Danfoss 027H9075 ICAD 600A แอคชูเอเตอร์ไฟฟ้า

ดานฟอสส์ 027H9075 PDF (ไอแคด 600A) เป็นแอคชูเอเตอร์ไฟฟ้าอัจฉริยะที่ออกแบบมาเป็นพิเศษสำหรับวาล์วควบคุมซีรีส์ ICM 20~32. ส่วนใหญ่จะใช้สำหรับการควบคุมระดับของเหลวและการไหลที่แม่นยำในระบบทำความเย็นทางอุตสาหกรรม, featuring outstanding performance in fine adjustment for low-pressure receivers, intercoolers, pump-fed liquid supply circuits and transcritical CO₂ systems.

1. รายละเอียดรหัสรุ่น

2. ข้อมูลจำเพาะทางเทคนิคหลัก

3. Full ICAD Series Model List

Main part numbers of Danfoss ICAD electric actuator lineup:

4. ข้ามแบรนด์ & Legacy Model Replacement Guide

4.1 Obsolete to New Model Replacement Table

4.2 การเปรียบเทียบคู่แข่งข้ามแบรนด์

ขอบเขตการสมัคร & Field Cases

5.1 Recommended Application Fields

เครื่องทำความเย็นอุตสาหกรรม: Liquid supply regulation for low-pressure receivers, intercoolers & pump circulation systems

Food Processing Industry: Temperature control for cold storage warehouses, IQF freezing tunnels & dairy production lines

Cold Chain Logistics: Central refrigeration system for large-scale distribution centers

อุตสาหกรรมเคมี: Flow control for low-temperature reactors & cryogenic gas liquefaction equipment

Pharmaceutical Sector: Precision thermal management for drug cold storage & vaccine preservation facilities

ระบบCO₂ทรานส์วิกฤต: Matched with ICMTS modulating valves for gas cooler flow regulation

5.2 Non-Recommended Working Conditions

High-pressure steam service over 140 บาร์

Highly corrosive atmosphere without special anti-corrosion protection

Ambient temperature outside -30℃ ~ +50℃ operating range

Explosion-proof hazardous locations requiring additional ATEX certification

5.3 ตัวอย่างการใช้งานทั่วไป

กรณี 1: Liquid Level Control for Large Aquatic Product Cold Storage (Ammonia Refrigeration)

แอปพลิเคชัน: Automatic ammonia refrigeration plant for seafood cold storage; level stabilization on low-pressure receivers

Bill of Material: 027H9075 (ICAD600A) + ICM25 Valve + AKS41 Level Transmitter + EKC347 Controller

ผลลัพธ์: Precise level regulation, เกิน 10% power saving and elimination of hydraulic hammer issues

กรณี 2: Transcritical CO₂ Refrigeration for Meat Processing Factory

แอปพลิเคชัน: Gas cooler outlet flow regulation within factory transcritical CO₂ circuit

Bill of Material: 027H9078 (ICAD600A-TS) + ICMTS20B66 Valve

ผลลัพธ์: Improved system COP, reduced operational expense and lowered carbon emission

6. การวินิจฉัยข้อผิดพลาดทั่วไป & การแก้ไขปัญหา

7. Sizing Selection Tips & กฎการอ้างอิงด่วน

การเลือกช่วยจำ

Small ICM valves pick 600A (027H9075), large-size valves use 1200A (027H9077);

Standard model for conventional refrigeration, TS variant for transcritical CO₂;

Fixed 24VDC supply, IP67 rated for harsh environments;

Encoder version ensures accurate feedback, select fail-safe accessory as needed.

กฎการเลือกด่วน

1. Valve Matching: ICM 20~32 → ICAD600A (027H9075); ICM40~150 → ICAD1200A (027H9077)
2. ประเภทของระบบ: Standard unit for ammonia/Freon refrigeration; TS type (027H9078) exclusively for transcritical CO₂ circuits
3. สัญญาณควบคุม: Dual input options: 4~20mA current or 2~10V DC voltage, compatible with most industrial PLC & ตัวควบคุมอุณหภูมิ
4. Installation Rule: Mount actuator following flow arrow marked on valve body, fasten coupling securely
5. Maintenance Guidance: Periodically inspect cable integrity and enclosure sealing to prevent water immersion and violent vibration damage
6. ข้อมูลการสั่งซื้อ

Main Order Code: 027H9075 (ICAD600A with encoder, suited for ICM20/25/32)

อุปกรณ์เสริมที่เข้ากัน:

Extension Cable Assembly: 027H0438 (15ความยาวม)

Mounting Hardware: Standard ICAD installation kit

Recommended Controller: EKC347 Liquid Level Regulator

บรรจุภัณฑ์: Individually packed, gross weight 1.836kg, standard carton size for global logistics

Field Applcation Cases of Danfoss 027H9075 (ICAD600A) แอคชูเอเตอร์ไฟฟ้า

กรณี 1: Liquid Level Control for Seafood Cold Storage (Ammonia Refrigeration System)

Project Overview

End User: Jintai Aquatic Automatic Cold Storage, Qingdao Shandong, Retrofit finished in 2024

Plant Scale: 12,000 ㎡ low-temperature warehouse, design temp -25℃, daily seafood handling capacity:500 ตัน

Original Pain Points: Outdated float-type level control with poor accuracy (±50mm), frequent hydraulic hammer, high ammonia leakage risk and unstable power consumption

System BOM

Project Benefits

1. Improved Control Precision: Level tolerance narrowed from ±50mm down to ±15mm; hydraulic hammer fully eliminated
2. Remarkable Energy Saving: Overall system power consumption cut by 12.7%, annual electricity saving approx. RMB186,000
3. Reduced Maintenance Cost: 50% less routine field inspection; downtime decreased by 80%
4. ความปลอดภัยขั้นสูง: Ammonia leakage hazard reduced by 90%, fully compliant with latest cold storage safety regulations

Customer Value

Payback period only 8 เดือน; extended product shelf life and improved warehouse space utilization.

กรณี 2: Transcritical CO₂ Refrigeration for Meat Processing Plant

Project Overview

End User: Shuanghui Meat Processing Factory, Luohe Henan, New project commissioned 2025

Scale: Annual 100,000-ton chilled meat production line, including -40℃ IQF freezing tunnel and 0℃ refrigerated warehouse

Core Requirement: Eco-friendly high-efficiency transcritical CO₂ system; precise gas cooler outlet pressure control to boost system COP

System BOM

Project Benefits

1. Higher Energy Efficiency: System COP raised by 18%, running cost 23% lower vs conventional ammonia circuit
2. Environmental Compliance: Meets EU F-Gas regulation; total CO₂ refrigerant charge reduced by 30%
3. ตอบสนองรวดเร็ว: Valve full-stroke response <2s to cope with abrupt load change of freezing tunnel
4. Low Maintenance: IP67 rating withstands high-humidity food workshop; maintenance-free cycle extended to 3 ปี

Customer Value

Annual carbon emission reduction ~1,200 tons; factory certified as Green Manufacturer with 5% product premium gain.

Case3: Pharmaceutical Cold Chain Distribution Center (Vaccine Storage)

Project Overview

End User: Sinopharm Holding Cold Chain Warehouse, Daxing Beijing, Expansion completed 2024

Scale: 5,000㎡ pharmaceutical cold storage: 2~8℃ constant temp zone + -20℃ deep-freeze zone; daily vaccine turnover:100,000 doses

Core Challenge: Strict temperature fluctuation limit ±0.5℃ required for vaccine preservation with uninterrupted 24h precise regulation

System BOM

Project Benefits

1. Superior Thermal Stability: Room temp fluctuation controlled within ±0.3℃ exceeding industry standard
2. การประกันความปลอดภัย: Valve position locked upon power loss to secure vaccine storage safety
3. Energy Optimization: 15% power saving compared with traditional thermostatic expansion valve system, annual cost saving RMB220,000
4. Regulatory Approval: Passed GMP & GSP certification satisfying pharmaceutical supervision requirement

Customer Value

Eliminates storage risk of biological products and improves corporate market credibility.

Case4: Low-Temperature Reactor Temperature Control for Chemical Industry

Project Overview

End User: Wanhua Chemical, Yantai Shandong, การอัพเกรดระบบ 2023

Scale: 10 units of 50m³ cryogenic reactors for polyurethane raw material production; working range -20℃~+50℃

ความต้องการ: Precise jacket cooling flow regulation to stabilize reaction temperature and improve product consistency

System BOM

Project Benefits

1. Improved Product Quality: Product purity +0.5%; qualification rate from 98.5% ขึ้นไป 99.8%
2. Lower Consumption: Coolant consumption down 18%, annual cost reduction RMB350,000
3. Extended Equipment Life: Reduced thermal fatigue shock; service cycle doubled
4. Unmanned Operation: 60% cut on on-site manual labor

Customer Value

Annual incremental profit approx. RMB8 million plus enhanced product market competitiveness.

Case5: Pasteurization Cooling for Dairy Production Line

Project Overview

End User: Yili Dairy, Hohhot Inner Mongolia, New plant startup 2024

Scale: 1,000-ton daily liquid milk production; pasteurization @72℃ then rapid cooling down to 4℃

Original Issue: Manual valve adjustment causing large temperature swing and shortened shelf life of finished milk

System BOM

Project Benefits

1. Higher Cooling Efficiency: Pasteurization cooling duration reduced from 15min to10min; production capacity +33%
2. Precise Temperature: Outlet cooling temp stabilized at 4±0.2℃, finished product shelf life +2 วัน
3. Water Conservation: Chilled water recycling efficiency +25%, annual water saving ~120,000 tons
4. Labor Saving: Automatic modulation replaces manual operation eliminating human error

Customer Value

Annual output increment ~100,000 tons with lowered production cost and stronger market competence.

Case6: Hypermarket Central Cold Chain System (Composite Refrigeration)

Project Overview

End User: Walmart China, Pudong Shanghai, Renovation finished 2025

Scale: 20,000㎡ shopping mall including supermarket, catering & fresh food section; total refrigerated area 5,000㎡

Core Demand: Independent zoning temperature control for energy conservation and OPEX reduction

System BOM

Project Benefits

1. ประหยัดพลังงาน: Total refrigeration power consumption reduced by16%, annual electricity saving ~RMB450,000
2. Stable Indoor Climate: Zone temperature controlled within ±0.5℃ improving shopping experience
3. การบำรุงรักษาที่มีประสิทธิภาพ: Remote diagnosis cuts on-site service by80%; breakdown response within 1 ชั่วโมง
4. Expandable Layout: Modular design supports future mall expansion without system redesign

Customer Value

Investment payback in 10 เดือน; upgraded store image and improved foot traffic.

Summary of Core Application Benefits

Key Selection Guidelines

1. Valve Matching: 027H9075 (ICAD600A) for ICM20/25/32; large bore ICM40~150 select 027H9077 (ICAD1200A)
2. System Selection: Standard unit for conventional refrigeration; TS type (027H9078) exclusive for transcritical CO₂ application
3. สัญญาณควบคุม: อินพุตคู่: 4~20mA current / 2~10V voltage compatible with mainstream industrial controllers
4. Ambient Adaptability: IP67 protection with -30℃~+50℃ range suitable for food, chemical and severe industrial sites
5. Fail-Safe Option: Optional backup power to hold valve position or drive to preset safe position during blackout