LUST CM-DPV1.3.0 Especificaciones detalladas

LUJURIA‑CM‑DPV1.3.0: Módulo de comunicación LUST PROFIBUS‑DP

(Módulo de comunicación PROFIBUS-DP)

CM-DPV1.3.0 es un módulo de comunicación PROFIBUS-DPV1 diseñado por LUST (posteriormente adquirido por Lenze) Específicamente para unidades de la serie C-line.. Below are the complete technical specifications and functional features.

Modelo: CM-DPV1.3.0 (also marked as CM-DPV1,3.0)

Tipo de producto: PROFIBUS-DP Slave Communication Module (supports DPV1 extension protocol)

Applicable Drives: CDA3000 Inverter, CDD3000 Servo Controller, CDE/CDB3000 Position Controller, CTC3000 Direct Drive Controller

Software Version: Commonly V2.25-00 (upgradable via DriveTop)

Modelo de reemplazo: CM-DPV1.3.1 (hardware compatible, software optimized)

Lenze Replacement: EMF2177IB (fully functionally compatible)

Artículo	Especificación
Supply Voltage	18–30 V DC (powered by drive backplane)
máx.. Operating Current	0.25 A
Interfaz de comunicación	PROFIBUS-DP (9‑pin D‑sub, compliant with EN 50170)
Baud Rate	9.6 kbps / 19.2 kbps / 45.45 kbps / 93.75 kbps / 187.5 kbps / 500 kbps / 1.5 Mbps / 3 Mbps / 6 Mbps / 12 Mbps (auto‑detection)
Slave Address Range	1–125 (set by DIP switches S1/S2 or parameter 582‑PBADR)
Process Data (PZD)	Input: max. 244 bytes; Output: max. 244 bytes
Acyclic Data (PKW/DPV1)	Supports parameter read/write, diagnostics, firmware upload
Clase de protección	IP20 (installed inside the drive)
Temperatura de funcionamiento	0–55 °C
Temperatura de almacenamiento	-25–+70 °C
Dimensiones	Aprox.. 90 × 90 × 30 milímetros (for C-line communication slot)
Peso	Aprox.. 0.16 kilos

Cyclic data exchange (PZD): real-time control word, setpoint, status word, actual value

Acyclic data exchange (PKW): parameter read/write, diagnostics, firmware update

Extended diagnostics: detailed network/module/drive status, fault codes

EasyDrive Mode: standard PZD structure (control word / status word + setpoint / actual value)

ProfiDrive Mode: compliant with PROFIdrive profile, suitable for standard PLC configuration

Bus status, module status, communication errors, drive faults

Supports PROFIBUS standard diagnostic messages and extended diagnostics

Hardware: address setting via DIP switches, X13 interface coding

Software: parameter configuration via LUST DriveTop / Lenze Engineer, GSD file configuration

GSD File: LUST08E9.GSD (standard version)

Ubicación de instalación: Dedicated communication slot for C-line drives (no extra wiring needed)

Compatibilidad: Hardware compatible with CM-DPV1.3.1, reemplazo directo

Configuration Tools: DriveTop (LUST), Engineer (Lenze)

Supported Systems: Mainstream PROFIBUS masters such as Siemens, Schneider, TEJIDO

Líneas de producción automatizadas, robot systems, maquinaria de embalaje, printing equipment, material handling

Industrial automation systems requiring PROFIBUS-DP centralized control, parameterization and diagnostics

Noticias Noticias comerciales