المقاولين,قاطع الدائرة,العاكس للطاقة الشمسية,عداد كهرباء,البطاريات الشمسية
Model Breakdown & تعريف
| الجزء النموذجي | وصف |
| VDM | رمز سلسلة المنتج: ELAU PacDrive MC-4 series servo drive module |
| 1 | Hardware version: 1st-generation hardware design |
| د | Drive type: Digital Servo Drive module |
| 10 | التصنيف الحالي: 10أ (continuous output current) |
| أأ | Configuration code: التكوين القياسي, without expansion modules |
| 0 | Version / Option: النسخة الأساسية, no special options |
Full Model Equivalent: VDM01D10AA00 = MC-4/11/10/400, Schneider ELAU PacDrive 10A servo drive.
رقم الطلب: 13130247
- المواصفات الفنية الأساسية
| فئة | Technical Data | ملاحظات |
| المعلومات الأساسية | ||
| ماركة / مسلسل | شنايدر إلكتريك / ELAU PacDrive MC-4 | Originally ELAU products, now affiliated with Schneider Automation Division |
| نوع المنتج | Compact servo drive module | Integrated into PacDrive motion control system |
| Compatible Motor | 3-phase Permanent Magnet Synchronous Motor (PMSM) | Matched power: تقريبا. 0.75كيلوواط (400نظام الخامس) |
| المعلمات الكهربائية | ||
| Input Voltage | 3-phase AC 380V(-10%)~480V(+10%) | Wide voltage range for global industrial power grids |
| Power Frequency | 48~62Hz | Compatible with grid frequencies in different regions |
| Rated Output Current | 10أ (continuous) | Marked by “10” in model, 250% overload capability |
| Peak Output Current | 20أ (short-time) | Meets dynamic load requirements |
| Control Voltage | تيار مستمر 24 فولت(-15%/+25%) / 1أ | External control power supply, independent power supply required |
| استهلاك الطاقة | تقريبا. 12دبليو | Internal circuit power loss |
| أداء التحكم | ||
| Control Mode | مكافحة ناقلات الأمراض / Servo Control | High-precision position / سرعة / torque control |
| واجهة التشفير | Integrated SERCOS III | High-speed real-time motion control bus |
| بروتوكول الاتصالات | SERCOS, بروفيبوس, يمكنفتح | Supports mainstream industrial protocols |
| Dynamic Response | عالية جدًا (cycle time up to 100μs) | Suitable for high-precision positioning and multi-axis synchronization |
| Automatic Motor Identification | Supported | Auto recognition of motor parameters to simplify commissioning |
| I/O Interface | ||
| الإدخال الرقمي | 8 القنوات | 24في العاصمة, optocoupler isolation |
| الإخراج الرقمي | 8 القنوات | 24في العاصمة, 0.5A per channel, optocoupler isolation |
| المدخلات التناظرية | 2 القنوات (0-10V) | 12-قرار قليلا, for speed / torque reference |
| الإخراج التناظري | 2 القنوات (0-10V) | 12-قرار قليلا, for status monitoring |
| Physical Characteristics | ||
| أبعاد (العرض × الارتفاع × العمق) | 22mm×124mm×126mm | Ultra-slim design to save cabinet space |
| وزن | تقريبا. 0.2كجم | Lightweight for easy installation |
| نوع التركيب | تركيب السكك الحديدية DIN | Standard 35mm rail, dense installation available |
| طريقة التبريد | Internal fan cooling | Ensure stable operation under high load |
| فئة الحماية | IP20 | Suitable for cabinet installation |
| درجة حرارة التشغيل | 0℃ ~ 55℃ | Standard industrial ambient temperature |
| درجة حرارة التخزين | -25℃ ~ 70℃ | Wide temperature storage for transportation and warehousing |
| Safety Features | ||
| الشهادات | م, أول, وكالة الفضاء الكندية | Compliant with international safety standards |
| Fault Protection | التيار الزائد, الجهد الزائد, انخفاض الجهد, ارتفاع درجة الحرارة, ماس كهربائى | Comprehensive protection for drive and motor |
| وظيفة السلامة | Optional Safe Torque Off (ستو) | Compliant with SIL 3 safety level |
- Accessory List
| اسم الملحق | نموذج | غاية |
| Power Cable | Custom | 3-phase main power connection (380-480الخامس و) |
| Control Cable | Custom | DC 24V control power connection |
| Motor Cable | Custom | Connection between drive and servo motor (قوة + encoder) |
| SERCOS Bus Cable | Special type | Communication connection with PacDrive controller |
| Heat Sink | Standard equipped | Auxiliary heat dissipation to improve cooling efficiency |
| Mounting Rail | Standard 35mm | Fixed installation for servo drive |
| Instruction Manual | Electronic version | Guidance for installation, commissioning and maintenance |
| Firmware Update Tool | Dedicated software | Drive firmware upgrading |
- Competitor & Cross-Brand Replacement List
| ماركة | مسلسل | نموذج | التصنيف الحالي | الاختلافات الرئيسية | التوافق البديل |
| شنايدر | ليكسيوم 62 | LXM62DD10M3X | 10أ | جيل جديد, EtherCAT supported, upgraded performance | Best replacement (Official Schneider upgrade) |
| سيمنز | سيناميكس S120 | 6SL3120-1TE21-0AA3 | 10أ | PROFINET IRT supported, integrated safety functions | عالي (control program modification required) |
| Beckhoff | AX5000 | AX5103 | 10أ | EtherCAT based, PC-based control | واسطة (control system replacement required) |
| ميتسوبيشي | MR-J4 | MR-J4-10A | 10أ | SSCNET III/H supported, فعالة من حيث التكلفة | واسطة (communication protocol difference) |
| باناسونيك | MINAS A6 | MBDHT2510E | 10أ | Smaller size, سعر منخفض | قليل (poor system compatibility) |
- الميزات الوظيفية & سيناريوهات التطبيق
الوظائف الأساسية
- High-precision Motion Control: Supports position, speed and torque control modes for complex trajectory motion.
- Multi-axis Synchronization: Real-time multi-axis synchronization via SERCOS bus; supports electronic gear, cam synchronization and other functions.
- Optimized Dynamic Response: Ultra-short control cycle, fast load response to guarantee processing accuracy.
- Complete Diagnosis System: Real-time drive status monitoring and detailed fault information for rapid troubleshooting.
- التوسع المرن: I/O points and communication interfaces can be expanded via extension modules to meet diverse application demands.
سيناريوهات التطبيق النموذجية
- Automatic Production Line: ماكينات التعبئة والتغليف, printing equipment, electronic assembly lines.
- CNC Machine Tools: Small machining centers, CNC lathes and milling machines.
- التعامل مع المواد: Automated warehousing systems, robotic handling and conveyor lines.
- Precision Processing: معدات أشباه الموصلات, medical devices and optical instrument manufacturing.
- Textile Machinery: Spinning machines, weaving machines and printing & dyeing equipment.
- Supplementary Notes
- Product Status: VDM01D10AA00 (MC-4 series) توقف. Schneider recommends Lexium 62 series as the direct replacement.
- Programming Environment: Programming and commissioning via Schneider Machine Expert (formerly SoMachine) or ELAU PacDrive software.
- تكامل النظام: Seamlessly compatible with Schneider Modicon PLC and HMI touch screens to build a complete automation solution.
- نصائح الصيانة: Regularly check fan operation and ventilation conditions; update firmware periodically to optimize performance and safety.
Schneider Servo Drive Full Model List & Accessory List
- Mainstream Servo Drive Series Overview
Schneider servo drives take the Lexium series as the core product line, covering micro to large-scale equipment, from independent control to distributed multi-axis systems. The ELAU PacDrive series is reserved for high-end motion control applications. Below is classified introduction including model naming rules, core models and key parameters.
1.1 ليكسيوم 18 مسلسل (اقتصادية, 0.05~4.5kW)
تحديد المواقع: Entry-level compact servo, EtherCAT (18ه) / نبض (18ص) types, أداء عالي التكلفة.
| بادئة النموذج | Control Type | مزود الطاقة | نطاق الطاقة | Core Model Examples |
| LXM18E | EtherCAT Bus Type | 3-phase 230V | 0.05~4.5kW | LXM18ED01M3X (0.1كيلوواط), LXM18ED04M3X (0.4كيلوواط), LXM18ED10M3X (1.0كيلوواط), LXM18ED45M3X (4.5كيلوواط) |
| LXM18P | Pulse Control Type | 3-phase 230V | 0.05~4.5kW | LXM18PD01M3X (0.1كيلوواط), LXM18PD07M3X (0.7كيلوواط), LXM18PD20M3X (2.0كيلوواط) |
Naming Rule: LXM18[E/P][د][كود الطاقة]M3X
E/P: E=EtherCAT, P=Pulse Control
د: النوع القياسي
كود الطاقة: 01=0.1kW, 04=0.4kW, 07=0.7kW, 10=1.0kW, 20=2.0kW, 30=3.0kW, 45=4.5kW
M3X: 3-phase 230V power supply, التكوين القياسي
1.2 ليكسيوم 28 مسلسل (مدمج, 0.05~4.5kW)
تحديد المواقع: Miniaturized design with CANopen communication, suitable for space-limited occasions.
| بادئة النموذج | Control Type | مزود الطاقة | نطاق الطاقة | Core Model Examples |
| LXM28AU | CANopen Bus Type | 3-phase 230V | 0.05~4.5kW | LXM28AU01M3X, LXM28AU07M3X, LXM28AU20M3X, LXM28AU30M3X |
| LXM28CU | Pulse Control Type | 3-phase 230V | 0.05~4.5kW | LXM28CU01M3X, LXM28CU04M3X, LXM28CU10M3X |
Naming Rule: LXM28[مكيف الهواء]ش[كود الطاقة]M3X
A=CANopen, C=Pulse Control
ش: النوع القياسي
1.3 ليكسيوم 32 مسلسل (High-performance, 0.15~11kW)
تحديد المواقع: Book-type high-performance servo, EtherCAT/PROFINET supported for complex motion control.
| بادئة النموذج | يكتب | مزود الطاقة | نطاق الطاقة | Core Model Examples |
| LXM32AD | Dual-axis | 3-phase 400V | 0.15~11kW | LXM32AD18M4X, LXM32AD36M4X, LXM32AD72M4X |
| LXM32AU | Single-axis | 3-phase 400V | 0.15~11kW | LXM32AU02M4X, LXM32AU07M4X, LXM32AU18M4X, LXM32AU72M4X |
1.4 ليكسيوم 62 مسلسل (Modular Multi-axis, 0.3~24kW)
تحديد المواقع: Modular structure, shared DC bus, for large multi-axis automation systems.
| بادئة النموذج | Axis | Safety Grade | التصنيف الحالي | Core Model |
| LXM62DU | Single-axis | معيار | 6~130A | LXM62DU06D21000, LXM62DU10D21000 |
| LXM62DD | Dual-axis | معيار | 6~45A×2 | LXM62DD06D21000, LXM62DD10D21000 |
| LXM62EU | Single-axis | SIL3 Safety | 6~130A | LXM62EU06E21000, LXM62EU10E21000 |
| LXM62ED | Dual-axis | SIL3 Safety | 6~45A×2 | LXM62ED06E21000, LXM62ED10E21000 |
1.5 ليكسيوم 62 ILM Series (Integrated Servo Motor, 0.3~2kW)
تحديد المواقع: Integrated drive & motor design, reduced wiring for modular multi-axis equipment.
| بادئة النموذج | نطاق الطاقة | Control Protocol | أمثلة |
| ILM62 | 0.3~2kW | SERCOS III / EtherCAT | ILM62-030-400, ILM62-070-400, ILM62-150-400, ILM62-200-400 |
1.6 ELAU PacDrive MC-4 Series (High-end Motion Control, 0.75~15kW)
تحديد المواقع: Discontinued high-end servo for high-precision synchronization such as packaging and printing machinery.
| Prefix | Drive Type | حاضِر | نموذج نموذجي | رقم الطلب. |
| VDM | Standard Servo Drive | 6~30A | VDM01D06AA00, VDM01D10AA00 | 13130245 / 13130247 |
| VCA | Compact Servo Drive | 6~20A | VCA06AAAA0AA00, VCA10AAAA0AA00 | 13130260 / 13130262 |
- Universal Accessory List (Full Series Compatible)
| Accessory Category | Part No. | وصف | طلب |
| Main Power Cable | VW3M5101Rxxx | 3-phase 380-480V power connection | All servo drives |
| Motor Power Cable | VW3M5102Rxxx | Motor power connection wire | BSH series motor matching |
| كابل التشفير | VW3M5103Rxxx | Motor feedback signal cable | Full series |
| Control Cable | VW3M4A11 | SCSI-26 control connector kit | ليكسيوم 16/18 |
| SERCOS Bus Cable | VW3E5001Rxxx | RJ45 high-speed bus cable | PacDrive / ILM62 |
| EtherCAT Cable | VW3M8122Rxxx | Industrial Ethernet cable | Lexium 18E/32/62 |
| Braking Resistor | VW3A3401 | Dissipate regenerative energy | Frequent start-stop working conditions |
| DIN Mounting Rail | 35mm Standard Rail | Cabinet installation fixing | All cabinet-type drives |
| SD Memory Card | TMASD1 | Firmware update & program backup | SD-card supported models |
| Commissioning Software | Machine Expert | إعداد المعلمة, programming & diagnosis | Unified for all series |
- Special Series Accessories
3.1 ليكسيوم 62 Special Accessories
| اسم الملحق | نموذج | وظيفة |
| Single-axis Power Supply | LXM62PS060 | 60A DC bus power unit |
| Dual-axis Power Supply | LXM62PS120 | 120A DC bus power unit |
| Safety Relay Module | LXM62SR | ستو / SBC safety function expansion |
| Digital I/O Module | LXM62DI8/DO8 | 8من / 8DO expansion |
| Analog I/O Module | LXM62AI2/AO2 | 2منظمة العفو الدولية / 2AO expansion |
3.2 ELAU PacDrive Special Accessories
| اسم الملحق | نموذج | وظيفة |
| Power Supply Unit | PS-5 | 5kW DC power supply for MC-4 drives |
| Power Distribution Module | DB-5 | Multi-axis power distribution |
| محرك سيرفو | SM Series | Matching PMSM motor for MC-4 |
| Motion Controller | C200/A2 | PacDrive multi-axis synchronous controller |
- General Remarks
- Product Iteration:
ليكسيوم 62 is the current mainstream high-end model to replace the old Lexium 52;
ELAU PacDrive MC-4 is fully discontinued and replaced by Lexium 62;
ليكسيوم 18 is the latest economical model to upgrade Lexium 28 partial applications.
- دليل الاختيار:
Small standalone equipment: ليكسيوم 18 / 28
Medium production line: ليكسيوم 32
Large multi-axis system: ليكسيوم 62
High-precision synchronous equipment: ليكسيوم 62 ILM / PacDrive (legacy upgrade)
- Accessory Matching:
All cables and modules must be model-specific;
Safety-related configurations shall comply with SIL 3 / PL e;
Shared DC bus design is recommended for multi-axis systems to improve energy efficiency.
