Contacteur,disjoncteur,onduleur solaire,compteur électrique,batteries solaires
Quick Overview of Core Specifications
Type de produit: Standard Managed Commutateur Ethernet industriel of Schneider Modicon series
Fabricant: Schneider Électrique, headquartered in France
Primary Production Location: Allemagne (site for final critical assembly processes)
Positionnement du produit: Industrial automation networking device as replacement for legacy TCSESM043F2CU0
Configuration des ports: 4×RJ45 Copper Ports (10/100Mbit/s) + 2×SC Multi-mode Fiber Ports (100Mbit/s), DIN rail mountable
- Model Code Definition Table
| Segment de code | Code | Définition |
| MCS | MCS | Modicon Connectivity System, Schneider Modicon networking product line |
| ESM | ESM | Ethernet Standard Managed, standard managed Ethernet switch |
| 63 | 63 | Port layout: total 6 ports consisting of two types (4 copper + 2 fiber) |
| F2 | F2 | Fiber interface: 2 multi-mode fiber ports (100BASE-FX) |
| CU | CU | Copper interface: RJ45 copper ports (10/100BASE-TX), configuration standard |
| 0 | 0 | Revision: standard base version |
III. Core Specification List
| Catégorie | Paramètre technique | Remarques |
| Configuration des ports | ||
| Total Ports | 6 | 4 copper + 2 fiber |
| Copper Ports | 4×RJ45 (10/100BASE-TX) | STP cable, CAT5E or higher grade |
| Fiber Ports | 2×SC Duplex (100BASE-FX) | Multi-mode fiber; transmission distance: 4kilomètres / 5kilomètres |
| Performance Specs | ||
| Switching Capacity | 1.2Gbit/s | Non-blocking wire-speed forwarding |
| Management Features | Standard Managed | Port Security, IP/MAC Binding, RADIUS Authentication supported |
| Redundancy Protocol | MRP Ring supported | Ring recovery time <20MS |
| Pouvoir & Données environnementales | ||
| Tension de fonctionnement | 9.6–32VDC | Wide-range input for industrial power supply |
| Consommation d'énergie | 7W | Low-power design |
| Température de fonctionnement. | 0°C ~ +60°C | Designed for harsh industrial ambient conditions |
| Protection contre la pénétration | IP30 | Étanche à la poussière, convient pour une installation en armoire |
| Montage | Rail DIN standard de 35 mm | Conforme à la norme EN 50022 |
| Certifications | CE, UL, RCM, CAE, UKCA, DNV | Conforms to UL 61010 & EN/IEC 61131 |
- Full Series Cross Reference (MCS ESM 6-Port Family)
| Numéro de pièce | Port Layout | Fiber Type | Copper Interface | Caractéristique spéciale |
| MCSESM063F2CU0 | 4Cu+2Fiber | Multi-mode (SC) | Standard RJ45 | Basic Managed |
| MCSESM063F2CS0 | 4Cu+2Fiber | Multi-mode (SC) | Standard RJ45 | Enhanced Security Function |
| MCSESM063F2LU0 | 4Cu+2Fiber | Monomode (SC) | Standard RJ45 | Long-distance Transmission |
| MCSESM063F2LS0 | 4Cu+2Fiber | Monomode (SC) | Standard RJ45 | Monomode + Security Option |
- Champs d'application & Project Cases
- Scénarios applicables
Factory Automation: PLC-HMI interconnection, sensor data collection, production line equipment networking
Contrôle des processus: DCS network for chemical, petrochemical and water treatment industries
Smart Manufacturing: Industrie 4.0 IIoT deployment with OPC UA protocol support
Critical Infrastructure: Backbone networking for power, railway transit and building automation
Harsh Working Conditions: Replaces commercial switches in dusty, vibratory and temperature-fluctuating industrial sites
- Cas d'application typique
Cas: Auto Component Production Line Networking
Field Devices: 20 Robots, 10 Capteurs, 5 IHM
Solution: 3 units of MCSESM063F2CU0 forming MRP redundant ring to connect field equipment to central PLC
Avantages: Industrial-grade reliability, high EMC immunity, fast ring recovery, stable under workshop vibration
- Applications non recommandées
Ambient temperature exceeding >60°C or below <0°C (Wide-temperature variant required)
Heavy corrosive gas environment (Sealed industrial switch needed)
Data rate over 100Mbps (Gigabit model such as MCSESM203 series required)
- Conformité des expéditions aériennes & Certifications
Shipping Classification: Non-dangerous goods without built-in lithium battery, conforme à IATA DGR
Certificats CE: Conforme à la norme EN 60947-4-1, Cert No.: CE 0123
Certificats UL: Complies with UL 508, File No.: E249461
RoHS Compliance: Meets Directive 2011/65/EU, free of restricted hazardous substances
VII. Informations sur la commande
Code de commande: MCSESM063F2CU0
Minimum Pack Quantity: 1 unit per carton
Période de garantie: 12 mois
Accessoires recommandés: SC multi-mode fiber patch cord, DIN rail mounting clip, DC power adapter
Full Detailed Technical Datasheet for Schneider MCSESM063F2CU0 Industrial Switch
- Core Summary
Modèle: MCSESM063F2CU0
Gamme de produits: Schneider Modicon MCS (Modicon Connectivity System) Standard Managed Industrial Ethernet Switch
Fabricant: Schneider Électrique (HQ in France, major production in Germany)
Configuration des ports: 4×10/100M RJ45 + 2×100M SC Multi-mode Fiber, total 6 ports
Product Position: Industrial automation networking replacement for obsolete TCSESM043F2CU0
Montage: Standard 35mm DIN rail per EN 50022
- Complete Model Code Explanation
| Segment de code | Code | Description complète |
| MCS | MCS | Modicon Connectivity System, dedicated for industrial automation networking |
| ESM | ESM | Ethernet Standard Managed, basic full-function managed switch |
| 63 | 63 | Total 6 ports in two categories: 4 copper + 2 fiber |
| F2 | F2 | Two multi-mode 100BASE-FX ports with SC duplex connector |
| CU | CU | RJ45 copper 10/100BASE-TX, STP CAT5E & above cabling |
| 0 | 0 | Standard base revision without extra customized options |
III. Itemized Detailed Technical Specifications
- Physical Layer & Port Parameters
| Article | Notation | Spécification |
| Copper Ports | ||
| Quantité | 4 | Shielded RJ45 socket |
| Vitesse | 10/100Mbps auto-negotiation | Full/Half duplex auto-sensing |
| Standard | IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX | Auto MDI/MDI-X crossover |
| Cabling | STP CAT5E or higher | Max.. 100m transmission |
| Port Surge Protection | Intégré | Compliant with IEC61000-4-5 for industrial EMC |
| Fiber Ports | ||
| Quantité | 2 | SC Duplex multi-mode fiber receptacle |
| Rate | Fixed 100Mbps | Full-duplex per 100BASE-FX |
| Operating Wavelength | 850nm | Standard for multi-mode fiber |
| Distance de transmission | 4kilomètres(50/125µm),5kilomètres(62.5/125µm) | IEEE802.3u compliant |
| Fiber Spec | MMF 62.5/125μm & 50/125µm | Compatible with SC/ST connectors |
- Commutation & Network Performance
| Article | Valeur | Détails |
| Switching Capacity | 1.2Gbit/s | Store-and-forward non-blocking wire-speed |
| Packet Forwarding Rate | 0.89Mpps | Calculated under 64-byte frame for full wire-speed |
| Port Buffer | 16Ko | Independent buffer per port for traffic optimization |
| MAC Address Table | 8K entries | Auto-learning & aging, static MAC configurable |
| VLAN Capacity | Jusqu'à 64 VLAN | IEEE802.1Q tagged & port-based VLAN |
| Redondance | MRP | Recovery <20ms for high network availability |
| QoS | 4 priority queues | IEEE802.1p & DSCP based traffic prioritization |
| Supported Protocols | EtherNet/IP, TCP/IP, UDP, ICMP, ARP, DHCP, DNS, SNMPv1/v2c/v3, HTTP/HTTPS, Telnet/SSH, LLDP, SNTP, RSTP, MRP | Full industrial protocol compatibility |
- Électrique & Power Specifications
| Article | Paramètre | Description |
| Tension d'entrée | 9.6~32VDC (Nominal 12/24VDC) | Wide-range industrial DC input |
| Borne d'alimentation | 6-pin pluggable terminal | Reverse polarity protection for easy wiring |
| Max Power Draw | 7W | Low energy consumption |
| Protection contre les surintensités | Built-in short-circuit safeguard | Prevents damage from abnormal power supply |
| Alarm Relay Output | 1 Form-C dry contact (1A@250VAC /1A@30VDC) | Alarms for power fail, link down, device fault, over-temp & MRP ring failure |
- Mécanique & Physical Dimension
| Article | Spec | Remark |
| Dimension(L×P×H) | 57mm×104mm×138mm (142.8mm in partial datasheet) | Compact cabinet-saving design |
| Poids net | ~0.4kg | Léger pour une installation facile |
| Monter | 35mm DIN rail EN50022 | Snap-on fast installation |
| Enclosure Rating | IP30 | Dust-proof for indoor cabinet |
| Logement | Metal casing | Improved heat dissipation & EMC resistance |
| LED Indicators | Pouvoir, Link/Activity, Vitesse, Faute, MRP Ring | Real-time operating status visualization |
- Environnemental & Reliability Index
| Article | Notation | Standard |
| Température de fonctionnement. | 0°C ~ +60°C | Tolerates factory ambient fluctuation |
| Température de stockage. | -40°C ~ +85°C | Suitable for harsh logistics & stockage |
| Humidité relative | 10%~95% non-condensing | High-humidity workshop applicable |
| Résistance aux vibrations | 5–150Hz,1g | IEC60068-2-6 |
| Résistance aux chocs | 15g,11MS | IEC60068-2-27 against transport impact |
| CEM | EN61000-6-2(Immunité), EN61000-6-4(Émission) | Robust anti-interference for industrial automation |
| MTBF | >100,000 Heures | Long service life to reduce maintenance cost |
- Management & Security Functions
| Catégorie | Feature List | |
| Management Access | WebGUI, Telnet, SSH, SNMPv1/v2c/v3, Modbus-TCP | Multi-channel flexible configuration |
| Security Features | Port Security, IP/MAC Binding, RADIUS, HTTPS/SSH Encryption, ACL | Unauthorized access prevention |
| Diagnostics | Port statistics, error counter, cable test, internal temperature monitoring | Fast troubleshooting |
| Mise à niveau du micrologiciel | Remote upgrade via Web or TFTP | Convenient function expansion & bug fix |
| Configuration Management | Config backup/restore, auto-save | Simplify site maintenance |
- Conformité & Attestation
| Certificate | Standard | Note |
| Safety Cert | CE, UL, ASC, RCM, CAE, UKCA, DNV | UL61010, EN/IEC61131, EN/IEC62368-1 |
| Ethernet Standard | IEEE802.3/3u/1Q/1p/3ad | Global mainstream Ethernet compliance |
| Norme industrielle | IEC61000-6-2, IEC61000-6-4, IEC61850-3 | Approved for power & transport ferroviaire |
| Environnemental | RoHS 2011/65/EU | Lead-free eco-friendly construction |
| Logistique | Non-hazardous per IATA DGR | Safe for global air freight |
- Industry Application Matching
- Applications recommandées
Automated Production Line: PLC-HMI communication, capteur & robot control networking
Process Industries: DCS backbone for chemical, huile & traitement de l'eau
Smart Factory: IIoT & Industry4.0 deployment supporting OPC UA
Infrastructure: Power plant, chemin de fer & building automation core network
Rugged Sites: Replace consumer-grade switches in dusty, vibratory workshops
- Scénarios non recommandés
Température de fonctionnement >60°C or <0°C (Wide-temperature model required)
Heavy corrosive vapor environment (Hermetically sealed switch required)
Requirement over 100Mbps throughput (Gigabit MCSESM203 series needed)
Ultra-long fiber transmission (Single-mode variant MCSESM063F2LU0 recommended)
- Commande & Spare Parts Info
| Article | Détails |
| Numéro de pièce. | MCSESM063F2CU0 |
| Minimum Pack | 1ordinateur |
| Garantie | 12 Mois |
| Accessoires recommandés | SC MM fiber cord (62.5/125µm &50/125µm), DIN rail clip, 12/24VDC power adapter |
| Modèle de remplacement | Legacy TCSESM043F2CU0; upgraded 8-port MCSESM083F2CU0 |
- Selection Summary Tips
- Core Spec: 4Cu+2Multi-mode Fiber, standard managed, 1.2Gbps switching, MRP ring redundancy
- Pouvoir: 9.6~32VDC wide input universally matching industrial field power supply
- Monter: Rail DIN standard de 35 mm, IP30 metal casing with superior heat dissipation
- Sécurité: Port lock, IP/MAC bind & RADIUS; MTBF>100,000h for stable operation
- Target Industry: General manufacturing, traitement de l'eau, production d'énergie & rail automation
