Schneider SXWASPSBX10002 BMS Network Controller

EcoStruxure Building (SpaceLogic AS-P-NLS) อาคาร ระบบอัตโนมัติ เซิร์ฟเวอร์ (BMS Network คอนโทรลเลอร์) with Secure Boot. Designed for HVAC, แสงสว่าง, น้ำเย็น & heat source control, alarm management, trend logging and protocol gateway applications.

✅ Model Code Definition

AS-P: SpaceLogic Automation Server Premium (high-end automation server)

NLS: N = No LON bus; L = Zigbee wireless support; S = Secure Boot firmware verification

การเปรียบเทียบ: AS-P-NL (SXWASPXXX10002) without Secure Boot; AS-P-NLS equipped with anti-tampering firmware authentication.

📌 Hardware Ports

2 × RJ45 10/100 Mbps Ethernet (LAN1/LAN2, dual-port network isolation supported)

2 × RS485 field buses (M-Bus, Modbus RTU compatible)

1 × I/O Bus for SpaceLogic I/O expansion modules

1 × USB Device (ดาวน์โหลดโปรแกรม & การว่าจ้าง)

1 × โฮสต์ USB (USB storage, Zigbee wireless adapter)

📋 ข้อมูลจำเพาะทางเทคนิคหลัก

แหล่งจ่ายไฟ: 24 กระแสตรง

Max power consumption: 10 ว

หน่วยความจำ: 512 เอ็มบี แรม / 4 จีบี แฟลช

Enclosure rating: IP20, การติดตั้งราง DIN

ขนาด: 90(ว) × 114(ชม) × 64(ดี) มม

น้ำหนักสุทธิ: 0.321 กก

อุณหภูมิในการทำงาน: 0 ~ +50 ℃; อุณหภูมิในการจัดเก็บ: -20 ~ +70 ℃

ความชื้น: ≤95% RH, ไม่ควบแน่น

🧩 Protocols & ฟังก์ชั่นหลัก

BACnet IP, BACnet/SC (Secure Connect), Modbus TCP/RTU

Zigbee wireless device integration

Control logic execution, trend logging, alarm management, user access control

Standalone operation or zone controller under upper-level servers; acts as multi-protocol gateway

Secure Boot: prevents firmware tampering, ideal for high-security projects (โรงพยาบาล, ศูนย์ข้อมูล)

⚠️ Product Lifecycle (Critical Information)

End of Order (EOO): 31 ธ.ค 2026

End of Service (EOS): 31 ธ.ค 2029

รุ่นทดแทนที่แนะนำ: SXWASP3XX10001 (AS-P-3 V3 New Generation)

Upgrade highlights for AS-P-3: Gigabit Ethernet port, 3 RS485 ports, dual USB Host ports, ประสิทธิภาพที่สูงขึ้น, fully compatible with EcoStruxure toolchain.

📎 Matching Accessories

TB-ASP-W1: Terminal base

PS-24V: 24 แหล่งจ่ายไฟกระแสตรง

Zigbee USB adapter, SXW series I/O expansion modules

📝 Quick Selection Comparison Table

หมายเลขชิ้นส่วน	Short Name	Secure Boot	LON Bus	Zigbee
SXWASPSBX10002	AS-P-NLS	ใช่	เลขที่	ใช่
SXWASPXXX10002	AS-P-NL	เลขที่	เลขที่	ใช่
SXWASPSBX10001	AS-P-S	ใช่	ใช่	เลขที่

Migration Guidelines: AS-P-NLS (SXWASPSBX10002) → AS-P-3 (SXWASP3XX10001)

Core Tool: Device Administrator – Convert backup set server type (do NOT restore backup directly). Minimum EBO version requirement: EBO 7.0 หรือหลังจากนั้น. Older EBO versions cannot recognize AS-P-3.

เงื่อนไขเบื้องต้น: Offline full backup, field trial first, scheduled downtime, rollback plan prepared.

Program Migration (EBO Project, ตรรกะการควบคุม, Scripts, Licenses)
Backup & Conversion Workflow (Most Critical Step)
Perform a full online backup of the legacy AS-P-NLS (including control programs, trends, สัญญาณเตือน, permissions, gateway settings, TGML graphics). Never restore this backup directly onto AS-P-3.
Open the backup set in Device Administrator, run the Convert backup set server type function to change the target device type from AS-P to AS-P-3. Only converted backups can be downloaded to the new controller.
Most control logic, FBD, ST programs, schedules, alarm strategies and trend configurations remain fully compatible after conversion, no program rewriting required.
Always open the converted project in WorkStation and run a full compile check to eliminate errors and warnings.
Key Compatibility Checks

✅ Standard HVAC, BACnet and Modbus function blocks are fully compatible.

⚠️ Custom third-party drivers, user-defined C-scripts and special driver packages must be validated for AS-P-3 compatibility; older drivers may not work.

Zigbee Compatibility: The original Zigbee USB adapter works on AS-P-3, but the USB port path changes (มรดก: 1 โฮสต์ USB; ใหม่: 2 USB Host ports). Update the USB device path inside the project.

Secure Boot: Certificates and BACnet/SC credentials are retained after conversion; re-export and validate certificates after migration.

❌ Incompatibility Risks:

Legacy AS-P exclusive system variables and status objects
Hardcoded USB/COM port numbers in TGML graphics
TLS version mismatch: AS-P-NLS uses TLS 1.0 while AS-P-3 defaults to TLS 1.3. Email alerts and web access will fail due to handshake errors; adjust mail server TLS settings accordingly.

✅ License Note: The original AS-P software license cannot be migrated directly. Apply for license re-binding with the new AS-P-3 serial number in advance via ชไนเดอร์ license transfer process.

Post-Migration Testing Items
Full project compilation, resolve all errors & warnings
Offline simulation of control sequences, PID loops and interlocks
Verify alarm forwarding, trend recording and event logging
Test TGML graphic access and point read/write permissions
I/O Bus & I/O Mapping (Top Risk Area – Hardware Topology Changed)

Legacy AS-P uses TB-ASP-W1 terminal base with different I/O Bus addressing and power budget. AS-P-3 is an integrated unit without a separate base.

I/O Bus Address Rule Change (Most Common Failure)

Legacy AS-P: Server occupies I/O Bus address 1

AS-P-3: Server is fixed at I/O Bus address 2. I/O modules start from address 3, สูงสุด 32 nodes (สูงสุด 31 I/O devices).

Direct migration will cause I/O address offset, module offline and wrong point readings.

สองโซลูชั่น:

Rearrange the physical I/O Bus topology, reassign addresses following AS-P-3 rules, then cross-check I/O mapping table in the project (ที่แนะนำ).
Modify each I/O module’s bus address inside the project to match physical wiring.

Wiring rule: Install AS-P-3 on the far left of the DIN rail; I/O modules extend rightwards. ตำแหน่ง 1 is reserved and unavailable.

I/O Bus Power Budget

Legacy AS-P base has limited power output; AS-P-3 built-in I/O Bus power: สูงสุด 20 ว. Add an external 30 W I/O bus power supply if the total power consumption exceeds the limit, otherwise modules will drop offline randomly.

Calculate total module power consumption before migration.

I/O Mapping Validation

DI/DO/AI/AO channel definitions remain unchanged; only the I/O Bus address is updated.

Verify every item after download: module number, bus address, channel number, forced values, channel inversion and filter parameters.

SXW series I/O modules are fully interchangeable between legacy AS-P and AS-P-3; no hardware replacement needed.

III. การกำหนดค่าเครือข่าย (Ethernet Ports, อาร์เอส485, BACnet, เกตเวย์)

Ethernet Port Comparison

Legacy AS-P-NLS: 2 × 10/100 Mbps LAN (LAN1/LAN2)

AS-P-3: Port1 (10/100/1000 กิกะบิต), Port2 & Port3 (10/100 เมกะบิตต่อวินาที). 3 ports total, supports RSTP and isolated private subnets.

Major Pitfall: Port numbering and subnet roles have changed.

การวางแผนทรัพย์สินทางปัญญา: Keep the same Device Name and BACnet Device ID to avoid reconfiguration on upper BMS and third-party integration systems.
Port Role Reassignment:

Port1 = Main WAN (BMS backbone network)

Port2 / Port3 = WAN or Private Network (กำหนดได้)

All static routes, BACnet IP interfaces and gateway bindings previously assigned to LAN1/LAN2 must be re-bound to the new AS-P-3 port numbers, otherwise BACnet IP communication and cross-subnet routing will break.

BACnet Settings

BACnet IP and BACnet/SC protocols are compatible. Certificates are preserved after backup conversion, but TLS 1.3 is enabled on AS-P-3; BACnet/SC clients must support TLS 1.3.

Re-scan BACnet routers, BBMD and external device subscriptions after migration.

RS485 Serial Ports (COM Ports)

Legacy AS-P: COM A, COM B (2 RS485 ports)

AS-P-3: COM A, COM B, COM C (3 RS485 ports)

Modbus RTU / MS/TP programs referencing COM A/B do not require editing; only re-terminate field wiring to the new terminal block.

Bus biasing and termination resistors: AS-P-3 has different built-in biasing characteristics. Retest bus waveform and adjust termination resistors on long-distance MS/TP buses to eliminate intermittent communication loss.

Additional Network Services

Recheck NTP, DNS, static routes, VPN and SNMP settings; re-bind all network objects to the correct physical ports.

ฮาร์ดแวร์, สายไฟ & Installation Differences (Field Implementation)
พาวเวอร์ซัพพลาย: Legacy AS-P requires separate PS-24V power module; AS-P-3 has integrated power supply, directly powered by 24 VAC / 24~30 โวลท์ดีซี. The external PS-24V can be removed from the cabinet.
Mechanical Size: Legacy AS-P + ฐาน + แหล่งจ่ายไฟ; AS-P-3 integrated body matches the overall size of legacy AS-P plus PS-24V. DIN rail mounting position is interchangeable, but terminal layout differs – do not reuse existing pre-wired terminal plugs; re-crimp all field wires.
อินเทอร์เฟซ USB: มรดก: 1 Mini-B debug + 1 USB-A Host; ใหม่: 1 USB-C debug + 2 USB-A Host. After plugging the Zigbee adapter into the new USB Host, update the USB instance path inside the project.
การกระจายความร้อน: AS-P-3 has higher power consumption. Install horizontally on DIN rail with sufficient top & bottom ventilation; avoid dense stacking.
Step-by-Step Migration Procedure (Minimize Downtime Risk)
Before shutdown: Create full project backup, export I/O mapping table, network parameters, BACnet device list, Modbus point list and Zigbee device inventory; keep hard copies.
Upgrade EBO WorkStation to V7.0+, and install the matching Device Administrator version.
Convert the backup to AS-P-3 format, compile the project and complete offline simulation testing.
Replace the controller hardware inside the cabinet, rewire I/O Bus, 24วี พาวเวอร์, RS485 buses, Ethernet and Zigbee adapter.
Flash the latest firmware to AS-P-3, import the converted backup and activate the software license.
Power up step by step: First I/O Bus, then RS485 field buses, finally the backbone Ethernet network.
Full point verification: I/O channels, field bus communication, BACnet, โมดบัส, สัญญาณเตือน, trends, graphics and Zigbee sub-devices.
24-hour continuous trial run. Keep the original AS-P-NLS as rollback spare hardware; do not remove it immediately.
Common Post-Migration Troubleshooting
I/O modules offline: Wrong I/O Bus address (server address changed from 1 ถึง 2), incorrect physical topology, or total bus power exceeds 20 W limit.
Intermittent Modbus/MS/TP communication: Improper bus biasing or termination resistors, or COM port binding mismatch.
Upper BMS cannot read BACnet points: WAN/Private subnet misconfiguration, BBMD error or duplicate BACnet Device ID.
Zigbee devices offline: USB Host instance path not updated in the project.
Email notification failure: TLS version incompatibility (mail server does not support TLS 1.3).
Backup restore error: Direct restore without running the Convert backup set server type tool.

Full Model List of the Series

1st Generation AS-P (ยกเลิก, with TB-ASP-W1 Base)

Standard HVAC Models

Short Model	หมายเลขชิ้นส่วน	LON Bus	Zigbee	Secure Boot	หมายเหตุ
AS-P	SXWASPXXX10001	ใช่	เลขที่	เลขที่	Basic model with LON
AS-P-S	SXWASPSBX10001	ใช่	เลขที่	ใช่	Secure Boot + LON
AS-P-NL	SXWASPXXX10002	เลขที่	ใช่	เลขที่	No LON, Zigbee wireless
AS-P-NLS	SXWASPSBX10002	เลขที่	ใช่	ใช่	No LON + Zigbee + Secure Boot
AS-P-SBA	SXWASPSBX10A01	ใช่	เลขที่	ใช่	BAA Buy American Act compliant

UL864 Smoke Control (SMK) Fire Models

Short Model	หมายเลขชิ้นส่วน	LON	Zigbee	Secure Boot
AS-P-SMK	SXWASPXXX1S001	ใช่	เลขที่	เลขที่	Smoke control firmware
AS-P-NLS-SMK	SXWASPSBX1S002	เลขที่	ใช่	ใช่	Smoke control + Zigbee + Secure Boot

Terminal Bases (อุปกรณ์เสริมบังคับ)

TB-ASP-W1: SXWTBASW110002 (Standard projects)
TB-ASP-W1-BAA: SXWTBASW110A02 (BAA-compliant projects)

2nd Generation AS-P-3 V3 (เปลี่ยนใหม่, Integrated Unit, No Base Required)

All models include Secure Boot; EBO V7.0+ required.

Short Model	หมายเลขชิ้นส่วน	LON Bus	RS485 Ports	Ethernet Ports	การเปลี่ยนมรดก
AS-P-3	SXWASP3XX10001	เลขที่	3	1 กิกะบิต + 2 Fast Ethernet	AS-P-NL / AS-P-NLS (SXWASPSBX10002)
AS-P-L-3	SXWASPL3X10001	ใช่	2	1 กิกะบิต + 2 Fast Ethernet	AS-P / AS-P-S (LON retained)

ความแตกต่างที่สำคัญ: AS-P-3 has one extra RS485 port; AS-P-L-3 keeps LON bus with one fewer RS485 port.

การแยกย่อยการเข้ารหัสโมเดล (SXWASPSBX10002)

SXWASP = SpaceLogic AS-P Automation Server
6อักขระตัวที่: S = Secure Boot enabled; X = No Secure Boot
7อักขระตัวที่: B = No LON bus; L = LON bus enabled
8อักขระตัวที่: X = No Zigbee; L = Zigbee enabled
คำต่อท้าย 10001/10002 = Version & compliance variant; S = SMK smoke control firmware

End-of-Life Replacement Mapping Table