บี&R 3DO479.6 PLC Digital Output Module

ภาพรวมพื้นฐาน

1. Brand Series: Digital output module for บี&ร ระบบ 2005 บมจ จาก Austria B&ร (abbreviated model: DO479)
2. สถานะวงจรชีวิต: ยกเลิก. Original manufacturer ceases mass production; only brand-new stock and refurbished second-hand spare parts are available on the market.
3. Alternative Model Naming: 3D04796, 3DO479.6 (จดหมาย “โอ” is often written as digit “0” in the industry)
4. รหัส HS: 8538909100 (Electrical control assemblies)
5. ข้อมูลจำเพาะทางไฟฟ้าหลัก

3. ด้านสิ่งแวดล้อม & ข้อมูลจำเพาะทางกล
4. อุณหภูมิในการทำงาน: 0 ℃~ +60 ℃
5. พื้นที่จัดเก็บ / อุณหภูมิการขนส่ง: -25 ℃~ +70 ℃
6. ความชื้น: 5% ~ 95% RH, ไม่ควบแน่น
7. ขนาด: Standard single-width System 2005 โมดูล, การติดตั้งราง DIN
8. การรับรอง: ซีอี, คิวลัส (FILE E115267) industrial control equipment certifications
9. ฮาร์ดแวร์ & Indicators

16 independent status LEDs on the front panel; each LED illuminates when the corresponding output channel is activated

Red locking latches on the top for snap-in connection to the System 2005 รถบัสแบ็คเพลน

TB170 wiring terminal blocks on the right with group-split power supply: two independent 24 VDC output power loops

5. สถานการณ์การใช้งานทั่วไป

เข้ากันได้กับบี&ระบบอาร์ 2005 CPUs (3CPxx series) for discrete logic control on medium & small-sized machinery:

1. เครื่องจักรบรรจุภัณฑ์: โซลินอยด์วาล์ว, air cylinders, conveyor belt start/stop
2. สิ่งทอ & อุปกรณ์การพิมพ์: Clutches, air blowing units, slitting actuators
3. Injection molding auxiliary machines, woodworking machine tools, pneumatic actuators for food production lines
4. Auxiliary discrete outputs for wind power and small metallurgy equipment
5. Replacement Solutions for Discontinued Units

6.1 Direct Compatible Replacements within System 2005

3DO478.6: 16 ทำ, 0.3 ต่อช่อง; low current rating, applicable only for light-load scenarios

3DO480.6: 16 ทำ, 1 ต่อช่อง; preferred for heavy loads with no program modification required

6.2 Cross-Series Upgrade (New X20 System, Recommended for New Projects)

X20DO9322 (16-ช่อง 24 กระแสตรง 0.5 A sourcing output with identical functionality; backplane and CPU replacement required)

7. การจัดซื้อจัดจ้าง & Troubleshooting Guidelines

หมายเหตุการจัดซื้อจัดจ้าง

Brand-new original units are mostly leftover inventory; abundant refurbished second-hand supplies with warranty periods ranging from 1 ถึง 12 เดือน

Market price range: หยวน 3,000 ~ 4,500 for new units; หยวน 1,200 ~ 2,200 for refurbished units

เมทริกซ์การแก้ไขปัญหาข้อผิดพลาดทั่วไป

8. Selection Restrictions
9. Cannot drive AC contactors (transistor-only DC outputs without relay contacts)
10. Single-channel load current strictly limited to ≤0.5 A; total load per group shall not exceed 4 ก
11. Forbidden for humid, dusty or open-air environments (IP20 rating only)
12. Not recommended for mass deployment in new projects; X20 series is the preferred alternative

Field Application Case Sharing of B&R 3DO479.6 (3D0479.6)

Basic Module Compatibility Prerequisites

16-ช่อง 24 VDC sourcing transistor outputs, two electrically isolated groups (Channels 0–8 / 9–16), 0.5 ต่อช่อง, compatible with all System 2005 PCC models. Primarily designed to drive solenoid valves, indicator lamps, เล็ก 24 VDC actuators, and variable frequency drive start/reset signals. Ideal for discrete logic control on standalone medium & เครื่องจักรขนาดเล็ก. Split-group isolation separates air supply loops and alarm loops; built-in automatic thermal short-circuit protection delivers low failure rates.

กรณี 1: Automatic 3D Transparent Film Wrapping Machine (อาหาร & Pharmaceutical Packaging Industry)

1. Equipment Architecture

คอนโทรลเลอร์: ระบบ 2005 PCC Model 3CP260.60-1

Output Modules: 2 × 3DO479.6 (32 DO points total) + TB170 spring terminals

Matching DI Module: 3DI476.6 (16 อินพุตดิจิตอล)

Controlled Loads: 24 VDC 5/2-way solenoid valves, heat sealing heater start/stop, film cutting cylinders, conveyor alarm lamps, VFD fault reset

2. Channel Allocation for Single 3DO479.6

Group 1 (CH01–CH08, independent 24 VDC air supply loop):

1. Infeed pusher cylinder solenoid valve
2. Film folding side sealing cylinder
3. End sealing hot-pressing cylinder
4. Film tension deviation correction solenoid valve
5. Finished product discharge sorting cylinder
6. Waste film cutting knife solenoid valve
7. Film rack lifting cylinder
8. Spare station cylinder

Group 2 (CH09–CH16, independent 24 VDC alarm/auxiliary supply, isolated from air supply loop):

9. Equipment running green indicator lamp
10. Fault red warning lamp
11. Film shortage audible & visual alarm output
12. Material jam shutdown indicator lamp
13. VFD start signal
14. VFD fault reset
15. Heat sealing cooling fan start/stop
16. อัตโนมัติ / Manual mode indicator lamp
17. Core Advantages of Adopting 3DO479.6
18. Two-group electrical isolation: Separates air valve loops and alarm lamp power supplies. Reverse voltage surges from inductive solenoid loads cannot damage alarm circuits. Built-in freewheeling diodes eliminate the need for external parallel diodes and reduce on-site wiring workload.
19. 0.5 A per channel perfectly matches small packaging machine cylinder solenoid valves; total current limit of 4 A for each 8-channel group fully satisfies simultaneous multi-cylinder actuation load demands.
20. Channel thermal short-circuit lockout: Only the faulty channel is disabled when cylinders jam or coils short-circuit; the entire machine remains operational with single-channel fault alarms for fast maintenance localization.
21. High-density single-width 16-point module saves cabinet space; only two DO modules cover all logic outputs for one wrapping machine.
22. On-Site Operation Results

Mass deployed across over 200 wrapping machines running continuously for 8 ปี. เท่านั้น 3 units triggered single-channel overcurrent protection with zero complete module burnout failures. Refurbished or stock 3DO479.6 spare parts are readily available on the aftermarket to cut equipment maintenance costs.

กรณี 2: Automatic Pick-and-Place Robot for Injection Molding Auxiliaries (พลาสติก & Home Appliance Injection Molding Industry)

1. System Hardware

ซีพียู: ระบบ 2005 Model 3CP360.60-1

DO Module: 1 × 3DO479.6 (robot motion outputs)

Loads: 24 VDC clamping cylinders, blow-off solenoid valves, sprue cutting valves, safety door indicator lamps, alarm outputs, injection molding machine interlock start/stop signals

2. Typical Control Workflow

Mold full open signal → 3DO479.6 outputs to lower travel cylinder → gripper clamps workpiece → blow-off valve purges sprue residue → cutting solenoid valve trims waste sprue → lifting cylinder returns to home position → discharge cylinder pushes finished product out. Fault conditions trigger warning lamps and cut interlock signals to the injection molding machine.

3. Selection Rationale

All robot cylinders use low-power 24 VDC solenoid valves with coil currents of 0.2~0.4 A, below the 0.5 A rated limit. Dual isolation separates motion actuation loops and safety alarm loops, preventing safety lamp circuit damage caused by robot jamming short-circuits. Compact machine footprint allows all actuator outputs to be covered by a single 16-point module without stacking multiple low-density I/O units.

4. Pain Point Resolution

Earlier non-isolated DO modules frequently suffered total alarm circuit failure when solenoid coils broke down. Group isolation on the 3DO479.6 completely eliminates cross-loop interference and cuts machine downtime failure rates by 60%.

กรณี 3: Automatic Fabric Folding & สายการผลิตบรรจุภัณฑ์ (Textile Printing & อุตสาหกรรมการย้อมสี)

1. สถานการณ์การใช้งาน

Continuous line for automatic fabric flattening, folding, bagging and heat sealing post-printing/dyeing, with centralized discrete logic control over multi-section conveyors, lifting cylinders and heat seal stations.

2. 3DO479.6 Channel Assignment

Group 1 (กำลังลำเลียง / Folding Cylinders): Fabric flattening roller lift, left-right edge separation cylinders, folding press plates, wrapping film pushing valves

Group 2 (เตือน / เอาต์พุตเสริม): Fabric shortage warning lamp, heat sealing heater start/stop, conveyor motor enable signal, emergency stop fault output, count completion indicator lamp

3. On-Site Adaptation Features

Textile workshops feature high dust and humidity; the module’s wide 0~60 ℃ operating temperature range suits workshop environments. IP20 cabinet mounting paired with dustproof enclosures ensures stable operation. Independent per-channel LEDs enable rapid localization of jammed or disconnected cylinder points during maintenance.

กรณี 4: Auxiliary Logic Control for Small Industrial Boilers (เครื่องทำความร้อน & Food Cooking Process Industry)

1. สถาปัตยกรรมระบบ

บี&ระบบอาร์ 2005 PCC boiler control system; analog modules handle temperature and pressure regulation, while the 3DO479.6 executes all discrete actuation outputs: Induced draft / forced draft fan start/stop signals, feedwater solenoid valves, blowdown valves, high/low water level warning lamps, overtemperature interlock shutdown outputs.

2. Isolation Value Demonstration

Group 1: แฟนๆ, feedwater & blowdown valves (high-power inductive loads)

Group 2: Alarm lamps, interlock shutdown contacts (low-voltage signal loops)

Independent isolated power supplies for the two groups block voltage spikes generated by fan contactor switching from interfering with alarm and safety interlock signals, eliminating risk of false boiler shutdowns.

กรณี 5: Auxiliary Logic Control for CNC Wood Panel Cutters (Furniture Manufacturing Industry)

Controlled Loads

Panel clamping cylinders, infeed stop valves, dust extraction fan start/stop, dimension reach indicator lamps, material jam fault alarms, saw blade guard solenoid valves.

Module Advantages

Machinery requires simultaneous multi-cylinder actuation; ที่ 4 A total current ceiling per 8-channel group supports multiple concurrent solenoid valve activations. Thermal short-circuit protection prevents total machine loss of control from coil burnout caused by jammed panels, suited for high-impact, high-dust woodworking workshop conditions.

การคัดเลือกทั่วไป & On-Site Maintenance Summary

1. Equipment Profiles Suitable for 3DO479.6
2. All outputs are small 24 VDC solenoid valves, indicator lamps, VFD start/reset signals, or small 24 VDC fans with single-point loads ≤0.5 A
3. Systems requiring electrical isolation between actuation loops and alarm loops to prevent low-voltage signal interference from inductive loads
4. Standalone machines with 8~32 discrete output points, compact cabinet layouts requiring high-density single-width I/O modules
5. Retrofit and spare part replacement for legacy System 2005 equipment fleets
6. สถานการณ์ที่ไม่เหมาะสม (Selection Pitfalls to Avoid)
7. Driving AC contactors or high-current DC solenoid valves (single-channel load >0.5 ก)
8. Explosion-proof or open-air non-cabinet environments (IP20 rating only)
9. New greenfield machine designs (X20 series X20DO9322 is preferred alternative)
10. Applications requiring full channel-to-channel isolation (only group isolation available; no inter-channel isolation)
11. Common Retrofit & Replacement Cases

Large fleets of legacy packaging, textile and injection molding machines originally equipped with System 2005 hardware are now discontinued by OEMs. When spare modules fail, stock or refurbished 3DO479.6 units are directly installed with no program edits, plug-and-play backplane compatibility and universal TB170 terminals. Full replacement finishes within 10 minutes without wiring or software modifications.

Complete List of Discontinued B&R Modules (Original Manufacturer EOL, No Further Mass Production)

1. ระบบเต็ม 2005 ชุด (Fully Discontinued, Including 3DO479.6)

1.1 CPU Controllers (3CP Series)

3CP260.60-1, 3CP340.60-2, 3CP360.60-1, 3CP360.60-2, 3CP380.60-1

Auxiliary Processor: 3ไอเอฟ260.60-1

1.2 อินพุตดิจิตอล (จาก) โมดูล

3DI476.6 (16 จาก), 3DI486.6 (32 จาก), 3DI650.6, 3DI690.6

1.3 เอาท์พุทดิจิตอล (ทำ) โมดูล (Including 3DO479.6)

3DO478.6, 3DO479.6, 3DO480.6, 3DO486.6, 3DO650.6, 3DO690.6, 3DO750.6, 3DO760.6 (8 เอาท์พุทรีเลย์)

1.4 Combined Digital I/O Modules (DI+DO Integrated, DM Series)

3DM455.60.2, 3DM476.6, 3DM486.6

1.5 อินพุตแบบอะนาล็อก (AI) โมดูล

3AI350.6, 3AI375.6, 3AI775.6, 3AI780.6, 3AT660.6 (Thermocouple module)

1.6 เอาท์พุทแบบอะนาล็อก (ถึง) โมดูล

3AO300.6

1.7 Combined Analog I/O Modules (AI+AO Integrated, AM Series)

3AM050.6, 3AM051.6, 3AM055.6, 3AM374.6

1.8 Universal Mixed I/O Module

3UM161.6

1.9 การสื่อสาร / Bus Interface Modules

3IF761.6, 3IF772.6, 3IF786.6, 3IF860.6

1.10 Matching Terminals (Simultaneously Discontinued)

3TB170.9 (ขั้วต่อสกรู), 3TB170.91 (Spring terminals), 3TB178.9, 3TB178.91

2. Legacy System 2003 PLC Series (Fully EOL)

Digital Output DO Modules

7DO135.70, 7DO138.70, 7DO139.70, 7DO164.70, 7DO435.7, 7DO720.7, 7DO721.7, 7DO722.7

Combined Digital DM Modules

7DM435.7, 7DM438.72, 7DM465.7

การนับ / Positioning Modules

7CM211.7, 7CM411.70-1, 7MM424.70-1, 7MM432.70-1

Remote X2X I/O Modules

7XX410.50-1, 7XX412.50-1, 7XX415.50-K02, 7EX470.50-1

3. 1st-Generation ACOPOS Servo Drives (Discontinued Legacy Models, Excluding ACOPOSmulti)

Full legacy single-axis drive series: 8V1016.50-2, 8V1022, 8V1044, 8AC110, 8AC120, 8AC130, 8AC140

4. Legacy Power Panel HMI Touch Screens (Discontinued Operator Panels)

Early PP400 series models: 4P3040.00-490, 4PP120, 4PP150, 4PP220, 4PP250, 5PP320

5. Early Discontinued X20 I/O Modules (1st-Generation X20, Superseded by New Models)
6. Discontinued digital outputs: X20DO2322, X20DO4322, X20DO6321
7. Legacy bus controllers: X20BC0043, X20BC0063 (Replaced by X20BC0083)
8. Legacy CPUs: X20CP1483, X20CP3483, X20CP1583
9. Discontinued Storage Accessories

Legacy industrial CF cards (discontinued industrial standard): 5ซีเอฟซีอาร์ดี.0064-03, 5ซีเอฟซีอาร์ดี.0128, 5ซีเอฟซีอาร์ดี.0256

Master Comparison Table for Discontinued Module Replacements (Focus on System 2005 ชุด)

Important Remarks

1. The entire System 2005 product line has been terminated by the OEM with no further firmware technical updates. Only leftover stock and refurbished second-hand spare parts circulate on the aftermarket; prohibited for new project selection.
2. Repair policy for discontinued modules: OEM no longer provides component-level repair; full module replacement is the only option, and service availability declines year over year.
3. Compatibility limitations: ระบบ 2003 / 2005 backplanes cannot directly interface with X20 bus systems. Full machine upgrades require complete replacement of backplane, CPU and all I/O modules plus partial communication program rework.
4. Your primary module 3D0479.6 = 3DO479.6 is a standard discontinued DO module within the System 2005 lineup; refurbished units constitute the main spare part supply source for maintenance operations.

หมายเหตุการแปล

1. Industry-standard automation terminology adopted (sourcing output, รางปีกนก, backplane, interlock, ไดโอดอิสระ, EOL = End of Life, รหัส HS)
2. Model numbers, certification file numbers and mechanical parameters remain unchanged as original technical data
3. Unit currency CNY retained for price references; technical metric units kept consistent
4. Table formats, heading hierarchy and section segmentation match the original Chinese document for direct use in international technical documents, catalogs and tender files