Schneider iC65N 2P 32A Miniature Circuit Breaker

Standard designation: iC65N 2P C32A (commonly abbreviated as IC65N-2P32A in the market; C-curve by default)

Material codes: A9F18232 (منحنى C); A9F17232 (B-curve); A9F19232 (منحنى D)

✅تعريف النموذج

iC65: سلسلة Acti9 قاطع الدائرة المصغرة

ن: Breaking capacity class 6kA (iC65H=10kA, iC65L=15kA)

2ص: 2-القطب, simultaneous disconnection of phase and neutral for protection

32أ: Rated current In=32A

منحنى C (الأكثر شيوعا): Magnetic trip 5~10In, مناسبة للإضاءة, socket outlets and general power loads; B-curve 3~5In (low-voltage circuits); D-curve 10~20In (المحركات, transformers with inrush current)

📋 المواصفات الكهربائية الأساسية

Rated voltage Ue: تيار متردد 230/400 فولت, 50/60هرتز

Rated short-circuit breaking capacity Icn: 6kA @400V AC (GB10963.1 / IEC60898-1)

حماية: رحلة حرارية مغناطيسية (الزائد + short-circuit dual protection), disconnector function

تصاعد: DIN35mm rail, width 36mm (2 وحدات)

Insulation voltage Ui: 500V; Impulse withstand voltage Uimp: 6كيلو فولت

Current limiting class: فصل 3

Terminal protection IP20, IP40 when installed inside enclosure; سي سي سي, شهادة CE

الأسلاك: من الأعلى إلى الأسفل / bottom-in top-out both acceptable

📌 التطبيقات النموذجية

Main incoming breaker for residential buildings, single-phase distribution circuits in shops

إضاءة, دوائر المقبس, ordinary fans and water pumps (منحنى C)

Can be assembled with Vigi iC65 residual current add-on block to form RCBO

🔄 Replacement Information

نموذج السلف: C65N 2P32A (توقف)

شنايدر equivalent upgrade: iC60N 2P C32A (A9F74232)

ما يعادلها المحلية: Chint NXB-63 2P C32A, Delixi DZ47s 2P C32A

⚙️ Optional Accessories (compatible within series)

Vigi iC65 RCD add-on block (30mA Type A)

iMX shunt trip release, iMN undervoltage release, iOF auxiliary contact, iSD fault alarm contact

Differences between iC65N series and iC60N series

iC65N: China domestic version (سي سي سي); iC60N: International general version (CE/IEC). Same outline, module width and basic tripping characteristic; 6kA breaking capacity per IEC60898. Directly interchangeable on DIN rail. But they differ in certification, applicable standards, contact status indication, available trip curves, accessory system and material codes.

1. تحديد المواقع في السوق & شهادة

iC65N: Model dedicated for Chinese market, شهادة CCC, standard GB10963.1 (identical to IEC60898-1). No separate CE for overseas acceptance, not recognized for export projects.

Material prefix: A9F18xxxx (منحنى C). مثال: 2P C32A = A9F18232

iC60N: Global Acti9 international version, CE+IEC certified, compliant with IEC60898-1 (household distribution) + IEC60947-2 (industrial disconnector). Preferred for export panels, overseas complete sets and foreign-invested projects.

Material prefix: A9F74xxxx (منحنى C). مثال: 2P C32A = A9F74232

2. كسر القدرة (الفرق الرئيسي)

iC65N N grade: 6kA @400V (IEC60898 only)

iC60N N grade: 6ال (IEC60898) / 10ال (IEC60947 industrial condition), higher breaking capacity under industrial standard

3. Available Trip Curves

iC65N: ب / ج / د

iC60N: ب / ج / د / ك / ز / ماجستير (K for transformers, Z for electronic circuits, MA fixed magnetic trip for motors; wider selection for industrial control)

4. Front Panel Indication (VisiSafe / VisiTrip)

iC65N: Simplified China version. Green handle = open position; red marker for fault trip

iC60N: Full VisiSafe (visible true contact separation) + VisiTrip (independent red window for fault trip). Widely required by overseas safety specifications and site verification

5. توافق الملحقات

Accessories look identical but have separate material code ranges. Strongly recommended to match accessories within the same series

iC65: iOF / iSD / iMX / iMN, Vigi iC65 RCD add-ons (China A9 domestic accessories)

iC60: Vigi iC60, overseas auxiliary / رحلة تحويلة; compatible with PowerTag smart energy monitoring modules (iC65 generally not fitted with overseas smart modules)

6. البعد & قابلية التبادل

✅ Same module size: 1P=18mm, 2P=36mm, direct DIN35 rail swap, wiring from top or bottom allowed

⚠️ Important risk note: iC65N preferred for domestic cabinets in China; for export, foreign-owned projects or CE certificate requirement, select iC60N. iC65N cannot be substituted, overseas inspectors do not accept iC65N certificates.

7. Selection Comparison Table

8. Reference for your model 2P32A

iC65N 2P C32A: A9F18232 (regular stock for China domestic)

iC60N 2P C32A: A9F74232 (for export / foreign invested projects)

1. Prefix Coding Rule

1) iC65N (China CCC version)

B-curve: A9F17xxxx

منحنى C: A9F18xxxx (السائدة)

منحنى D: A9F19xxxx

5th digit = pole count: 1=1ف; 2=2ف; 3=3P; 4=4ف

Last two digits = rated current: 01=1أ, 02=2A…32=32A, 63=63A

2) iC60N (International CE version)

B-curve: A9F73xxxx

منحنى C: A9F74xxxx (mainstream for export)

منحنى D: A9F75xxxx

القطب & current coding rule identical to iC65N, one-to-one mechanical interchange

1. iC65N Full Model & Material Code List (ب/ج/د, 1ف/2ف/3ف/4ف, 1~63A)

(1) 1P Single Pole

(2) 2P Two Pole (your 2P32A here)

(3) 3P Three Pole

(4) 4P Four Pole

ثالثا. iC60N Full Model & Material Code List (ب/ج/د,1ف/2ف/3ف/4ف,1~63A)

Coding Reference

B-curve: A9F73xxx

منحنى C: A9F74xxx (mainstream for export)

منحنى D: A9F75xxx

(1) 1ص

(2) 2ص (match your 2P32A)

(3) 3ص

(4) 4ص

1. Direct Replacement for your 2P32A
2. Domestic China project requiring CCC: iC65N 2P C32A → A9F18232
3. يصدّر / foreign-invested project requiring CE: iC60N 2P C32A → A9F74232
4. Matching RCD Add-on Blocks (DO NOT cross-series mix)

For iC65N: Vigi iC65 residual current add-on (A9V52xxx)

For iC60N: Vigi iC60 residual current add-on (A9V53xxx)