Schneider Electric EA9RN2C1030C

2-Pole Type A Întrerupător acționat cu curent rezidual (RCBO) from the Easy9 series, factory-assembled integrated design, asigurand protectie tripla impotriva suprasarcinii, scurtcircuit și scurgere la pământ

Parametri cheie: Rated current 10A, C-curve tripping characteristic (5–10×In), rated residual operating current 30mA, capacitate de rupere 6kA, rated voltage 230/400V AC

Aplicații: Low-voltage final distribution in residential and commercial buildings; especially suitable for loads sensitive to pulsating DC earth leakage (de ex., echipamente electronice, sisteme de iluminat)

Certificari & Mediu: Respectă GB 16917 / IEC 601009, CCC certified, Produs Green Premium, meets RoHS / REACH requirements

1. Model Number Breakdown

2. Complete Technical Data

3. Caracteristici cheie & Beneficii
4. Type A earth leakage protection: Compared with Type AC, detects pulsating DC leakage, ideal for modern electronic loads
5. Factory-preassembled design: Breaker and leakage module assembled at factory to avoid on-site misassembly hazards
6. Eficient din punct de vedere al costurilor: Easy9 series optimized for residential / commercial final distribution, echilibrând performanța și costul
7. Sigur și de încredere: Complies with international and national standards; 6kA breaking capacity handles common short-circuit faults
8. Eco-certified: Green Premium product compliant with major global environmental regulations
9. Aplicații & Installation Recommendations

Aplicații tipice:

Protection for residential lighting and socket circuits

Power distribution in small commercial buildings

Power supply for leakage-sensitive electronic equipment

Final distribution in offices, shops and similar premises

Note de instalare:

Mount on standard 35mm DIN rail

Ensure load current does not exceed rated 10A

Suitable for TT, TN-S, TN-C-S earthing systems

Use appropriate cable cross-section (recommended ≥1.5mm² copper conductor)

5. Modele alternative & Informații de comandă

Full factory model: EA9RN2C1030CA (versiune standard)

Same-series alternatives:

1P+N version: EA9RN1C1030C

3P / 4P versions: EA9RN3C1030C / EA9RN4C1030C

Different ratings: EA9RN2C1630C (16O), EA9RN2C2030C (20O), etc.

Chinese brand equivalents: CHINT NXBLE-32 2P C10 30mA; DELIXI DZ47LE-32 2P C10 30mA

6. Selecţie & Avertismente de siguranță
7. 30mA residual protection is intended for personal shock protection, not equipment protection (higher IΔn required)
8. C-curve suits general loads; for motors and inductive loads, D-curve devices are recommended
9. Test the earth leakage function regularly after installation (using the test button)
10. Interval de temperatură de funcționare: -25°C până la +60°C; avoid installation in extreme environments

International Brand Equivalents & Full EA9RN Series List

Below are international brand replacements and full series order codes for EA9RN2C1030C (2P C10A 30mA Type A RCBO) for substitution and inventory management.

1. International Brand Cross-Reference

2. Full Schneider EA9RN Series Model List (Standard Order Codes)

EA9RN series are factory-integrated RCBOs in the Easy9 range, with combinations of poles (1P+N / 2P / 3P / 4P), curba C, curent nominal (6A–63A), residual current (30mA / 100mA), Tip A.

1P+N

2P

3P

4P

3. Note speciale de model
4. K variant: With overvoltage protection, suffix “K”, de ex., EA9RN2C1030CK
5. Type AC vs Type A:

Tip AC: Detects only AC earth leakage, marked AC or unmarked

Tip A: Detects AC + pulsating DC leakage, marked A or CA

3. Ambalare: Standard 2 buc/cutie, 12 buc/cutie (1 pc/box for some high-current models)
4. Substitution Selection Guidelines
5. Confirm leakage type: EA9RN2C1030C is Type A; prefer Type A replacements, avoid Type AC (especially for electronic loads)
6. Verify breaking capacity: Original is 6kA; replacement should meet or exceed this value
7. Match poles and tripping curve: 2P, curba C (5–10×In)
8. Check mounting dimensions: All fit 35mm DIN rail, occupy 2 module

Applications of Schneider EA9RN2C1030C

The EA9RN2C1030C is a 2P, C10A, 30mA, Type A integrated earth-leakage circuit breaker designed for residential and commercial final distribution, primarily for personal electric shock protection + overload and short-circuit protection for low-power circuits.

1. Rezidențial (Cele mai comune)
2. General lighting circuits

Camera de zi, bedroom, study, corridor, balcony lighting for LED panels, downlights, ceiling lights; 10A is fully sufficient.

2. Low-power socket circuits

Bedside sockets, study sockets, living room auxiliary sockets for table lamps, phone/laptop chargers, fani, routere.

3. Small loads in wet areas

Bathroom lighting / ventilation fans, small kitchen appliances (mini rice cookers, eggbeaters, kettles); 30mA provides effective shock protection.

4. Old residential wiring upgrades

Upgrading existing 10A legacy circuits with modern RCBOs for improved safety.

2. Office & Small Commercial
3. Workstation power

Individual desks: PCs, monitoare, imprimante, scanners and other light office equipment.

2. Shop lighting

Main lighting in convenience stores, stationery shops, nail salons, milk tea shops.

3. Low-voltage equipment power

CCTV cameras, card readers, small switches, wireless APs.

4. Public area lighting

Corridors, stairwells, building lobbies, partial underground garage lighting.

3. Light Industrial & Auxiliary Engineering
4. Control circuit power

Control supplies for small fans, pompe, automation systems.

2. Temporary power

Construction site dorm lighting, exhibition and event temporary low-voltage distribution.

3. Small branch circuits in distribution boards

Final sub-circuit protection with combined overload, short-circuit and earth-leakage functions.

4. Special Applications for Type A Leakage Protection

This device supports Type A earth leakage detection of pulsating DC components, making it superior to standard Type AC for:

LED lighting and electronically ballasted lighting circuits

Switching power supplies, adapters, small variable-frequency devices

Damp environments requiring high sensitivity and reliability

Unsuitable Applications (Important)

High-power loads such as air conditioners, încălzitoare electrice de apă, plite cu inducție, cuptoare, încălzitoare instantanee de apă (easily exceed 10A)

Heavy industrial motors and large machinery

Main circuits requiring 100mA / 300mA equipment-level earth leakage protection