Schneider LC1N2501 AC Contactor

LC1N2501 is a 3-pole 25A AC Contactor of Schneider Electric EasyPact D3N Series. It is standard configured with 3 normally open main contacts + 1 normally closed auxiliary contact. It is suitable for 11kW / 380V motor control under AC-3 duty, widely used in industrial automation and motor control circuits, featuring high reliability and flexible installation.

1. تعريف الجزء النموذجي

Complete Model Examples:

LC1N2501M5N (220لفائف التيار المتردد V, 50هرتز)、LC1N2501B5N (24لفائف العاصمة)

2. معلمات المواصفات الأساسية

3. قائمة الملحقات & Mounting Parts

4. منافس & ما يعادلها عبر العلامات التجارية

5. إرشادات الاختيار & Replacement Solutions

5.1 Key Selection Parameters

5.2 توصيات الاستبدال

Current rating mismatch:

Motor power ≤7.5kW: Select LC1N1801 (18أ)

Motor power 15kW: Select LC1N3201 (32أ)

Insufficient auxiliary contacts:

Add LANN series auxiliary contact block, expandable up to 2NO+2NC maximum

Different control voltage:

24التحكم بالتيار المستمر: LC1N2501B5N

380V AC control: LC1N2501Q5N

Higher performance required:

Choose LC1D2501 (سلسلة تيسيس د), mechanical life 10 مليون دورة, الحياة الكهربائية 2 مليون دورة, stronger vibration resistance

Budget limited:

Adopt domestic alternatives such as Chint CJX2-2501, Delixi CJX2S-2501; similar performance with price reduced by about 30-50%

5.3 Application Precautions

1. Confirm coil voltage matches control circuit before installation to avoid coil burnout.
2. Fasten main circuit wiring with recommended torque 1.85N·m to prevent overheating and poor contact.
3. When directly plugging with LRN series thermal relay, ensure complete latch locking to prevent loosening by vibration.
4. Reversible control circuit must be equipped with LA9D09978C mechanical interlock to prevent phase-to-phase short circuit.
5. It is recommended to parallel surge suppressor at both ends of the coil to protect PLC/relay contacts in control circuit.
6. When ambient temperature exceeds 40°C, derate rated current (10% reduction per additional 10°C rise).
7. Regularly check contact ablation; replace contactor when main contact wear exceeds 1mm.
8. سيناريوهات التطبيق النموذجية

Direct starting control of three-phase asynchronous motor (≤11kW/380V)

Start-stop control for fans, مضخات المياه والآلات العامة

Electrical control for compressors, conveyors and industrial equipment

Compressor control for air conditioning and refrigeration systems

Lighting and ventilation system control in building electrical systems

Motor control circuits for automated production lines

Auxiliary motor control for machine tool equipment

Output switching control for photovoltaic inverters and UPS power supplies

Complete Model List of Schneider LC1N Series (EasyPact D3N) المقاولين

LC1N Series is Schneider Electric EasyPact D3N 3-pole AC contactor, replacing the original LC1E Series. It is designed for AC-3 motor control, covering current ratings from 6A to 95A, with multiple auxiliary contact configurations and coil voltage options. Supports DIN rail or screw mounting with IP20 ingress protection.

1. Model Coding Rules

مثال النموذج الكامل:

LC1N2501M5N (25أ, 1نورث كارولاينا, 220V AC 50Hz)

2. Full Current Rating & Basic Model Matrix

2.1 Standard Auxiliary Configuration (01/10)

2.2 Special Auxiliary Configuration (11/22/00)

3. Complete Coil Voltage Options

3.1 AC Coil Voltage Code

3.2 DC Coil Voltage Code

4. Common Complete Model Combinations

5. Selection Reference Table

5.1 Current Rating vs Motor Power (AC-3/380V)

5.2 Auxiliary Contact Expansion Options

6. Quick Model Selection Guide
7. Confirm current rating: Select according to motor power (Under AC-3 duty, contactor rated current ≥ motor rated current).
8. Select auxiliary contacts: 01(1نورث كارولاينا) for stop control; 10(1لا) for self-locking; 11(1لا + 1NC) for reversible control.
9. Match coil voltage: Consistent with control circuit voltage (220V AC common; 24V DC for safety occasions).
10. Frequency selection: Domestic standard 50Hz(شفرة 5); Export equipment use universal 50/60Hz(شفرة 7).
11. Accessory configuration: Motor control must match LRN thermal relay; Reversible control requires LA9D mechanical interlock.
12. Common Model Replacement Table