ADDA AK1782HB พัดลมแกน AC

ข้อมูลพื้นฐาน

ยี่ห้อ: ADDA Corporation (ไต้หวัน, จีน)

Full Model Suffix Distinction

AK1782HB-AT: Lead wire outlet (รุ่นมาตรฐาน)

AK1782HB-AW: Terminal connection version

ขนาด: 176×176×89 mm (Commonly named 17689 fan in the industry)

พาวเวอร์ซัพพลาย: AC 200–240V 50/60Hz (Single-phase 220V industrial fan)

ประเภทแบริ่ง: ลูกปืน

Standard Official Specifications

คำอธิบายรหัสรุ่น

และ: ADDA high-power AC axial fan series

178: Frame size 176mm

2: Voltage code → 220~230VAC (1=115V, 2=230V)

HB: Standard version with ball bearing

AT/AW: Suffix for wiring method

สถานการณ์การใช้งานทั่วไป

ตู้ควบคุมอุตสาหกรรม, inverter cabinets, high-power power supplies, UPS equipment, เครื่องเชื่อม, communication equipment, forced ventilation and heat dissipation for industrial machinery.

การจับคู่ & การอ้างอิงทดแทน

1. Low-voltage model of the same series: AK1781HB (115วี)
2. Form-fit compatible alternatives: 17689-size 220V AC axial fans from EBM, KAKU, BERA;

⚠️ Note: Mounting hole dimensions are identical, but airflow and pressure curves vary. Verify performance before direct replacement.

การจัดซื้อ & Fault Troubleshooting Tips

1. Distinguish AT lead wire type / AW terminal type to avoid mismatched wiring;
2. Original aluminum frame + PBT impeller, good heat resistance;
3. Common faults: Abnormal noise → bearing wear; Fan fails to start → coil burnout or capacitor failure;
4. อุปกรณ์เสริมเพิ่มเติม: Dust filter, mounting flange, safety grill.

Replacement Model List for ADDA AK1782HB (176×176×89mm AC220V)

Brief Specification Recap:

ขนาด: 176×176×89 mm; Power supply AC200–240V; ลูกปืน; 2800รอบต่อนาที / 330CFM at 50Hz; Standard mounting hole layout for 17689 form factor.

Suffix reminder: AK1782HB-AT (Lead wire)、AK1782HB-AW (เทอร์มินัล). Confirm wiring style before purchasing.

1. Original Factory Direct Replacement (การปรับเปลี่ยนเป็นศูนย์, Identical Performance)
2. AK1782HB-AT (Lead wire version)
3. AK1782HB-AW (Terminal version)

Only difference is wiring connection. IP55 waterproof version is available for humid working conditions.

2. Taiwan Brand Equivalent Alternatives (Stable Industrial Solution, Compatible Mounting)
3. KAKU

KA1789HA2BMT

ขนาด: 176×176×89mm AC220V; ลูกปืน

การไหลของอากาศ & static pressure close to AK1782HB; Aluminum frame; Lead wire / terminal options available

✅ Ideal for inverters, welding machines and high-power control cabinets; Widely stocked globally

2. SUNON

A17689-A2

17689 form factor AC230V; ลูกปืน

⚠️ Reminder: Some same-size SUNON models run at lower speed. Confirm speed ≥2700RPM before order.

3. Premium European Brands (อายุการใช้งานยาวนาน, Low Failure Rate, Higher Budget)

EBM-Papst

4658เอ็น

⚠️ Important Notice: เดียวกัน 176 square frame, 89ความหนา มม, รูยึดที่เข้ากันได้. Performance curve differs slightly; static pressure slightly better than ADDA. Suitable for tightly sealed cabinets with high airflow resistance.

ข้อดี: Extra-long service life, ความต้านทานการสั่นสะเทือน; Preferred for metallurgy and rail transit equipment; ต้นทุนที่สูงขึ้น.

4. ทางเลือกภายในประเทศที่คุ้มค่า (Mass Production Cost Reduction)
5. FENGYU / LANGWEI 17689-220B

ข้อมูลจำเพาะ: 176×176×89 AC220V ball bearing, 2800รอบต่อนาที; Performance matches original model; Customizable lead wire/terminal; IP54 protection optional.

2. OFENG OF17689AC220

Aluminum frame with PBT impeller; General domestic 17689 พัดลม; Suitable for ordinary cabinet ventilation with low air resistance.

3. เดลิซี่ / CHINT 17689 AC Axial Fan

Entry-level industrial option; For equipment with low continuous running hours and low ventilation resistance.

Key Selection Risks & Pitfall Reminders

1. Size Confusion

Many 17251 แฟน ๆ (172×150×51) look similar but only have 51mm thickness. Cannot directly replace 17689 (89หนา มม). Do not mix up models!

2. Bearing Selection

Must choose Ball Bearing type. Sleeve bearing only lasts several thousand hours, unable to match the original 70,000-hour lifespan.

3. Rotation Direction & Airflow Direction

Confirm air intake/exhaust direction before replacement; Airflow arrow is printed on most fan labels.

4. Wiring Outlet Type

AW model uses metal terminals, AT uses cables. Mismatch leads to rework on wiring.

5. System Resistance Matching

For sealed cabinets with multi-layer filters, select models with matching static pressure. Judging only by airflow will cause insufficient heat dissipation.

Selection Priority Recommendation

1. Non-stop critical equipment running 24/7: Original AK1782HB, KAKU KA1789HA2BMT
2. High-end equipment under heavy vibration: EBM 4658N
3. Mass cost reduction, standard cabinet ventilation: Domestic 17689-220B ball bearing model

Application Scenarios of ADDA AK1782HB (176×176×89mm AC220V Ball Bearing Fan)

Precondition Product Features

This fan delivers relatively high airflow and static pressure with long-life ball bearings. Ideal for high-power equipment, sealed cabinets and systems fitted with filters (high air duct resistance). Versions: AK1782HB-AT (Lead wire)、AK1782HB-AW (เทอร์มินัล).

1. ระบบอัตโนมัติทางอุตสาหกรรม & Power Drive (แอปพลิเคชันหลัก)
2. Heat dissipation for high-power inverter cabinets

Internal cooling and cabinet ventilation for ฟูจิ, ยาสกาวา, ซีเมนส์, ดานฟอสส์, Inovance and other high-inverter; Original standard fan or spare replacement unit.

2. Servo control cabinets & high-power PLC electrical cabinets

Complete control cabinets, low-voltage distribution cabinets, rectifier cabinets, forced cooling for braking resistors.

3. ยูพีเอส & high-power industrial switching power supplies

Heat dissipation for industrial frequency UPS, high-frequency inverters and charging pile power modules.

4. เครื่องเชื่อม & plasma cutting equipment

Internal ventilation for industrial inverter welders and plasma power sources (heavy heat generation, dusty environment).

2. Machinery Manufacturing Industry
3. Control cabinets of injection molding & extruder machines

Cooling for electric cabinets and temperature control units on injection molding machines.

2. Laser equipment & robot control cabinets

Power cabinet ventilation for laser cutting machines and robotic controllers.

3. Electric cabinets of air compressors & hydraulic stations

Heat dissipation for hydraulic control systems and air compressor inverter cabinets.

3. พลังงานใหม่ & อุตสาหกรรมไฟฟ้า
4. Ventilation for PV inverters and PCS energy storage cabinets

Cooling for commercial energy storage cabinets and centralized photovoltaic inverters.

2. Auxiliary cooling for wind turbine control cabinets & box transformers

Control cabinets inside wind towers and auxiliary ventilation for compact substation.

4. โทรคมนาคม & อุปกรณ์อัจฉริยะ
5. Industrial base station cabinets & private network equipment enclosures

Forced convection cooling for outdoor integrated communication cabinets.

2. Testing instruments & aging equipment

Air circulation inside power aging racks, electronic loads and temperature cycling chambers.

5. Other General Industrial Applications
6. Air circulation for industrial ovens & constant temperature equipment

Normal hot air circulation, non-high-temperature baking environment (ambient temperature＜60℃).

2. Ventilation for industrial air purifiers and dust removal cabinets

Purifier cabinets fitted with primary filters; High static pressure overcomes filter resistance.

3. Electrical cabinets for rail transit and port automation equipment

✅ Advantages for Matching Working Conditions

1. High static pressure: Outperforms slim fans of similar size, suitable for installation with dust grilles and multi-layer filters in high-resistance air ducts;
2. ลูกปืน: Supports long-term 24-hour continuous operation, rated life 70,000 ชั่วโมง, applicable for unattended industrial equipment;
3. แหล่งจ่ายไฟ AC220V โดยตรง: No extra power module required, convenient wiring for industrial control equipment;
4. Aluminum frame: Vibration resistant, suitable for machine tools, welding machines and other vibration-prone equipment.

⚠️ Not Recommended Working Conditions

1. Continuous ambient temperature over 65℃ inside sealed enclosures;
2. Environment with strong corrosive gas or heavy oil splashes without protective measures;
3. Noise-sensitive applications (สูงสุด. 70 ดีบีเอ; low-speed models recommended for silent requirements);
4. Installation space thickness less than 89mm.