Schneider GVAE20
- การตีความรหัสโมเดล
| ส่วนรหัส | คำอธิบาย |
| GV | รหัสชุดผลิตภัณฑ์, accessory of TeSys GV motor circuit breaker |
| เออี | ตำแหน่งการติดตั้ง & พิมพ์; A=Auxiliary contact, E=Front Mounting |
| 20 | การกำหนดค่าการติดต่อ; 2 ผู้ติดต่อ, 0=Normally Open, namely 2NO |
ชื่อเต็ม: Schneider TeSys GV Series Front-mounted 2NO Instant บล็อกติดต่อเสริม
- พารามิเตอร์ทางเทคนิคหลัก
| รายการพารามิเตอร์ | ข้อมูลจำเพาะ |
| ประเภทสินค้า | Instant Auxiliary Contact Block |
| การกำหนดค่าการติดต่อ | 2เลขที่, instantaneous operation |
| กระแสไฟในการดำเนินงานที่ได้รับการจัดอันดับ | เครื่องปรับอากาศ: 2.5ก(240วี), ดี.ซี: 1ก(60วี) |
| จัดอันดับแรงดันไฟฟ้าของฉนวน | 380วีและ |
| จัดอันดับแรงดันไฟฟ้าในการทำงาน | เครื่องปรับอากาศ: 24-240วี, ดี.ซี: 24-60วี |
| Minimum Switching Current | 5มิลลิแอมป์ |
| ประเภทการติดตั้ง | Front Mount, compatible with GV2/GV3 motor circuit breakers |
| ประเภทสายไฟ | Screw Clamp Terminals |
| Applicable Models | GV2L, GV2LE, GV2ME, GV2P, GV2RT, GV3L, GV3P, LS1D32 |
| มิติ | 28.956มม(ล) × 22.5mm(ว) × 45มม(ชม) |
| น้ำหนัก | 0.02กก (ประมาณ. 20ก) |
| อุณหภูมิแวดล้อม | -25°ซ ~ +60°ซ |
| ระดับการป้องกัน | IP20 (สอดคล้องกับ IEC 60529) |
| หมายเลขคำสั่งซื้อ | GVAE20, อีเอ็น: 3389110343465 |
| บรรจุภัณฑ์ | 10 pcs per standard pack |
- รายการรุ่นซีรีส์เต็ม
Schneider GV auxiliary contacts are divided into front-mounted GVAE and side-mounted GVAN series.
| ชุด | แบบอย่าง | ประเภทการติดต่อ | ตำแหน่งการติดตั้ง | Applicable Products |
| GVAE Front Mount | GVAE1 | 1NO or 1NC convertible | ด้านหน้า | GV2/GV3 Series |
| GVAE11 | 1NO+1NC | ด้านหน้า | GV2/GV3 Series | |
| GVAE20 | 2เลขที่ | ด้านหน้า | GV2/GV3 Series | |
| GVAN Side Mount | GVAN11 | 1NO+1NC | Side | GV2/GV3 Series |
| GVAN20 | 2เลขที่ | Side | GV2/GV3 Series | |
| GVAD Fault Contact | GVAD1010 | 1NO alarm +1NO auxiliary | Front/Side | GV2/GV3 Series |
| GVAD0110 | 1NC alarm +1NO auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD1001 | 1NO alarm +1NC auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD0101 | 1NC alarm +1NC auxiliary | Front/Side | GV2/GV3 Series |
- ข้อมูลอ้างอิงการเปลี่ยนข้ามแบรนด์
| ชไนเดอร์โมเดล | เทียบเท่า ABB | เทียบเท่ากับซีเมนส์ | Eaton Equivalent | Replacement Features |
| GVAE20 (2เลขที่, Front Mount) | 2CCS800900R0021 (S800 series, 4ก) | 3RH1921-2XA22-0MA0 (Clip mount, 6ก) | DILM series auxiliary contact (5ก) | Identical contact layout, fit respective brand motor breakers; slight rated current difference |
เคล็ดลับการเลือก: 2NO front mount choose GVAE20; ABB S800, Siemens 3RH, Eaton DILM
- ข้อผิดพลาดทั่วไป & โซลูชั่น
| ปรากฏการณ์ความผิดปกติ | สาเหตุที่เป็นไปได้ | โซลูชั่น |
| Contact failure | การติดตั้งที่ไม่เหมาะสม, stuck mechanism, damaged linkage | Reinstall firmly, clean foreign matters, replace contact block |
| การติดต่อไม่ดี | Oxidation, loose terminal, severe wear | Polish contact surface, retighten wiring, replace component |
| ติดต่อการระเหย | Overload current, frequent switching, แรงดันไฟฟ้าเกิน | Control current within 2.5A, reduce frequent operation, verify voltage range |
| Difficult installation | Model mismatch, wrong direction, broken buckle | Confirm GV2/GV3 compatibility, install as arrow direction, replace part |
- Air Transport Compliance & การรับรอง
6.1 Air Transport Compliance
No built-in lithium battery or supercapacitor, pure electromechanical component, meets international air safety standards
Cargo category: general goods, no special shipping label required
Standard anti-static packaging to avoid transit damage
6.2 การรับรอง
| การรับรอง | มาตรฐาน | หมายเหตุ |
| ความปลอดภัยทางไฟฟ้า | ไออีซี 60947-5-1, แอล 508, ซีเอสเอ C22.2 หมายเลข 14, ซีซีซี, อีเอซี | Multi-country safety approval |
| การคุ้มครองสิ่งแวดล้อม | RoHS, REACh, กรีน พรีเมี่ยม | Hazardous substance free |
| UK Market | ยูเคซีเอ | Valid for UK sales |
| ป้องกันการระเบิด | ไม่สามารถใช้ได้ | For general industrial use only |
- กรณีการสมัคร & Industry Guidelines
7.1 สถานการณ์การใช้งานทั่วไป
Motor Control Center (มช): Status monitoring and control circuit expansion
Automatic production line: Motor feedback signal for PLC and HMI display
Water pump control system: Fault alarm and automatic switching
Fan control circuit: Interlock and safety protection signal output
Compressor unit: Remote monitoring and automatic start-stop control
7.2 Industry Application Guide
| อุตสาหกรรม | Operation Feature | คำแนะนำในการเลือก |
| การผลิต | การสตาร์ท-หยุดบ่อยครั้ง, สภาพแวดล้อมที่รุนแรง | Match GVAE20 with GV2/GV3 for stable signal transmission |
| ปิโตรเคมี | High explosion-proof demand, severe working condition | Applied in non-explosion area with certified control cabinet |
| ระบบอัตโนมัติในอาคาร | พื้นที่กะทัดรัด, ติดตั้งง่าย | Front mount saves cabinet internal space |
| การบำบัดน้ำ | Humid and corrosive environment | Adopt high protection grade breakers matched with GVAE20 |
| อุตสาหกรรมไฟฟ้า | มีความน่าเชื่อถือสูง, การดำเนินงานอย่างต่อเนื่อง | Regular contact inspection to ensure steady signal output |
7.3 Application Case
Project: Motor Control Upgrade for Auto Parts Production Line
ความต้องการ: Original circuit only has main circuit protection, lacking remote monitoring and early warning function
สารละลาย: Install GVAE20 on GV2 breakers, connect 2NO contacts to PLC digital input module and HMI system
ผล:
Real-time motor running status monitoring realized
30% downtime reduction via fast fault location
Improved automation level and lower manual inspection cost
- กฎการเลือกด่วน
- ประเภทการติดต่อ: 2NO=GVAE20, 1NO+1NC=GVAE11, convertible contact=GVAE1
- Mounting way: Front=GVAE series, Side=GVAN series
- ความเข้ากันได้: Exclusive for Schneider GV2/GV3 motor circuit breakers
- Current limit: Max 2.5A AC / 1A DC for control circuit
- แรงบิดของสายไฟ: 0.8-1.2 Nm for screw terminals
คอนแทคเตอร์,เบรกเกอร์,อินเวอร์เตอร์พลังงานแสงอาทิตย์,มิเตอร์ไฟฟ้า,แบตเตอรี่พลังงานแสงอาทิตย์


















NH42-63-318x560.png)




