Сименс 6ES7153-2BA02-0XB0

6ES7153-2BA02-0XB0 is an interface module of the ET200M distributed I/O system launched by Сименс, and it is an important component of the SIMATIC S7 automation system.

Основная информация

Product Status: This product has been discontinued, and its replacement is 6ES7153-2BA10-0XB0.

Product Description: It belongs to the SIMATIC DP series and is a high-performance connection module of ET200M IM 153-2. It can connect up to 12 S7-300 modules, has redundancy function, supports time stamping, and is suitable for synchronous mode.

Функциональные особенности

Communication Function: Supports the standard PROFIBUS DP protocol with a maximum communication rate of 12 Мбит/с, featuring excellent real-time performance and anti-interference capability.

Установка и обслуживание: Can be mounted on a standard DIN rail and supports hot-swapping function (when used with an active backplane bus), facilitating maintenance and expansion.

Требования к источнику питания: The module itself does not provide a local power supply and needs to be powered via the IM 153 backplane or an external 24V DC power supply, with an operating voltage range of 20.4V-28.8V DC.

Diagnostic Function: Equipped with built-in diagnostic LED indicators, which can display the operating status, bus communication status and fault information in real time, возможность быстрого определения места неисправности.

Address Setting: Supports manual setting of DP slave address via DIP switches (address range: 1-126) as well as automatic address allocation by the master station, ensuring strong compatibility.

Технические параметры

Напряжение питания: Rated value is DC 24V, with an allowable range of DC 20.4V-28.8V.

Входной ток: Maximum current consumption is 600mA, and the typical inrush current is 3A.

Выходное напряжение: Rated value is DC 5V.

Выходной ток: Maximum output current for the backplane bus (DC 5V) is 1.5A.

Потеря мощности: Typical value is 5.5W.

Address Range: Both the input and output address capacities are 244 байты.

Time Stamp Accuracy: 1ms when connecting up to 8 модули, and 10ms when connecting up to 12 модули.

Области применения: It is mainly used to connect remote I/O stations to the PROFIBUS DP fieldbus network to realize centralized control and data acquisition of field devices. Широко применяется в промышленной автоматизации., process control and manufacturing execution systems, and commonly used in industries such as chemical engineering, электроэнергия, очистка воды, metallurgy and machinery manufacturing.

Dimensional Specifications of 6ES7153-2BA02-0XB0

The standard physical dimensions (width × height × depth) of the Siemens ET200M IM 153-2 high-performance interface module 6ES7153-2BA02-0XB0 are 40 мм × 125 мм × 117 мм (то есть, 4 см × 12.5 см × 11.7 см).

Дополнительные примечания

1. Unit Conversion: The dimensions can also be expressed in inches: 1.57 in × 4.92 in × 4.61 в
2. Packaging Dimensions: According to Siemens Industry Mall, the packaging dimensions are 12.80 см × 15.10 см × 5.10 см (128 мм × 151 мм × 51 мм), with a gross weight of approximately 0.286 кг.
3. Weight Information: The net weight of the module is about 360 г (there is a slight difference among different sources, ranging from 220g to 360g).
4. Dimensional Compatibility: This dimension is consistent with the standard size of S7-300 series modules, ensuring seamless compatible installation with other S7-300 modules in the ET200M distributed I/O system.

Dimensional Comparison Between 6ES7153-2BA02-0XB0 and Its Replacement Model 6ES7153-2BA10-0XB0

Заключение: The two models have identical dimensions and can be replaced seamlessly

Дополнительные примечания

1. Significance of Dimensional Design: Both models adopt the standard module size of the S7-300 series, which ensures physical compatibility with other S7-300 modules in the ET200M distributed I/O system, eliminating the need to modify the mounting rail or cabinet layout for replacement.
2. Функциональные различия: Despite the same dimensions, the replacement model 6ES7153-2BA10-0XB0 has functional upgrades, including support for 12 modules per station, Slave INITIATIVE function, extended HART auxiliary variable data structure, support for 64-channel modules (32 signals per slot) and extended time stamping function.
3. Преимущества замены: Maintaining the same dimensional design is a common strategy for Siemens product upgrades, which can minimize the user’s replacement cost and ensure that the existing installation structure and system configuration do not need to be adjusted.