RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV

RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV.

There are critical differences in software functions, protection level and certifications between the two models. Direct replacement will result in failure to meet the core requirements of the original application.

1. Key Differences Comparison

2. 交換の推奨事項

For a full replacement, select a model with matching functions, protection and certifications. Priority recommendations:

RS20-0800M2T1TDAUWVV (identical model, ensures all specifications match)

If uplink ports need adjustment, choose models in the same series with enhanced management, wide temperature and conformal coating, のような:

RS20-0800S2T1TDAUWVV (single-mode fiber instead of multimode)

RS20-0800M2M2TDAUWVV (dual fiber uplinks)

3. Selection Notes

Before replacement, confirm the mandatory requirements for ring redundancy, hazardous location certification and wide temperature range on site.

If only basic connectivity is required without ring network or hazardous area needs, RS20-0800M2T1SDAUHC may be considered, but network design and environmental compliance must be re-evaluated.

The core attributes of RS20-0800M2T1TDAUWVV are:

8 ポート, Layer 2 enhanced management (TDA), 1 multimode fiber + 1 copper uplink, wide temperature (-40℃), Class I Div 2 approval, WVV conformal coating.

Below is a precise list of alternatives in four categories: direct equivalent, function downgrade, port variant, cross-series upgrade (sorted by recommendation).

1. Direct Equivalent Replacements in the Same Series (1:1, risk-free)
2. Identical Standard Model (First Choice)

RS20-0800M2T1TDAUWVV

注文番号: 943434-365

Matches: TDA enhanced + U wide temp + A hazardous location + WVV coating

2. Similar Specs, Minor Coating/Certification Adjustment (Second Choice)

RS20-0800M2T1TDAUHC

違い: HC dustproof replaces WVV conformal coating; no Class I Div 2 certification

応用: Non-hazardous areas, high dust, moderate humidity

注文番号: 943434-265HC

RS20-0800M2T1TDAU

違い: No WVV coating, no Class I Div 2 certification

応用: General wide-temperature industrial environments

注文番号: 943434-165

2. Port Variant Replacements in the Same Series (Different uplinks, otherwise identical)
3. Dual Copper Uplinks (No Fiber)

RS20-0800T1T1TDAUWVV

Uplink: 2×RJ45 copper ports

注文番号: 943434-375

2. Dual Multimode Fiber Uplinks (No Copper)

RS20-0800M2M2TDAUWVV

Uplink: 2×M2 multimode SC fiber ports

注文番号: 943434-385

3. Single-Mode Fiber (Long Distance)

RS20-0800S2T1TDAUWVV

Uplink: 1×S2 single-mode SC fiber port + 1×T1 copper port

注文番号: 943434-395

3. Function-Downgraded Replacements in the Same Series (Cost/stock compromise)
4. Basic Management (SDA)

RS20-0800M2T1SDAUWVV

Software: SDA Basic (no ring/VLAN/IGMP)

注文番号: 943434-364

2. Standard Temperature (E)

RS20-0800M2T1TDAEWVV

温度: 0~60°C (non-wide temperature)

注文番号: 943434-065WVV

3. Basic Management + Standard Temperature

RS20-0800M2T1SDAEWVV

注文番号: 943434-064WVV

4. Cross-Series Upgrade Replacements (RS20 discontinued/upgrade)
5. RS32 Series (with Gigabit, 推奨)

RS32-0800M2T1TDAUWVV

8×FE + 2×Gigabit SFP, Layer 2 enhanced, wide temp, hazardous location certified, coated

Compatible with RS20 configuration, dimensions and power supply

2. MICE/SPIDER Series (compact/unmanaged)

MS20-0800M2T1TDAUWVV (modular)

SPIDER 8TX/1FX M2 TD AU WVV (unmanaged)

5. Quick Risk Assessment (Critical Items Must Match)

✅ Must match: TDA enhanced, U wide temp, A hazardous location, WVV coating

⚠️ Downgrade risks:

SDA → loss of ring network/VLAN/IGMP

E → not suitable for -40°C environments

No A → prohibited in petrochemical/mining hazardous areas

No WVV → prone to failure in high humidity/corrosive conditions

6. Final Selection Advice
7. 1:1 replacement → RS20-0800M2T1TDAUWVV (943434-365)
8. No explosion protection / high dust → RS20-0800M2T1TDAUHC
9. Long-distance fiber → RS20-0800S2T1TDAUWVV
10. Gigabit upgrade → RS32-0800M2T1TDAUWVV