Mitsubishi SPS-Stromversorgungsmodul A1S63P

Modellsegmentdefinition

Kernpositionierung: Provides stable DC5V/5A system power for AnS series PLCS. It is dedicated to the base power slot and supplies power to the CPU and I/O modules via the base bus.

2. Kernspezifikationsparametertabelle

3. Zubehörliste & Installationsrichtlinien

3.1 Standardzubehör

Module body ×1

Installationshandbuch ×1

Terminal label sticker ×1

Fixing buckle ×2 (for base locking)

3.2 Vorsichtsmaßnahmen bei der Installation

1. Position Requirement: Must be installed in the dedicated power slot on the far left of the A-series base unit; do not insert into I/O slots.
2. Verkabelungsspezifikation:

Eingangsleistung: L+ (DC24V+), L(DC24V-), connect to external DC24V power supply.

Base Power Supply: Automatically connected via gold fingers at the module bottom, no additional wiring required.

3. Redundanzdesign: Dual power redundancy is not supported. For redundant power supply, select models such as Q-series Q63RP.
4. Wärmeableitungsraum: Reserve ≥50mm clearance above the module to avoid direct contact with heat-generating components.
5. Wettbewerber-Ersatz / Markenübergreifender Vergleich

4.1 Mitsubishi Same-series Replacement Models

4.2 Cross-brand Replacement Solutions

5. Auswahlrichtlinien & Ersatzlösungen

5.1 Kernauswahlkriterien

✅ Input Power Matching: Confirm on-site DC24V power supply with fluctuation ≤±30%.

✅ Load Calculation:

Single module max load: 5A DC5V

Recommend 20% margin reserved (actual load ≤4A) to prevent frequent overcurrent protection triggering.

Calculation Example: CPU (0.8A) + 8-slot I/O (0.3A per slot) = 3.2A, meets requirement.

✅ System Expandability: If expansion to more than 8 slots is needed in the future, choose A1S61PN (8Eine Ausgabe).

✅ Anpassung an die Umwelt: Ensure operating temperature ≤55℃ and humidity within industrial standard range.

5.2 Upgrade & Replacement Routes

Scheme A: Same-series Upgrade (Lowest Cost)

Load increase: A1S63P → A1S61PN (AC input, 8Eine Ausgabe)

Battery backup required: A1S63P → A1S63P-BAT (version with battery interface)

Scheme B: A-series to Q-series Upgrade (Performance Improvement)

1. Leistungsmodul: A1S63P → Q63P (DC24V-Eingang, 5Eine Ausgabe)
2. Base Adaptation: Adopt QA extension base (z.B. QA65B), original A-series I/O modules can be retained.
3. Vorteile: Improved system stability, supports more I/O expansion, compatible with Q-series high-speed modules.

Scheme C: Full Upgrade to iQ-R Series (Future-oriented)

Leistungsmodul: A1S63P → R63P (DC24V-Eingang, 5Eine Ausgabe)

Adaptation Method: Use conversion adapter to replace old modules gradually.

Vorteile: Supports Ethernet / CC-Link IE Field Network, enhances data processing capability and system integration.

5.3 Allgemeine Fehlerbehebung

Der A1S63P ist ein dedizierter DC24V-Eingang / DC5V 5A Ausgangsstromversorgungsmodul für SPS der Mitsubishi AnS-Serie. Mit kompakter Struktur und stabiler Leistung, Es ist ideal für kleine und mittlere Automatisierungssysteme.

Während der Auswahl, focus on input power type, load capacity and system expandability. Zum Upgrade, choose high-power models in the same series or migrate to Q-series / iQ-R series via adapted base units to achieve system performance enhancement.

Complete Model List of Mitsubishi AnS Series PLC (Strukturierte Klassifizierung)

1. Quick Overview of Model Naming Rules

2. CPU Modules (Core Control Unit)

3. Power Supply Modules (System Power Core)

4. Base Units (Module Mounting Carrier)

5. Digitale I/O-Module (Discrete Control)

5.1 Input Modules (A1SX Series)

5.2 Output Modules (A1SY Series)

6. Analoge I/O-Module (Prozesskontrolle)

6.1 Analoge Eingangsmodule (A1S68AD Series)

6.2 Analoge Ausgangsmodule (A1S62DA Series)

6.3 Temperature Input Modules (A1S68TD Series)

7. Spezielle Funktionsmodule (Advanced Control)

7.1 Positionierung / Motion Control Modules (A1SD Series)

7.2 High-speed Counter Modules (A1SD62 Series)

7.3 Other Special Modules

8. Network Communication Modules (Data Interaction)

8.1 Serial Communication Modules (A1SJ71C Series)

8.2 Ethernet-Module (A1SJ71E Series)

8.3 Fieldbus Modules

9. Ergänzende Hinweise

9.1 Serienpositionierung

AnS Series: Compact modular PLC, positioned between FX series (klein) and Q series (groß), suitable for small and medium-sized control systems.

Kompatibilität: AnS modules can be adapted to Q-series PLC via QA extension base units for system upgrade.

9.2 Einstellung & Ersatzinformationen

The AnS series was fully discontinued in September 2014.

Officially recommended replacement series: iQ-R Series (Hohe Leistung), Q-Serie (Medium), L-Serie (Kompakt).

9.3 Wichtige Auswahlpunkte

CPU Selection: Choose according to program capacity, I/O points and processing speed.

Leistungsberechnung: Ensure total DC5V current consumption ≤ 80% of the power module rated value.

Erweiterungskapazität: Max support 11-slot base unit, erweiterbar bis zu 2048 I/O-Punkte.