Pro-face LT3300-T1-D24-K All-in-One Controller

(PFXLT3300TADK)

Positionierung: LT3000 Series, 5.7″ HMI+PLC all-in-one Regler (touchscreen + logic control integrated), Sink output type

Suffix distinction: K = Sink (sinkende Leistung); C = Source (Beschaffung von Output, LT3300-T1-D24-C)

Grundlegende Spezifikationen

Anzeige: 5.7″ TFT-Farbe, QVGA 320×240, 65536 Farben (supports blink)

Stromversorgung: DC24V, allowable range DC19.2～28.8V

E/A: Built-in 32-point DIO (16AUS / 16TUN, Sink output); 0.2Ein pro Punkt, max 1.6A per common terminal; supports pulse output and high-speed counter

Kommunikation: COM1 (RS232/422/485, 9-Pin D-Sub), 10/100M Ethernet RJ45, USB1.1 Host (Type-A)

Erweiterung: EXT1 for EX modules (bis zu 3 EX/TM3 modules); EXT2 optional CANopen master module (CA8-CANLT-01)

Abmessungen: W167.5 × H135 × D77.6 mm

Panel-Ausschnitt: W156 × H123.5 mm

Schutz: Front IP65f (Panelmontage)

Programmkapazität: Max 15,000 logic steps; 6MB flash memory for screens

Programmiersoftware: GP-Pro EX V3.01.200 or higher

Lebensende & Ersatzinformationen

EOL-Status: LT3300-T1-D24-K order acceptance stopped, final order date: 2024-09-02; repair support until 2031-12-02

Offiziell empfohlener Ersatz: PFXSTC6300TADDKE (STC6300TA, Sink output)

Replacement notes:

Cutout compatible for direct panel installation; slight difference in housing dimension
Resolution upgraded to VGA 640×480, screen project must be converted in GP-Pro EX
DIO pin assignment and 38-pin DIO connector are compatible, original wiring can be reused
Max 2 TM3/EX modules directly connected to STC main unit; 3 modules require TM3XTRA1+TM3XREC1 expansion transceiver modules
STC6000 does NOT support screen blink function, blink animations in old projects need redesign
Minimum software requirement: GP-Pro EX V4.09.500+

Matching EX Expansion Modules (gleiche Serie, also discontinued)

EXM-DDI8DT / EXM-DDI16DT Digital Input

EXM-DDO8UT / EXM-DDO16UK Sink Output

EXM-DDO8TT / EXM-DDO16TK Source Output

EXM-DRA8RT / EXM-DRA16RT Relay Output

EXM-AMI2HT / AMI4LT Analog / Temperatureingabe

EXM-AMO1HT Analog Output

The new STC platform uses Schneider TM3 modules to replace the above EX modules

Common Spare Parts / Teilenummern

DIO Connector: CA7-DIOCN5-01

Power Connector: CA5-DCCNM-01

Mounting Clips: CA3-ATFALL-01

Waterproof Gasket: CA3-WPG6-01

USB Download Cable: CA3-USBCB-01

Troubleshooting for LT3300T Common Faults

Schwarzer Bildschirm beim Einschalten: Verify DC24V ≥19.2V; backlight aging is a frequent failure for this model
Touch-Drift / no touch response: Analog resistive screen aging; touch panel can be replaced separately
No DIO output action: Distinguish Sink / Quelle, confirm common terminal wiring; check pulse/output assignment in program
Kommunikationsfehler: Check COM DIP switch, protocol and station number; verify Ethernet IP and GP-Pro EX transfer key
Programmverlust: Backup battery failure; replace battery then re-download project + logic program

Typische Anwendungsfälle von Pro-Gesicht LT3300-T1-D24-K (HMI+PLC All-in-One)

Kernvorteile: 5.7″ screen + built-in 16DI/16DO, native pulse output & Hochgeschwindigkeitszähler, expandable via EX modules; one software GP-Pro EX for both screen graphics and logic programming. Suitable for small & mittlere Standalone-Maschinen, eliminates separate PLC, shrinks control cabinet and reduces wiring. K version is Sink output, compatible with most NPN sensors used domestically.

Fall 1: Vertical Form-Fill-Seal Packaging Machine (Am häufigsten)

Konfiguration: LT3300-T1-D24-K main unit + EXM-AMI4LT temperature module

Controlled objects: Servo film pulling, sealing heating, hopper feeding, photoelectric detection, color mark positioning, pneumatic gripper

Resource utilization: Native pulse output drives film feed servo; built-in high-speed counter reads color mark sensor; DI for material level, Sicherheitstür, Not-Aus; DO for solenoid valves and heating contactors

HMI screens: Bag length setting, production count, sealing temperature curve, Fehleralarm, recipe switching for multiple bag sizes

Kommunikation: RS485 connected to temperature controllers; Ethernet uploads output and reject data to host PC

Vorteile: Single unit handles HMI and motion logic for compact control cabinet; IP65 front panel for humid food workshop; product changeover via recipe recall without program modification

Fall 2: Small Blow Molding / PET Bottle Blowing Machine

Konfiguration: LT3300-T1-D24-K + optional CA8-CANLT-01 CANopen-Mastermodul

Kontrolle: Mold opening/closing, blow timing, heating zone temperature control, robot pick-up, low-pressure / high-pressure blow sequence

Höhepunkte: CANopen module connects CANopen servos and IO slaves; high-speed counter reads encoder position; interlock logic for safety door and pressure protection

HMI screens: Blow pressure curve, heating temperature, cycle time, Alarmprotokoll, manual debug page

Industry feature: Bulk export machines, fewer spare part types and simple maintenance

Fall 3: Transfer Lifter / Jacking Transfer Station (Automotive Component Workstation)

Konfiguration: LT3300-T1-D24-K main unit, optional EX digital expansion

Kontrolle: Roller conveyor, jacking cylinder, translation servo, stop cylinder, barcode scanner signal, Sicherheitslichtvorhang

Logik: Station interlock, Positionsbestätigung, cycle timing, NG part diversion; pulse output for translation servo positioning

Kommunikation: RS485 for barcode scanner; Ethernet upload station status to MES

Wert: Independent control for single workstation, no main PLC required; easy separate commissioning and maintenance

Fall 4: Small Injection Molding Auxiliary Equipment (Granulator, Dryer Hopper, Auto Loader)

Konfiguration: LT3300-T1-D24-K main unit + EXM-AMI2HT analog module

Kontrolle: Lüfter, suction valve, material level detection, Heizung, Überlastschutz, delayed feeding

Funktionen: PID drying temperature control, high/low material level alarm, automatic suction cycle, runtime maintenance reminder

Vorteile: Compact electrical box for auxiliary equipment; IP65 front panel suitable for dusty workshop

Fall 5: Small Special Machine for Grinding / Bohren

Konfiguration: LT3300-T1-D24-K, pulse output for feed servo, high-speed counter for spindle encoder

Kontrolle: Spindle start/stop, feed positioning, cooling pump, clamping cylinder, Reiselimit, tool position detection

HMI screens: Feed distance, spindle speed, production count, manual jog, parameter password lock to prevent unauthorized modification

Sicherheitslogik: Nothalt, Türverriegelung, overtravel protection; fast response via native I/O interlock

Fall 6: Small Rail-Guided AGV for Material Transport

Konfiguration: LT3300-T1-D24-K + CANopen module

Kontrolle: Travel drive, steering, obstacle avoidance sensors, station identification, Klang & light alarm, lifting mechanism

Merkmale: CANopen bus for travel servo; DI for obstacle avoidance and magnetic strip station sensors; Ethernet remote monitoring of position and faults; compact panel mounted on AGV control box

Notiz: Limited native I/O, additional sensors require CANopen slave I/O expansion

Fall 7: Kühler / Small Constant Pressure Water Supply Cabinet for HVAC

Konfiguration: LT3300-T1-D24-K + analog EX modules

Acquisition: Drucktransmitter, Temperatur, Flüssigkeitsstand; DO controls water pumps, Kühlturmventilatoren, Magnetventile; RS485 communication with VFDs

Funktionen: Constant pressure PID, pump rotation, fault backup, operation log, high/low limit alarm; remote view of pressure & temperature via Ethernet

Geeignet für: Small building supporting system or independent workshop cooling system, replaces separate HMI + micro PLC

Fall 8: Lithium Battery Small Sorting & Test Jig

Konfiguration: LT3300-T1-D24-K native I/O + EX analog module

Kontrolle: Cylinder clamping, probe test, sorting gate, voltage/internal resistance sampling, OK/NG diversion

HMI screens: Test parameters, yield statistics, alarm history, barcode binding for cell ID

Merkmale: Simple logic and short cycle, niedrige Kosten, compact fixture layout for parallel test stations

Allgemeine Auswahl & Betriebshinweise (K Version Focus)

K = Sink (NPN-kompatibel, sinkende Leistung) : Direct match with most domestic NPN photoelectric and proximity sensors; select C version Source for PNP sensors
Max I/O scale: 16DI+16DO onboard, bis zu 3 external EX modules. Not suitable for high I/O count or multi-axis motion applications; use independent PLC + HMI instead
Pulse axis: Native pulse output for 1~2 axis simple positioning, not recommended for complex multi-axis motion
Software: GP-Pro EX handles both screen graphics and control logic; one single project file for download
EOL reminder: LT3300 discontinued; new projects use STC6300TA as replacement. Current demand is mostly spare parts and project migration for legacy machines

Unsuitable Scenarios for LT3300

Large conveyor lines, motion control over 10 Achsen, massive distributed I/O, complex MES interface

Sicherheits-SPS / PLd safety level applications (standard I/O does not meet safety rating)

Pro-face All-in-One Controller (HMI+PLC) Modellliste

Notizen:

K = Sink (sinken / NPN-Ausgang, in China weit verbreitet); C = Source (Beschaffung / PNP-Ausgang)

LT3000: Auslaufmodell; STC6000: Current main replacement for LT3000; LT4000M: New modular all-in-one

Unified programming software: GP-Pro EX

LT3000 Series (Legacy All-in-One, Auslaufmodell)

LT3201-A (3.8″ QVGA)

LT3201-A1-D24-K (Waschbecken)

LT3201-A1-D24-C (Quelle)

LT3300-T (5.7″ TFT, Ihr Zielmodell)

LT3300-T1-D24-K (PFXLT3300TADK, Waschbecken)

LT3300-T1-D24-C (PFXLT3300TADC, Quelle)

LT3300-S (5.7″ STN Monochrome)

LT3300-S1-D24-K

LT3300-S1-D24-C

LT3300-L (5.7″ TFT Basic Version)

LT3300-L1-D24-K

LT3300-L1-D24-C

LT3301-L (5.7″ TFT, larger logic capacity)

LT3301-L1-D24-K

LT3301-L1-D24-C

LT3000 expansion: EXM I/O / analoge Module; optional CANopen master module CA8-CANLT-01

STC6000 Series (Official replacement for LT3000, Active Sales)

5.7″ VGA, built-in 16DI+16DO, supports Schneider TM3 modules

PFXSTC6300TADDKE (Waschbecken / NPN, equivalent to LT3300-T1-D24-K)

PFXSTC6300TADDCE (Quelle / PNP, equivalent to LT3300-T1-D24-C)

LT4000M Series (Modular All-in-One, Compact 22mm cutout type)

LT4201TM (3.5″ QVGA)

Digital Type

PFXLM4201TADDK (Waschbecken)

PFXLM4201TADDC (Quelle)

Analog Type

PFXLM4201TADAK (Waschbecken)

PFXLM4201TADAC (Quelle)

LT4301TM (5.7″ QVGA)

Digital Type

PFXLM4301TADDK (Waschbecken)

PFXLM4301TADDC (Quelle)

Analog Type

PFXLM4301TADAK (Waschbecken)

PFXLM4301TADAC (Quelle)

LT4000M Back Expansion Modules

PFXLM4B01DDK / PFXLM4B01DDC (DIO back module)

PFXLM4B01DAK / PFXLM4B01DAC (Analog back module)

Early Legacy LT Series (Very old, GLC derivative)

GLC150 series (LT Type A/B/C/H), only spare part market available, not for new projects:

GLC150-BG41-XY32SK-24V

GLC150-BG41-XY32KF-24V

GLC150-BG41-RSFL-24V

GLC150-BG41-ADK-24V

GLC150-BG41-ADTK-24V

Serienvergleichstabelle

Serie	Status	Bildschirm	Expansion System
LT3000	Auslaufmodell	3.8″/5.7″	EXM Modules
STC6000	Active Sales	5.7″ VGA	TM3 Modules
LT4000M	Active Sales	3.5″/5.7″	LT4000 Back Modules