Hakko MONITOUCH V810iCN-080 واجهة المستخدم البشرية - المقاولين,قاطع الدائرة,الاستشعار,التشفير,بلك,محول

ويشات: +86-13184948252 واتس اب: 0086-13811255435 بريد إلكتروني: كينت@bestcontactor.com

عن اتصال |

Hakko MONITOUCH V810iCN-080 واجهة المستخدم البشرية - المقاولين,قاطع الدائرة,الاستشعار,التشفير,بلك,محول

بلك/

Hakko MONITOUCH V810iCN-080 واجهة المستخدم البشرية

The V8 series HMI is discontinued. It is widely used on legacy equipment (على سبيل المثال, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) ج: Standard VGA (640×480) economy version N: Analog resistive touch ...

  • تفاصيل المنتج

The V8 series واجهة المستخدم البشرية توقف. It is widely used on legacy equipment (على سبيل المثال, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

تعريف رمز النموذج

V810: V8 series, 10.4-inch model

i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

ج: Standard VGA (640×480) economy version

ن: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

مواصفات الأجهزة الأساسية

عرض: 10.4″ شاشات الكريستال السائل الملونة TFT, 640×480 VGA, 65,536 الألوان

Touch type: Analog resistive touch

الإضاءة الخلفية: قاد, rated service life approx. 70,000 ساعات

ذاكرة: 4.5MB FROM for screen storage; 128كيلو بايت سرام (for recipes & alarm logs)

Front panel protection: IP65 (with original waterproof gasket), rear side IP20

الأبعاد الشاملة: 303.8 × 231.0 × 69.0 مم

Panel cutout size: 289.0 × 216.2 مم (+0.5/-0 tolerance)

Rear Interface List

  1. LAN RJ45: 10/100Mbps Ethernet
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (CN1): RS232C / RS422/485
  4. يو اس بي-أ (Host), USB-B (Programming slave port)
  5. CF card slot (legacy CF card, not SD card)
  6. 24VDC power terminal block

ملحوظة: V810iCN does NOT support GU video/RGB optional modules

برمجة & تواصل

برامج البرمجة: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: ربط ما يصل إلى 8 PLCs of different brands simultaneously (ميتسوبيشي, سيمنز, اومرون, دلتا, أجهزة التحكم في درجة الحرارة, العاكسون, إلخ.)

Supported functions: إنذار, الرسوم البيانية الاتجاه, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs

خيارات الاستبدال (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-بوصة, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Important reminder: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

الأخطاء الشائعة & نصائح الصيانة

Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card

قطع غيار: Touch panel, الإضاءة الخلفية LED, لوحة الطاقة, CF card, backup battery for SRAM

Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / فوجي اليكتريك) قائمة النماذج الكاملة

The entire V8 series is end-of-life (موسوعة الحياة).

شرح اللاحقة

i: Built-in LAN Ethernet port; no i = no Ethernet port

س: High-performance model, supports GU RGB video optional modules

ت: Mid-range model

ج: Standard economy model (V810iCN belongs to this branch)

م: Simplified model exclusive to V806

الفصل: 7.5-inch handheld type

X: 15-inch XGA high-end model

ن: Analog resistive touch; د / 080: مصدر طاقة DC24V

5.7-بوصة | V806 Series (320× 240 كيو في جي ايه)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (تيار مستمر 24 فولت)

7.5-بوصة | Handheld Model V808CH

V808CH / V808iCH

8.4-بوصة | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (تيار مستمر 24 فولت)

10.4-بوصة | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (Economy version; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (متوسطة المدى, supports GU optional units)

V810S / V810iS (عالية الأداء, supports GU video/RGB modules)

Suffix variants: ن (لمسة مقاومة), D/080 (تيار مستمر 24 فولت), على سبيل المثال, V810iCN, V810iTN, V810iSN

12.1-بوصة | V812 Series (800×600 SVGA)

V812S / V812iS (عالية الأداء, supports GU video modules)

15-بوصة | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; إيثرنت + video input)

Function Comparison Table

Model BranchBuilt-in LAN (i)GU Video Module Supportتحديد المواقع
V8xxC (V810iC/V808iC)Optional i❌اقتصاد (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅عالية الأداء
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

برمجة & استبدال

برامج البرمجة: V-SFT5 / V-SFT6

Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-بوصة, تيار مستمر 24 فولت, إيثرنت مدمج, economy grade, no video expansion port, cutout size: 289.0 × 216.2 مم

  1. Original Brand Upgrade (الاختيار الأول: Project Migration, No Cutout Modification)

(1) V10 Series (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (Top Pick)

✅ Identical panel cutout; لا حاجة لتعديل الخزانة. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) V9 Series (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

نفس الخطوط العريضة & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-بوصة, تيار مستمر 24 فولت, إيثرنت + RS485/232 ports

وينتيك: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / شينجي: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

عيب: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

جدول مقارنة الاختيار

نموذج الاستبدالNo Cutout ModificationDirect Project MigrationVideo Module Supportحالة التوريد
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌توقف, only stock/used
V810iTN/080✅✅✅توقف, secondhand only
Domestic 10.4″ واجهة المستخدم البشريةAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. Communication protocols (Mitsubishi MC, سيمنز S7, Omron Hostlink, إلخ.) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

السابق:

التالي:

ترك الرد

ترك رسالة