェル 1606-XLE240E Application Scenarios
Product Profile: Economical single-phase DIN-rail 24 V/10 A/240 W industrial switch-mode power supply. Optimized for Rockwell PLC control systems and stand-alone machine cabinets. 特徴 120% short-term overload, DC-OK alarm relay, supports parallel capacity expansion and redundancy. IP20 cabinet-mount design. Not suitable for hazardous explosive areas or direct outdoor installation.
- Control-System Power Supply (主な用途)
- CompactLogix System Control Cabinets
Power supply for 1769-series PLC controllers and local I/O modules; feeds HMI operator panels, safety relays and standard digital/analog I/O modules. Single unit suffices for standard 24 V bus power of small-to-medium PLC systems with I/O and sensor peripherals.
注記: Not intended for ControlLogix backplane power; used exclusively for external 24 V field circuits.
- Distributed I/O Systems
24 V field power for Point-IO and FLEX-IO distributed modules; power supply for proximity sensors, 光電センサー, encoders and solenoid coils of valve islands.
- Equipment Alarm & 監視
The DC-OK dry contact connects to PLC digital input, triggering system alarm and fault logging upon power-supply failure or output dropout.
- OEM Machinery Industry Applications
- 包装機械: 包装機, ラベラー, case sealers. Supplies PLC, touch-screen HMI, センサー, pneumatic valve islands and indicator lamps; preferred single-phase power solution for stand-alone machines.
- Material-Handling Equipment: ベルトコンベア, 仕分けシステム. 24 V control power for distributed I/O, safety light curtains, photoelectric detectors and safety relays.
- Assembly Workstations: Automated assembly stations, robot peripheral cabinets. Power for workstation sensors, solenoid valves and push-button indicators.
- Process Skid Units: Small-scale process skid cabinets and standalone unit equipment. Power for transmitter loops and small controllers under single-phase input conditions.
- 後付け, 交換 & Redundancy Applications
- Legacy Cabinet Retrofit & アップグレード
Drop-in DIN-rail replacement for obsolete 1606-XL series power supplies; cabinet modernization for existing Rockwell equipment.
- Parallel Redundant Power Operation
Two 1606-XLE240E units configured for parallel mode with 1606-XLPAR current-sharing module for load balancing. Continuous output maintained upon single-unit failure, for critical control loops where downtime is costly. Not for safety emergency-stop circuit primary power.
- General Industrial Applications
Stand-alone factory control cabinets, production-line single-unit stations, test fixtures
Plant-wide monitoring cabinets: Power for PLC acquisition modules, instruments and sensors
Food-processing, light-industry and automotive-component manufacturing (non-hazardous general-purpose workshops only)
✘ Non-Recommended Applications
- Main power for high-power equipment with 3-phase mains input. Select 1606-XLE240EN for 3-phase 380 V input requirements.
- Hazardous explosive locations (no Class 1 Div 2 certification; choose XLS series instead).
- Direct outdoor exposure; must be installed inside protective enclosures.
- High-power servo power circuits. Restricted to 24 V logic-level control circuits, not for power-drive loads.
クイックセレクションガイド
✅ Suitable: Total 24 V load ≤10 A; short-term 12 A permissible at 45 °C ambient; single-phase AC 100-240 V supply; Rockwell PLC ecosystem; power-supply fault alarm required; cost-effective genuine OEM solution.
❌ Not Suitable: Continuous load exceeding 10 A; long-term full-load operation at high cabinet temperature; hazardous-area installation; 3-phase incoming mains.
