ВЕЧЕРИНКА 161416 Solenoid Valve

Basic Model Information

Заказ №.: 161416

Full Model Code: КПВ10-М1Н-2Х3-ГЛС-М7

Тип продукта: CPV10 Series Twin 3/2-way Monostable Single Solenoid Valve (Valve Terminal Specific Valve Slice)

Разбивка кода модели

2. Core Pneumatic Parameters
3. Valve Function: 2×3/2 normally closed, monostable (return upon power cut-off)
4. Nominal Orifice: 4 мм
5. Standard Flow C-value: 1.6 l/s·bar, b=0.4
6. Operating Pressure: -0.9 ~ 10 бар (vacuum ~ 1 MPa)
7. Pilot Pressure: 3 ~ 8 бар (0.3 ~ 0.8 MPa)
8. Switching Time: 17 ms energized / 25 ms de-energized
9. Port Specification: Working ports 2/4 = M7; порты 1/11/3/5 share integrated manifold channels on valve terminal base
10. Unidirectional flow, positive overlap spool design
11. Электрический Параметры

Потребляемая мощность катушки: 0.46 Вт (with energy-saving holding current, 100% continuous energization permitted)

Электрический интерфейс: Unified power supply via integrated bus / multi-pin base of CPV10 valve terminal

Pulse Withstand Test: 1400 μs positive pulse, 700 μs negative pulse (anti-false triggering)

4. Относящийся к окружающей среде & Material Specifications

Середина: Compressed air complying with ISO 8573-1 [7:4:4], long-term operation with or without lubrication

Температура окружающей среды: -20℃ ~ +80 ℃

Seals: NBR/HNBR; Valve body: die-cast aluminum, жилье: PPS plastic

Согласие: РоХС, CRC2 medium corrosion resistance, low copper-zinc LABS leaching (suitable for lithium battery & food production lines)

Масса: 70 g per slice

Монтаж: Through-hole locking installation on valve terminal, standalone discrete use prohibited

5. Pneumatic Port Definition

1/11: Common supply air (central air supply via valve terminal base)

2, 4: Two independent outlets with external M7 threads

3/5: Two exhaust ports, centralized manifold exhaust via base

12/14, 82/84: Shared channels for pilot supply / pilot exhaust

6. Distinction of Similar Models in Same Series (Справочник по выбору)

7. Типичные сценарии применения
8. Independent dual-circuit control of small cylinders (single slice controls 2 micro cylinders)
9. Micro clamping, air blowing dust removal & vacuum adsorption for 3C electronics and lithium battery equipment
10. Compact valve terminal modules for small material sorting, positioning and air blowing on packaging machinery
11. Compact valve terminals for laboratory and miniature automated test equipment
12. Установка & Ключевые моменты технического обслуживания
13. Only compatible with CPV10 10 mm width valve terminal bases; CPV14/CPV18 series cannot be mixed
14. Air supply must be fitted with 5 μm precision filter to prevent spool jamming by dust
15. FKM seals are recommended to replace NBR for long-term vacuum operating conditions (custom version)
16. Damaged single valve slices can be replaced individually without exchanging the entire valve terminal assembly
17. Replacement Instructions

Прямая замена: No universal interchangeable valve slices available; только 161414/161415 with identical function can be substituted (only port threads differ, matching fittings required)

Замена обновления: New generation CPV10-VI series valve slices, fully compatible mounting dimensions with 20% higher flow rate

Complete Supporting Information for ВЕЧЕРИНКА 161416 (КПВ10-М1Н-2Х3-ГЛС-М7): Matching Bases, Электропроводка & M7 Fittings

1. Valve Electrical Wiring Logic (Стандартный 24 В постоянного тока, 0.46 W Low-Power Coil)

1.1 Valve Slice Coil Definition (2 independent coils per slice)

Модель 161416 is a twin 3-way valve, с 2 independent solenoid valves integrated in one slice:

Катушка 1: Controls outlet port 2 (М7)

Катушка 2: Controls outlet port 4 (М7)

Напряжение: Standard DC24 V, non-polarized coils (no positive/negative differentiation)

Потребляемая мощность: 0.46 Вт, built-in energy-saving holding current, поддерживает 100% continuous energization under full load

Класс защиты: IP65, unified power supply via valve terminal base; no separate wiring terminals

1.2 Three Main Wiring Schemes for Valve Terminal Bases

Схема 1: Multi-pin Direct Connection Base (CPV10-GE-DN Series, Direct PLC Relay Output Connection)

Applicable Models: CPV10-GE-DN3-4/8/12 (4/8/12 valve positions, G1/8 air supply port)

Интерфейс: M12 12-pin male connector, 24 V DC main power supply

Pin Assignment:

1–10: Solenoid valve output signals (2 points per valve; one 161416 slice occupies 2 output points)

11: Common positive 24 В+

12: Common negative 0 V GND

Электропроводка: External KMYZ series cables plug directly into base; no terminal splitting required

Схема 2: Bus-Type Base (Profinet/DP/DeviceNet/CC-Link, Recommended for Automated Production Lines)

General Base Model: CPV10-GE-DI01-8 (8-position bus interface)

Коммуникационный порт: 9-pin Sub-D Profibus DP, IP65 bus plug FBS-SUB-9-GS-DP-B

Источник питания: Independent 24 V power terminals; bus signals separated from power supply

Address Mapping: Each 161416 slice occupies 2 bus output channels; bus program directly maps outputs to ports 2/4

Схема 3: Compact AS-i Bus Base (Small Standalone Machines, Miniature 3C Equipment)

CPV10-GE-ASI-4, exclusively for CPV10 series, 4 valve positions, ultra-simplified wiring, ideal for equipment with limited I/O points

1.3 Ручной тест & Запреты на проводку

Blue manual override push button on valve slice side: two modes (self-latching / momentary jog), enables commissioning without power supply

Forbidden Operations: Directly feed voltage above 30 V to coils, mix AC and DC power, permanent short-circuit of positive/negative poles

Coil Withstand Voltage: Tolerates 1400 μs short pulses; freewheeling diodes required for long cables to prevent PLC output breakdown

2. Full Compatible CPV10 Valve Terminal Base Models (Только 10 mm Width Terminals Supported; CPV14/18 Incompatible)

2.1 Standard Multi-pin Bases (Widely Used for Mass-Production Machinery)

2.2 Bus Communication Bases (Mainstream Automation Solutions)

Профибус ДП: CPV10-GE-DI01-8

Profinet Ethernet: CPV10-GE-PN-8

Девайснет: CPV10-GE-DN-8

CC-Link: CPV10-GE-CC-8

2. Mandatory Auxiliary Accessories for Valve Terminals
3. End Cover: CPV10-END (левый & right sealing plates to seal air supply channels)
4. Blank Plate: CPV10-BL (seal vacant valve positions to prevent air leakage)
5. Separator Plate: CPV10-SP (separate high/low pressure air supply circuits)
6. Multi-pin Plug-in Cable: KMYZ-7-24-4LED (4 m with LED status indicators)
7. Matching Push-in Fittings for M7 External Threads (Порты 2/4 из 161416 are M7 External Threads)

Straight Fittings (Linear Air Outlet)

1. QSM-M7-4-I Order No.153319: Fits 4 mm OD PU tubing (first choice matching valve nominal orifice)
2. QSM-M7-6-I Order No.132919: Fits 6 mm OD tubing for high-flow air blowing

L-Type Elbow Fittings (Limited Installation Space)

1. QSML-M7-4-I: 4 mm tubing right-angle elbow
2. QSML-M7-6-I Order No.186353: Standard elbow for 6 mm tubing
3. QSMLLV-M7-6-I: Extended L elbow to avoid valve body interference

Extended Right-Angle & Flow Control Fittings (With Speed Regulation)

QSMLR-M7-4: M7 external thread L-type one-way flow control valve for precise cylinder speed adjustment

QSMT-M7-4: T-type tee splitter for driving two micro cylinders from one supply

Installation Torque Specification

Standard tightening torque for M7 threaded fittings: 2.2 Н·м; over-tightening will strip M7 threads on valve body

4. Pneumatic Channel Definition (Integrated Shared Channels on Base; No Separate Tubing Required)
5. 1/11: Main supply air (central G1/8 air supply on base)
6. 2: First M7 output (air outlet when Coil 1 energized)
7. 4: Second M7 output (air outlet when Coil 2 energized)
8. 3/5: Shared exhaust for two circuits (manifold exhaust via base; silencers can be fitted)
9. 12/14, 82/84: Built-in integrated channels for pilot supply / pilot exhaust, no external piping needed
10. Установка ключа & Рекомендации по замене
11. Valve Slice Assembly & Disassembly: Loosen locking screws on both sides of valve terminal; pull entire slice out for direct replacement without disconnecting base air circuits
12. Air Supply Requirement: Compressed air with 5 μm precision filtration; custom valve slices with FKM seals required for vacuum operation
13. Cross-Series Interchangeability: 161414 (M5 thread) / 161415 (4 mm push-in) / 161416 (M7 thread) only differ in outlet ports; fully interchangeable in base and electrical systems
14. Flow Matching: QSM-M7-4-I is preferred for 4 mm tubing to match native 4 mm valve orifice with zero flow loss

Complete Procurement List for FESTO 161416 (КПВ10-М1Н-2Х3-ГЛС-М7)

Two schemes provided: Схема 1 Multi-pin Direct Connection (PLC Relay Output, General Standalone Machines) and Scheme 2 Profinet Bus Type (Автоматизированные производственные линии). Both use a standard 8-position valve terminal as example; one 161416 slice occupies 2 output channels.

General Basic Notes

Valve Slice: 161416 (КПВ10-М1Н-2Х3-ГЛС-М7), twin 3-way with M7 outlets, 24 В постоянного тока, 0.46 Вт;

4 mm PU tubing selected as default; supporting fittings primarily for 4 mm tubing, replaceable with 6 mm fittings for high flow demand.

Схема 1: 8-Position Multi-Pin Direct Connection Valve Terminal (CPV10-GE-DN3-8, Best Cost Performance)

1. Core Valve Terminal Assembly

2. Electrical Supporting Components (M12 Multi-pin Cable)

3. Air Supply & Exhaust Auxiliary Components (Base Pneumatic Circuits)

4. M7 Outlet Fittings for Valve Slices (Cylinder Actuator End)

Standard Straight Fittings (Direct Cylinder Connection)

153319 QSM-M7-4-I M7 external thread to 4 mm push-in straight fitting (standard preferred)

L Elbows for Confined Spaces

QSML-M7-4-I M7 4 mm right-angle elbow

Speed Control One-Way Flow Control (Mandatory for Cylinders)

GRLZ-M7-4 M7 right-angle exhaust flow control valve for precise speed regulation

Spare Blanking Plugs (Seal Unused Air Circuits)

578405 NPQH-BK-M7-P10 M7 threaded blank plug

5. inimal Complete Terminal Assembly Example (2 шт. 161416, 4 Output Circuits)
6. CPV10-GE-DN3-8 ×1
7. 161416 ×2
8. CPV10-END ×2
9. CPV10-BL ×2 (seal remaining 4 vacant positions)
10. KMYZ-7-24-4LED ×1
11. QS-1/8-6-I ×1
12. UC-M7 ×2, U-1/4-B ×1
13. QSM-M7-4-I ×4 (1 pc for each of 4 outlet circuits)
14. GRLZ-M7-4 ×4 (required if cylinder speed regulation is needed)

Схема 2: 8-Position Profinet Bus Valve Terminal (CPV10-GE-PN-8, Industry Standard for Production Lines)

1. Valve Terminal Assembly (Interchangeable with Multi-pin Scheme, Only Base Replaced)

2. Bus Electrical Accessories

3. Pneumatic Fittings, Silencers & Flow Control Valves

Fully compatible with Scheme 1; no re-selection required.

Selection Differentiation & Procurement Risk Avoidance

1. Non-interchangeable Bases: Only CPV10 series fits 161416; CPV14/CPV18 differ in width and cannot be mounted
2. Torque Standard: M7 fitting tightening torque limited to 2.2 Н·м; brute force will strip valve body threads
3. Vacuum Operation Upgrade: Standard NBR seals; custom FKM-sealed 161416 required for long-term vacuum service
4. Functionally Interchangeable Valve Slices

161414: M5 outlet thread; 161415: 4 mm push-in; 161416: M7 thread (model covered herein)

5. I/O Point Occupancy per Slice: 1 slice of 161416 = 2 output channels; calculate required slice quantity by dividing total cylinder count by 2 during base procurement

Simplified Order List Template (Directly Copyable for Purchasing)

8-Position Multi-Pin Valve Terminal (4 Cylinders, 2 шт. 161416)

1. CPV10-GE-DN3-8 ×1 piece
2. 161416 ×2 pieces
3. CPV10-END ×2 pieces
4. CPV10-BL ×2 pieces
5. KMYZ-7-24-4LED ×1 piece
6. QS-1/8-6-I ×1 piece
7. UC-M7 ×2 pieces
8. U-1/4-B ×1 piece
9. QSM-M7-4-I ×4 pieces
10. GRLZ-M7-4 ×4 pieces