Modul de sursă de alimentare PLC Mitsubishi A1S63P

Definirea segmentului de model

Poziționarea de bază: Provides stable DC5V/5A system power for AnS series PLCs. It is dedicated to the base power slot and supplies power to the CPU and I/O modules via the base bus.

2. Tabelul parametrilor specificațiilor de bază

3. Lista de accesorii & Ghid de instalare

3.1 Accesorii standard

Module body ×1

Installation manual ×1

Terminal label sticker ×1

Fixing buckle ×2 (for base locking)

3.2 Precauții de instalare

1. Position Requirement: Must be installed in the dedicated power slot on the far left of the A-series base unit; do not insert into I/O slots.
2. Specificații de cablare:

Putere de intrare: L+ (DC24V+), L(DC24V-), connect to external DC24V power supply.

Base Power Supply: Automatically connected via gold fingers at the module bottom, no additional wiring required.

3. Proiectare redundanță: Dual power redundancy is not supported. For redundant power supply, select models such as Q-series Q63RP.
4. Spațiu de disipare a căldurii: Reserve ≥50mm clearance above the module to avoid direct contact with heat-generating components.
5. Competitor Replacement / Comparație între mărci

4.1 Mitsubishi Same-series Replacement Models

4.2 Cross-brand Replacement Solutions

5. Ghid de selecție & Soluții de înlocuire

5.1 Core Selection Criteria

✅ Input Power Matching: Confirm on-site DC24V power supply with fluctuation ≤±30%.

✅ Load Calculation:

Single module max load: 5A DC5V

Recommend 20% marja rezervata (actual load ≤4A) to prevent frequent overcurrent protection triggering.

Calculation Example: CPU (0.8O) + 8-slot I/O (0.3A per slot) = 3.2A, meets requirement.

✅ System Expandability: If expansion to more than 8 slots is needed in the future, choose A1S61PN (8A output).

✅ Environmental Adaptation: Ensure operating temperature ≤55℃ and humidity within industrial standard range.

5.2 Upgrade & Replacement Routes

Scheme A: Same-series Upgrade (Lowest Cost)

Load increase: A1S63P → A1S61PN (Intrare AC, 8A output)

Battery backup required: A1S63P → A1S63P-BAT (version with battery interface)

Scheme B: A-series to Q-series Upgrade (Performance Improvement)

1. Modul de putere: A1S63P → Q63P (DC24V input, 5A output)
2. Base Adaptation: Adopt QA extension base (de ex. QA65B), original A-series I/O modules can be retained.
3. Avantaje: Improved system stability, supports more I/O expansion, compatible with Q-series high-speed modules.

Scheme C: Full Upgrade to iQ-R Series (Future-oriented)

Modul de putere: A1S63P → R63P (DC24V input, 5A output)

Adaptation Method: Use conversion adapter to replace old modules gradually.

Avantaje: Supports Ethernet / CC-Link IE Field Network, enhances data processing capability and system integration.

5.3 Depanare comună

A1S63P este o intrare dedicată DC24V / Modul de alimentare cu ieșire DC5V 5A pentru PLC-urile din seria Mitsubishi AnS. Cu structură compactă și performanță stabilă, este ideal pentru sistemele de automatizare mici si mijlocii.

În timpul selecției, focus on input power type, load capacity and system expandability. For upgrade, choose high-power models in the same series or migrate to Q-series / iQ-R series via adapted base units to achieve system performance enhancement.

Complete Model List of Mitsubishi AnS Series PLC (Structured Classification)

1. Quick Overview of Model Naming Rules

2. Module CPU (Core Control Unit)

3. Module de alimentare (System Power Core)

4. Base Units (Module Mounting Carrier)

5. Digital I/O Modules (Discrete Control)

5.1 Input Modules (A1SX Series)

5.2 Output Modules (A1SY Series)

6. Analog I/O Modules (Controlul procesului)

6.1 Module de intrare analogice (A1S68AD Series)

6.2 Module de ieșire analogică (A1S62DA Series)

6.3 Temperature Input Modules (A1S68TD Series)

7. Special Function Modules (Advanced Control)

7.1 Poziționare / Module de control al mișcării (A1SD Series)

7.2 High-speed Counter Modules (A1SD62 Series)

7.3 Other Special Modules

8. Network Communication Modules (Data Interaction)

8.1 Serial Communication Modules (A1SJ71C Series)

8.2 Ethernet Modules (A1SJ71E Series)

8.3 Fieldbus Modules

9. Note suplimentare

9.1 Poziționarea în serie

AnS Series: Compact modular PLC, positioned between FX series (mic) and Q series (mare), suitable for small and medium-sized control systems.

Compatibilitate: AnS modules can be adapted to Q-series PLC via QA extension base units for system upgrade.

9.2 Discontinuation & Informații de înlocuire

The AnS series was fully discontinued in September 2014.

Officially recommended replacement series: iQ-R Series (High performance), Seria Q (Mediu), L Series (Compact).

9.3 Puncte cheie ale selecției

CPU Selection: Choose according to program capacity, I/O points and processing speed.

Calculul puterii: Ensure total DC5V current consumption ≤ 80% of the power module rated value.

Capacitate de expansiune: Max support 11-slot base unit, extensibil până la 2048 I/O points.