Delta DVP28SV11T2 High-Performance Slim-type PLC

DVP28SV11T2

DVP: دلتا بي ال سي series code

28: إجمالي نقاط الإدخال/الإخراج 28 نقاط (16DI+12DO)

SV: High-performance main unit of SV series; SV2 denotes second-generation hardware (suffix T2 = SV2)

11: مصدر طاقة DC24V

ت: Transistor output NPN (sink type)

2: Second-generation SV2 hardware version, supporting left-side high-speed expansion port

مواصفات الأجهزة الأساسية

برمجة

برامج البرمجة: WPLSoft / ISPSoft, with COMMGR communication manager

Supported features: 4-level password protection, program backup, battery-free real-time clock, 16-channel external interrupt.

التطبيقات النموذجية

Servo positioning, XY manipulators, ملصقات, آلات التعبئة والتغليف, cutting equipment, آلات النسيج, and other equipment requiring multi-axis pulse motion control.

Distinction of Models in the Same Series

DVP28SV11T: First-generation SV, 16K-step program, without left-side high-speed expansion port

DVP28SV11T2: SV2 second-generation, 30K-step program, with left-side high-speed expansion port

DVP28SV11R2: Relay-output version

DVP28SV11S2: PNP transistor-output version

Second-hand Inspection Checklist

1. Power-on test: POWER indicator steady ON; check status of RUN/ERROR/BAT-LOW indicators; low-battery alarm.
2. I/O test: Force ON/OFF to verify all input and output points.
3. High-speed pulse test: Test Y0-Y3 pulse output up to 200kHz; verify high-speed counter reception on X0/X1.
4. اختبار التواصل: Program upload/download via RS232 and RS485; Modbus read-write test.
5. Expansion port inspection: Check left-side and right-side expansion connectors for oxidation and intact pins.

Alternative References

دلتا native alternatives: DVP28SV11S2 (بنب); DVP28SE211T (SE2 new generation, with Ethernet port)

البديل المحلي: Inovance H2U-1616MT-XP (200نبض كيلو هرتز, 4-axis)

Programming Software for Delta DVP28SV11T2 (SV2 Series)

This unit belongs to second-generation DVP-SV2 PLC; two official software packages are supported:

1. ISPSoft (الموصى بها للمشاريع الجديدة)

أحدث نسخة: V3.24 and above

Mandatory companion: COMMGR communication manager, handles serial/USB communication connection

Supported IEC61131-3 languages: إل دي (مخطط السلم), شارع (نص منظم), FBD (مخطط كتلة الوظيفة), SFC (Sequential Function Chart); full SV2 motion instructions, الاستيفاء, high-speed positioning; modular POU programming, simulation, online monitoring, ترقية البرامج الثابتة.

OS: Win7/10/11 (64-قليل)

2. WPLSoft (Legacy software for existing project maintenance)

إصدار: V2.52, traditional Delta DVP programming software, mainly supports ladder diagram and instruction list, no Structured Text support

Suitable for reading backup programs from legacy equipment and simple logic; inferior to ISPSoft for complex motion-control functions.

⚠️ Note: DIADesigner does NOT support DVP28SV11T2. DIADesigner is for high-end SV3, AS/AH series PLCs.

Programming Cables

For the front-panel Mini-DIN8 RS232 port of DVP28SV11T2:

1. Delta original USB-DVP programming cable (USB to Mini-DIN8)
2. RS232-to-Mini-DIN8 cable is also acceptable; program download is available via COM2 RS485 as well.

Software Selection Guidance

Servo positioning, circular interpolation, complex processes: ISPSoft + COMMGR

Legacy equipment with WPLSoft-format project files: Maintain with WPLSoft.

Communication Protocols for Delta DVP28SV11T2 (SV2)

On-board hardware: COM1-RS232 (Mini-DIN8), COM2-RS485 terminal block. No native Ethernet or CANopen; fieldbus functions require left-side expansion modules.

Protocols Supported by On-board Serial Ports

1. مودبوس ار تي يو / Modbus ASCII (Most widely used)

Available on COM1(RS232) and COM2(RS485); supports both Master and Slave modes

Max baud rate 115200bps; configurable data bits, parity, stop bits

التطبيقات: Connect to HMI, العاكسون, servos, meters and third-party Modbus devices.

2. Delta proprietary protocol (PLCLink)

Data exchange among multiple DVP-SV2/SA2/SS2 PLCs via RS485 networking.

3. Program download protocol

COM1 RS232: ISPSoft/WPLSoft program upload/download, online monitoring

Program download and monitoring are also supported over COM2 RS485.

Factory default serial parameters: 9600, 7, ه, 1 (9600نقطة أساس, 7-data-bit, even parity, 1 توقف قليلا)

Additional Fieldbus Protocols via Left-side High-speed Expansion Modules (Hardware add-on only, not built-in)

Use the dedicated left-side high-speed slot with corresponding communication modules:

DVPCOPM-SL: CANopen master module, CANopen DS301 compliant, for CANopen servo/drive connection

DVPNET-SL: Ethernet module, supports Modbus-TCP (Master/Slave)

DVPDP-SL: Profibus-DP slave module

DVPDNM-SL: DeviceNet module

Port Function Summary

المزالق المشتركة

1. DVP28SV11T2 has no built-in Ethernet or CAN interface. Expansion modules must be purchased separately.
2. كوم1(RS232) can only operate as Modbus Slave. Modbus Master function is exclusively for COM2(RS485).
3. PLCLink works only between Delta DVP-series PLCs; incompatible with third-party hardware.

Complete Installation Guide for Delta DVP28SV11T2 (ISPSoft + COMMGR)

ISPSoft is preferred for DVP28SV11T2(SV2). COMMGR is mandatory for communication; program download will fail without it.

Supported OS: Win10 / Win11 64-bit. Download installation packages from Delta Industrial Automation official website.

التحضير قبل التثبيت

1. Uninstall old versions of ISPSoft and COMMGR; mixed versions cause communication failures.
2. Right-click installer → Run as administrator (critical for Win11; avoids installation errors and driver failure).
3. Temporarily disable antivirus / Windows Defender to prevent component interception.
4. Ensure .NET Framework4.5 is installed (included in modern Windows; download from Microsoft if missing).

Two Installation Procedures

Method A: COMMGR bundled inside ISPSoft installer (مُستَحسَن)

1. Unzip ISPSoft archive and run Setup.exe.
2. Select Chinese language, follow on-screen prompts; keep the [COMMGR] component checked, do not uncheck it.
3. Customize install path; avoid Chinese-character directories on C drive (على سبيل المثال. د:\Delta\ISPSoft).
4. Complete installation and reboot PC as prompted.

⚠️ If COMMGR was unchecked during setup, download and install COMMGR separately.

Method B: Separate installation

1. Install COMMGR (Communication Manager) أولاً.
2. Install ISPSoft programming software afterwards.

Post-installation Configuration (Program editing ≠ download capability; COMMGR channel setup is required)

1. Close ISPSoft first, launch COMMGR from start menu (icon appears in system tray).
2. Click [يضيف]

Driver name: English characters only, على سبيل المثال. DVP_SV2 (No Chinese characters or spaces)

نوع الاتصال:

Delta USB programming cable: Select USB

USB-to-RS232/485 adapter: Select Serial Port, confirm COM number in Windows Device Manager.

3. Parameters matching PLC factory defaults: 9600, 7, ه, 1, Station No.1
4. Confirm configuration, select this channel and click [يبدأ]. Status START means channel is ready.
5. Open ISPSoft, create new project, حدد النموذج: DVP-SV2 → DVP28SV11T2
6. قائمة طعام [أدوات] → [إعدادات الاتصال], select the pre-configured COMMGR channel to go online, upload or download programs.

Alternative Legacy Software WPLSoft (For maintenance-only)

Not recommended for new projects; lacks ST language and advanced motion interpolation instructions.

1. Install WPLSoft V2.53, run as administrator.
2. WPLSoft also relies on COMMGR; communication configuration follows identical steps above.

استكشاف الأخطاء وإصلاحها الشائعة

1. Gray online button: COMMGR is not running, channel status is not START.
2. COM port not found: Install driver for USB-to-serial chip (CH340 / FT232); no yellow exclamation marks in Device Manager.
3. Win11 installation errors: Always run as administrator, avoid Chinese-character install paths, disable security software temporarily.
4. Communication errors: Double-check baud rate, parity setting and PLC station number. SV2 factory setting: 9600-7-E-1

Hint for New DVP28SV11T2 Project

ISPSoft New Project → Series DVP-SV2 → select DVP28SV11T2. The software automatically applies hardware parameters: 30K-step program capacity, 4-محور إخراج النبض 200 كيلو هرتز.