FBs-40MCR2-AC Основной блок ПЛК Fatek

Пояснение кода модели

Сегмент кода	Описание
FBs	Prefix for standard Fatek PLC ряд
40	Всего точек ввода-вывода: 40 (24 входы + 16 результаты)
MC	High-performance main unit, different from MA/MB economy type and MN high-speed NC type
Р	Тип выхода: Релейный выход. Large contact capacity, suitable for AC and DC loads
2	Mark for 2nd generation upgraded version
переменного тока	Источник питания: Wide voltage range 100~240VAC

Основные характеристики

Категория	Подробные характеристики
Конфигурация ввода/вывода	24-channel 24VDC digital inputs, 16-channel relay outputs
High-speed Inputs	6 channels @ 200KHz high-speed counting + 2 channels @ 20KHz medium-speed counting + 16 general inputs
High-speed Outputs	Relay outputs do not support high-speed pulse. Only transistor models (T/J) provide 6 channels @ 200KHz + 2 channels @ 20KHz
Коммуникационные порты	Встроенный 1 integrated RS232/USB port (Port0), расширяемый до 5 communication ports in total
Program Memory	8КБ (стандартный), expandable to 16KB
Память данных	4КБ (стандартный), expandable to 8KB
High-speed Counter	4 groups of Hardware High-speed Counters (HHSC), Макс. 200KHz; 4 groups of Software High-speed Counters (SHSC), Макс. 5KHz
Таймеры	0.1ms high-precision high-speed timers, supporting multiple timing modes
Instruction Set	Над 300 instructions, supporting multi-input & multi-output structures for high programming efficiency
Источник питания	100~240VAC, 50/60Гц, потребляемая мощность ок.. 15Вт
Операционная среда	Температура: -20~75°С; Влажность: 10~90%RH (неконденсирующийся)
Размеры	Standard DIN rail mounting, приблизительно. 100×100×75mm (refer to official data for exact size)
Сертификаты	CE, UL certified, соответствует стандартам промышленной безопасности

Cross-brand Equivalent Comparison

Бренд	Эквивалентная модель	Основные различия
Сименс	S7-200 SMART SR40	FBs-40MCR2-AC features higher high-speed counting frequency (200KHz vs 100KHz) and a more streamlined instruction set
Мицубиси	FX3U-40MR/ES-A	Fatek has built-in USB + RS232 dual ports (Mitsubishi requires extra expansion); Fatek delivers better high-speed counting performance
Омрон	CP1E-N40DR-A	Larger program memory (8KB vs 6KB); stronger communication expansion capability (Макс. 5 порты)
Шнайдер Электрик	M221C40R	More cost-effective; superior high-speed counting and pulse output performance

Full Model List of FBs-MC Series

Модель	I/O Points	Тип выхода	Источник питания	Ключевые особенности
FBs-10MCR2-AC	10 (6IN/4OUT)	Реле	переменного тока	Economy compact type, non-expandable
FBs-14MCR2-AC	14 (8IN/6OUT)	Реле	переменного тока	Economy compact type, non-expandable
FBs-20MCR2-AC	20 (12IN/8OUT)	Реле	переменного тока	Basic functional type, расширяемый
FBs-24MCR2-AC	24 (14IN/10OUT)	Реле	переменного тока	Basic functional type, расширяемый
FBs-32MCR2-AC	32 (16IN/16OUT)	Реле	переменного тока	High-performance type with built-in high-speed counting
FBs-40MCR2-AC	40 (24IN/16OUT)	Реле	переменного тока	High-performance type, 6 channels 200KHz high-speed inputs
FBs-60MCR2-AC	60 (36IN/24OUT)	Реле	переменного тока	High-performance type with large I/O capacity
FBs-40MCT2-AC	40 (24IN/16OUT)	Транзистор (НПН)	переменного тока	High-performance type, 6 channels 200KHz high-speed outputs
FBs-40MCJ2-AC	40 (24IN/16OUT)	Транзистор (ПНП)	переменного тока	High-performance type with PNP output
FBs-40MCR2-D24	40 (24IN/16OUT)	Реле	24 В постоянного тока	DC powered version

Распространенные неисправности & Поиск неисправностей

Явление неисправности	Возможные причины	Действия по устранению неполадок
Power indicator off	Damaged power cable, faulty power module, abnormal input voltage	1. Check power cable and socket
		2. Verify input voltage within 100~240VAC
		3. Inspect bulging capacitors on power module
		4. Replace power module for test
No response at input points	Неправильная проводка, defective sensor, faulty PLC input module	1. Check sensor power and wiring
		2. Измерьте входное напряжение (nominal 24VDC) with multimeter
		3. Replace sensor for test
		4. Check PLC input indicators
No action at output points	Неправильная проводка, faulty load, damaged relay contacts	1. Check load power and wiring
		2. Measure output terminal voltage
		3. Replace load for test
		4. Check PLC output indicators
		5. Replace relay module (если применимо)
Communication failure	Несовпадающие параметры связи, faulty cable, damaged port	1. Check baud rate, data bits and parity bits
		2. Inspect cable connection and shielding
		3. Replace communication cable
		4. Check communication indicators
		5. Try alternative communication ports
Program loss	Low battery voltage, incomplete program saving, memory failure	1. Check battery voltage (≥3V required)
		2. Re-download program and save to EEPROM
		3. Replace battery
		4. Inspect memory module

Приложение & Отраслевые случаи

Применимые сценарии

Packaging Machinery: Control conveyors, cutting, labeling and other actions; realize precise counting and positioning via high-speed counting function
Текстильное оборудование: Control looms and knitting machines; support multi-axis synchronous operation
Food Processing: Manage filling, sealing and sterilization processes; execute scheduled tasks via built-in calendar
Machine Tool Control: Control spindle and feed of small machine tools for basic positioning
Автоматизация зданий: Regulate air conditioning, lighting and elevators; realize centralized monitoring via communication ports

Not Recommended Scenarios

High-precision high-speed positioning: Applications requiring pulse output over 200KHz (MN series recommended)
High-power load control: Single output load exceeding relay rated capacity (typically 2A/250VAC)
Severe electromagnetic interference: Environments without proper shielding, which may affect normal operation
Extreme temperature: Operating temperature beyond -20~75°C

Типичные случаи применения

Случай 1: Automatic Packaging Line Control System

Equipment: Automatic packaging machine, конвейер, labeler

Функции: Product counting, fixed-length film cutting, labeling position control, сигнализация неисправности

Highlights: Precise counting via 6-channel 200KHz high-speed inputs; HMI interaction via RS232 communication; scheduled production with built-in calendar

Случай 2: Small Wastewater Treatment System

Equipment: Водяные насосы, valves, level sensors, pH sensors

Функции: Automatic pump start/stop based on liquid level; automatic chemical dosing according to pH value; automatic standby switch upon fault

Highlights: High-power pumps and valves controlled by relay outputs; data transmission to host computer via communication expansion modules; periodic backwashing via built-in timers

Рекомендации по выбору & Quick Reference Rules
Selection Tips: Match I/O points to demands; select output type by load (relay for AC/DC universal use, transistor for high-speed pulse); choose power supply per on-site condition; select series by functions (MC: high-performance, MA: экономика, MN: high-speed positioning)
Quick Rules: