Schneider MT08N1 3P 800A

Schneider MT08N1 3P 800A is a fixed 3-pole intelligent întrerupător de circuit de aer (ACB) belonging to the Masterpact MT series. It has a frame current and rated current of 800A, with an N1-class breaking capacity (50kA@400V). Suitable for incoming line/bus tie protection and power distribution in power distribution systems, it is commonly used in primary/secondary power distribution of industrial plants, large buildings and data centers. Below are the complete specifications and core details:

Parametrii tehnici de bază

Funcții de bază & Caracteristici de protecție

1. Full Intelligent Protection: Realizes long-time delay (suprasarcina), întârziere de scurtă durată (scurt-circuit), instantaneu (heavy short circuit) and earth fault protection via the Micrologic control unit. Parameters can be precisely set to adapt to cascade coordination in multi-level power distribution systems.
2. Măsurare & Monitorizare: Displays real-time electrical parameters such as current, voltage and power, with fault memory and alarm output functions. Supports Modbus and other communication protocols, and can be integrated into SCADA systems.
3. Design zero arc: Optimized arc extinguishing chamber with zero arcing distance, improving cabinet safety and space utilization.
4. Funcția de izolare: Conform IEC 60947-2, can be used as an isolating switch (without controller).

Scenarii de aplicare & Puncte cheie ale selecției

– Scenarii tipice: Primary/secondary power distribution links such as incoming line cabinets of industrial plants, power distribution of large buildings, UPS output of data centers, photovoltaic/energy storage combiner boxes, etc. It is used for power distribution and short-circuit, suprasarcina, earth fault protection of lines/equipment.

– Key Selection Tips:

– Unitatea de control: 2.0 for basic protection; 5.0/6.0 with added measurement and communication functions, select according to requirements.

– Tip de montare: Fixed type is cost-effective; drawout type facilitates maintenance and allows breaker replacement without power outage.

– Capacitate de rupere: N1 (50cel) meets general power distribution needs; upgrade to N2/H1/H2 class if short-circuit current is high.

Procurement & Recomandări de înlocuire

1. Complete Order Specification: Must specify MT08N1 + control unit model + mounting method + numărul de pol, de ex., MT08N1 F MIC 2.0 3P.
2. Compatibilitate de înlocuire: Can directly replace MT08N2/H1 and other models with the same frame size. Dimensions differ from the NW series; verify cabinet installation space before replacement.
3. Preț de referință (December 2025): Domestic fixed type with MIC 2.0 control unit is approximately RMB 14,500-16,000 pe unitate; drawout type is priced higher.

Breaking Capacity Comparison Table of Schneider Masterpact MT08 Series (800O)

Complete Order Code Examples & Stocking Recommendations

1. Complete Order Code Specification (4 Core Elements Required)

Ordering Schneider MT series requires specifying frame size + breaking capacity class + mounting method + unitate de control + numărul de pol. Examples are as follows:

– MT08N1 F MIC 2.0 3P: 800A N1 class, fixed type, Micrologic 2.0 unitate de control, 3-pol

– MT08H1 D MIC 5.0 4P: 800A H1 class, drawout type, Micrologic 5.0 unitate de control, 4-pol

2. Stocking & Recomandări de selecție
3. Select by Short-circuit Current

– First calculate the expected short-circuit current at the distribution point: choose N1 class (highest cost-performance) if ≤50kA; N2 class if 50-70kA; H1/H2 class if >70cel.

– For industrial plants close to substations with high short-circuit current, prioritize H1 class.

2. Select by Operation & Cerințe de întreținere

– Choose fixed type for general power distribution scenarios, featuring low cost and small space occupation;

– Choose drawout type for scenarios where power outage for maintenance is not allowed (de ex., centre de date, spitale), enabling live replacement of the breaker body.

3. Select by Functional Requirements

4. Stocking Recommendations

– For regular trade stocking, prioritize MT08N1 F MIC 2.0 3P, which adapts to 80% of general power distribution scenarios and ensures fast inventory turnover;

– For heavy industry customers, stock a small quantity of MT08H1 F MIC 5.0 3P to meet high short-circuit current requirements;

– Customize drawout models on demand; large-scale stocking is not recommended (high capital occupation and strong model specificity).

Tabel de comparație a parametrilor de bază: Schneider MT08 Series vs. Chint NA8G-800 Series

(Both are 800A frame, 3-pol, fixed type, basic protection type, suitable for general power distribution scenarios)

Selection Decision Recommendations

1. Scenarios for Prioritizing Schneider MT08 Series

– Export projects (de ex., overseas markets such as Algeria), power distribution projects requiring international certifications;

– Scenarios with high requirements for short-circuit breaking capacity and reliability, such as data centers and heavy industrial plants;

– Intelligent power distribution systems requiring energy consumption monitoring and remote control.

2. Scenarios for Prioritizing Chint NA8G-800 Series

– Domestic civil buildings, small and medium-sized factories and other general power distribution scenarios with limited budgets;

– Localized renovation projects requiring fast delivery and after-sales response;

– Power distribution circuits with only basic short-circuit and overload protection needs, no intelligence requirements.

3. Replacement Compatibility Notes

– The two series have slightly different mounting dimensions; verify cabinet installation space before replacement;

– Chint NA8G series can upgrade measurement and control functions by installing intelligent trip units (de ex., NA8G-M), with the cost still lower than that of similarly configured Schneider models.