ifm IS-3002-BPKG Rectangular Inductive Proximity Sensor

(Order designation; core part number: IS5001)

Derivatives of the same series:

IS5035: IS-3002-BPKG/AS (M8 connector version)

IS5068: IS-3002-BPKG/0,3M/AS-610 (0.3m short cable + conector M8)

Specificații de bază

Tip: rectangular inductive proximity sensor, flush mount

Rated sensing distance: 2 mm

Ieșire: 3-fir DC, PNP deschis în mod normal (NU)

Dimensiuni: 27.8 × 10.2 × 16 mm, ultra-thin rectangular housing for confined installation spaces

Date electrice

Tensiune de alimentare: DC 10~30V

Curent fără sarcină: <15 mA

Max. curent de sarcină: 200 mA

Frecvența de comutare: 800 Hz

Căderea de tensiune: ≤2,5 V

Protection features: reverse polarity, short-circuit and overload protection

histerezis: 1～15 % of Sr (distanta nominala de detectare)

Correction factor: steel=1; stainless steel=0.7; brass=0.4; aluminium=0.3; copper=0.2

de mediu & Date mecanice

Gradul de protecție: IP67

Temperatura de functionare: -25 ℃ ～ +80 ℃

Materialul carcasei: PBT

Max. cuplul de strângere: ＜0.5 N·m (use flat washers)

Indicație de stare: yellow LED

Conexiune (standard IS5001): 2 m fixed PVC cable, 3×0,14 mm²

BN (Maro): L+ positive supply

ACEST (Albastru): 0V ground

BK (Negru): Ieșire semnal PNP

Key Application Keywords

Jig positioning, cylinder end-position detection, conveyor line counting, machine tool limit monitoring, metal detection in narrow spaces, material handling position feedback, signal acquisition for automated machinery

Selecţie & Note de înlocuire

Suffix definition: no suffix = 2m fixed cable; `/AS` = M8 3-pin straight connector; `/0,3M` = short lead
Domestic equivalent replacement: rectangular inductive proximity sensor with identical size, 2mm flush-shielded, PNP NO ieșire
Installation note: flush mount; sensing face can be embedded into metal brackets without reduction of rated sensing distance.

Ghid de depanare

Fără ieșire: first check 24V power supply and polarity; verify no reverse wiring

Semnal instabil: check voltage drop, gap between sensor and metal target, nearby strong magnetic interference and mounting clearance

LED does not light up: missing power supply or internal short circuit

NPN Version with Identical Mechanical Outline (IS Series, 27.8×10.2×16, flush 2mm, 3-fir DC)

Remarcă: IS series is originally PNP dominant; NPN models carry suffix BOKG

IS5002: IS-3002-BOKG, NPN normally open, 2m cablu PVC; fully interchangeable with IS5001 with identical mounting holes

IS5036: IS-3002-BOKG/AS, NPN NR, M8 3-pin straight connector (counterpart of IS5035)

IS5069: IS-3002-BOKG/0,3M/AS-610, 0.3m short cable + conector M8 (counterpart of IS5068)

Cablaj: BN=L+, BU=0V, BK=NPN output; supply 10~30V DC. All other parameters (frecventa de comutare, interval de temperatură, IP67, protecţie) match IS5001 completely.

III. Domestic Replacement List (Recomandat, pin-to-pin compatible, 2mm flush-shielded)

Selection criteria: 27.8×10.2×16 outline, flush shielded, 2mm distanta de detectare, DC10–30V, IP67, switching frequency ≥800Hz

Sodron SN08Y-02BPA (PNP NR) / SN08Y-02BNA (NPN NR)

On-site Installation Guidelines

Cuplul de strângere

Carcasă din plastic PBT; tightening torque must be below 0.5 N·m to prevent cracking; use thin flat washers to disperse clamping force.

Dirijarea cablurilor & cablare

Standard 2m PVC cable (3×0,14 mm²);

Brown = +24V, Blue = 0V, Black = PNP signal;

Avoid routing alongside power cables and servo motor wires to prevent EMI interference. Use shielded cable or signal filters for long-distance wiring.

Scurtcircuit încorporat & protectie inversa polaritatii; avoid hot-plugging under power.

Environmental suitability

Clasament IP67; resistant to cutting fluid, cooling water and dust. Not suitable for continuous immersion or strong corrosive solvents (acetone, strong acid/alkali).

Ambient temperature range: -25～+80 ℃; add heat insulation if installed near heating blocks or injection mould slides.

Gap adjustment

Recommended working gap: 0.5～1.2 mm (leave safety margin). Do not operate continuously at the maximum 2mm gap; vibration will cause signal dropout.

Yellow LED lights up when metal is detected; use the LED for quick commissioning.

Switching frequency limit

Frecvența nominală: 800 Hz (max 800 pulses per second). For field application, limit the frequency to ≤400 Hz. Not recommended for high-speed pulse counting or high-frequency vibration detection.

Important Limitation

This is a standard position sensor, NOT a safety-rated device. Do not connect it to safety circuits, safety gates or emergency stop protection loops.

Only detects ferrous/non-ferrous metals; no response to plastic, film or wood.

Tabel de comparație: IS5001 Ultra-Thin Rectangular vs Standard Cylindrical Proximity Sensors

Articol	IS5001 IS-3002-BPKG Ultra-Thin Rectangular	Standard M8/M12 Cylindrical Inductive Sensor (de ex. ifm IE5001)
Dimensiuni	27.8×10.2×16 mm, ultra-flat	Cylindrical M8/M12/M18; requires radial installation space
Montare	Flush shielded; fits narrow slots, cylinder side faces and gripper gaps	Culoare / non-flush options; threaded body requires radial clearance
Distanța de detectare	Fix 2 mm	M8:1.5~2 mm; M12:4 mm; M18:8 mm; multiple range options
Frecvența de comutare	800 Hz	M8 typically 2000 Hz; M12 approx 1000 Hz; wider high-frequency options
Metoda de fixare	Side-mounted with screws	Threaded screw-in + lock nut; faster installation
Avantaje	Ultra-thin body, ideal for space-critical locations; flush mounting prevents collision damage	Wide model range, flexible sensing distances, universal spare parts, fast commissioning, broad price options
Dezavantaje	Long body despite thin thickness; short 2mm sensing range; higher price than M8 types	Radial protrusion; prone to collision on slim cylinders and compact grippers
Aplicații tipice	Slim cylinders, finger grippers, narrow-slot jigs, small tool magazine positions	General limit detection, numărarea transportoarelor, machinery with ample mounting space
Protecţie	IP67	Mostly IP67
Ieșire	PNP NR (NPN version IS5002 available with same outline)	PNP/NPN, NU/NC; full output options
Side Metal Immunity	Flush-shielded (can be embedded in metal brackets); keep ≥5mm clearance from side metal	Flush types can be embedded; non-flush types require large metal clearance