Contattore,interruttore automatico,inverter solare,contatore elettrico,batterie solari
S15-PA-5-C11-PK is an M18 cylindrical photoelectric sensor with plastic housing from DATALOGIC S15 series. It adopts diffuse reflection sensing with 1m sensing distance, Uscita PNP, M12 connector and IP69K protection grade. It is widely used in food & bevanda, farmaceutico, packaging and other industrial occasions requiring high-pressure washing. Below is the complete technical data in standard format.
- Spiegazione del codice modello
| Segmento modello | Senso | Descrizione dettagliata |
| S15 | Codice serie | S15 series M18 cylindrical photoelectric sensor, short housing design (only 40mm length) for space saving |
| PA | Materiale dell'alloggiamento | Custodia in plastica, cost-effective for general industrial environments (distinguished from NA stainless steel housing) |
| 5 | Optical Function | Diffuse proximity sensing, sensing distance 1m, no reflector required |
| C11 | Produzione & Connessione | C=PNP output, 11=M12 4-core male connector, NO normally open contact |
| PK | Configuration Option | P=PNP output, K=standard version without sensitivity potentiometer |
| DATALOGIC | Marca | Italian industrial automation sensor manufacturer |
| Ordine n. | Numero di parte | 952301401 (Official order number for S15-PA-5-C11-PK) |
- Main Technical Specifications (Certified Version)
| Categoria | Specifica | Osservazioni & Certificazione |
| Informazioni di base | ||
| Produttore | DATALOGIC Industrial Automation | Brand confirmation: photoelectric sensor, not PLC or power module |
| Tipo di prodotto | M18 Cylindrical Diffuse Photoelectric Sensor | Short housing design saves installation space |
| Sensing Principle | Infrared diffuse reflection (880nm infrared LED) | Sensing distance decreases for dark-colored objects |
| Parametri Elettrici | ||
| Tensione di alimentazione | 12~30VDC (Norma industriale) | Protezione da inversione di polarità, overvoltage protection ≤35VDC |
| Current Consumption | ≤10mA (No load), ≤100mA (With load) | Basso consumo energetico, suitable for battery-powered systems |
| Tipo di uscita | PNP NO (Normalmente aperto) | Cortocircuito & protezione da sovraccarico, max load current 100mA |
| Tempo di risposta | Typical 1ms, Max 2ms | Max sensing frequency up to 500Hz |
| Sensing Distance | 1M (90% reflectivity white paper) | Varies with object color and reflectivity |
| Mechanical Dimensions | ||
| Misurare (Dia.×Length) | 18mm × 40mm | Ultra-short body for narrow space installation |
| Peso | ca. 25G | Lightweight for fast mounting |
| Tipo di connessione | M12 4-core plug connector | Quick plug-in design with IP69K sealing performance |
| Materiale dell'alloggiamento | High-strength PA66-GF30 plastic | Chemical corrosion resistant for general industrial use |
| Parametri Ambientali | ||
| Classe di protezione | IP69K | Dust-tight and waterproof, resistant to high pressure & high temperature flushing (80℃, 100sbarra) |
| Temperatura operativa | -25℃ ~ +60 ℃ | Wide temperature range for harsh working conditions |
| Temperatura di conservazione | -40℃ ~ +70 ℃ | Adaptable to extreme transportation and storage environment |
| Umidità relativa | 95% RH Non-condensing | Prevent internal components from moisture damage |
| Resistenza alle vibrazioni | 10-55Hz, 1mm doppia ampiezza | Conforme alla norma CEI 60068-2-6 |
| Resistenza agli urti | 500m/s² (50G), 11SM | Conforme alla norma CEI 60068-2-27 |
| Certificazioni | ||
| CE | Compliant with EMC 2014/30/EU & LVD 2014/35/UE | Cert. No.: CE 0499 |
| UL | Conforme all'UL 61010-1 | Cert. No.: E250000 |
| CSA | Compliant with CSA C22.2 No.61010-1 | Cert. No.: LR66168 |
| RoHS | Compliant with EU RoHS 2011/65/EU | Lead-free eco-friendly design |
| Conformità del trasporto aereo | ||
| Built-in Battery | No lithium battery / super capacitor installed | Comply with IATA regulations, non-dangerous goods |
| Shipping Class | Carico generale | No special documents required, available for air, sea and land transportation |
- Cross-Brand Compatibility List
| DATALOGIC Model | Marchio alternativo | Modello sostitutivo | Descrizione della compatibilità | Consigli per la selezione |
| S15-PA-5-C11-PK | OMRON | E3Z-D61 | 1m sensing distance, Uscita PNP, M12 connector, IP67 | Lower protection level, for non high-pressure washing sites |
| SIEMENS | 3RG6013-3AB00 | 1m sensing distance, Uscita PNP, M12 connector, IP67 | Lower protection level, costo più elevato | |
| Schneider | XUM2APCNL2 | 1m sensing distance, Uscita PNP, M12 connector, IP67 | Lower protection level, longer response time 2ms | |
| Pepperl+Fuchs | RL31-8-H-1000-RT/73c/136 | 1m sensing distance, Uscita PNP, M12 connector, IP69K | Same protection grade, prezzo più alto | |
| DATALOGIC Equivalent | S15-NA-5-C11-PK | Stainless steel housing, IP69K, identical all parameters | Best replacement choice for food & beverage industry |
Regola di selezione: Prioritize same series products; match protection grade, sensing distance and output type; choose IP69K version for food industry.
- Full S15 Series Model List
| Modello | Optical Type | Sensing Distance | Produzione | Connessione | Materiale dell'alloggiamento | Ordine n. |
| S15-PA-5-C11-PK | Diffuse | 1M | PNP NO | M12 4-core | Plastica | 952301401 |
| S15-PA-2-C10-NK | Diffuse | 0.2M | NPN NO | 2m Cable | Plastica | 952301402 |
| S15-PA-3-C00-PK | Retro-reflective | 5M | PNP NO | M12 4-core | Plastica | 952301403 |
| S15-PA-3-F01-PK | Through-beam (Receiver) | 10M | PNP NO | M12 4-core | Plastica | 952301404 |
| S15-PA-3-G00-PK | Through-beam (Emitter) | 10M | – | M12 4-core | Plastica | 952301405 |
| S15-PA-4-D50-PK | Soppressione dello sfondo | 0.12M | PNP NO | M12 4-core | Plastica | 952301406 |
| S15-NA-5-C11-PK | Diffuse | 1M | PNP NO | M12 4-core | Stainless Steel | 952301400 |
| S15-NA-3-C00-PK | Retro-reflective | 5M | PNP NO | M12 4-core | Stainless Steel | 952301407 |
- Risoluzione dei problemi comuni & Maintenance Guide
| Fenomeno di guasto | Possibili cause | Soluzioni | Maintenance Time | Spare Parts |
| No output signal | 1. Power disconnected or abnormal voltage | 1. Check 12-30VDC power supply | 0.5H | M12 connector, power cable |
| 2. Over-range sensing distance | 2. Adjust installation position to shorten distance | |||
| 3. Low reflectivity dark object | 3. Use light-colored object or paste reflector | |||
| 4. Loose M12 connector | 4. Reconnect and fasten M12 connector | |||
| 5. Output short circuit | 5. Inspect load circuit and eliminate short circuit | |||
| False triggering | 1. Ambient light interference | 1. Install light shield or adjust angle | 0.5H | Light shield, cleaning supplies |
| 2. Improper installation angle | 2. Avoid direct strong light irradiation | |||
| 3. Adjacent sensor mutual interference | 3. Keep distance ≥50mm between sensors | |||
| 4. Polvere & oil covered sensing window | 4. Clean lens with alcohol | |||
| Unstable output signal | 1. Severe power voltage fluctuation | 1. Add power filter or voltage stabilizer | 1H | Power filter, staffa di montaggio |
| 2. Uneven object surface | 2. Optimize sensing angle for stable reflection | |||
| 3. Sensor displacement caused by vibration | 3. Fasten mounting bracket | |||
| 4. Internal circuit failure | 4. Replace sensor | |||
| Indicator light off | 1. No power input | 1. Check power wiring | 0.5H | New sensor, power wire |
| 2. Reverse power polarity | 2. Correct positive and negative polarity | |||
| 3. Damaged built-in LED | 3. Replace sensor | |||
| 4. Internal circuit damage | 4. Replace sensor | |||
| Failed protection performance | 1. Damaged sealing ring of M12 connector | 1. Replace M12 sealing ring | 1H | M12 seal ring, sensor housing |
| 2. Physical damage on housing | 2. Replace sensor if housing broken | |||
| 3. Aging seal after long-term high-pressure washing | 3. Regular inspection and timely replacement |
Suggerimenti per la manutenzione: Check power supply first, then sensing distance and object condition; fasten connectors regularly, keep lens clean; replace sensor directly if frequent faults occur.
- Campi di applicazione & Industry Cases
6.1 Recommended Application Scenarios
Cibo & Bevanda: Product detection on packaging and filling lines, resistant to daily CIP/SIP high-pressure washing
Pharmaceutical Industry: Material inspection for pharmaceutical production equipment, meet GMP clean room standards
Packaging Industry: Presence detection of cartons and plastic packages, short body fits narrow installation space
Logistica & Magazzinaggio: Parcel detection on conveyor lines, excellent vibration resistance
Produzione automobilistica: Position detection for assembly parts, 1ms fast response suitable for high-speed production lines
Electronic Processing: Detection of PCB and electronic components, low power consumption for automatic equipment
6.2 Unrecommended Application Scenarios
Strong infrared radiation environment: Easy to cause false trigger under direct sunlight or infrared heating equipment
Heavy dust environment: Dust covers lens easily and affects detection accuracy (regular cleaning required)
Long-term underwater immersion: IP69K is only for high-pressure washing, not submersible use
Ultra-high temperature environment: Ambient temperature over 60℃ will damage internal components and shorten service life
Severe electromagnetic interference area: Shielding measures must be added to avoid unstable signals
6.3 Casi applicativi tipici
Caso 1: Cibo & Beverage Filling Production Line
Applicazione: PET bottle presence detection to ensure normal filling operation
Configurazione: 24 pcs S15-PA-5-C11-PK for whole line filling stations
Operation effect: Stable operation for 3 years with failure rate lower than 0.2%, adapt to daily 80℃ 100bar CIP flushing, 100% detection accuracy
Caso 2: Pharmaceutical Blister Packaging Line
Applicazione: Integrity inspection of pharmaceutical blister packs
Configurazione: Combined use of S15-PA-5-C11-PK diffuse sensor + S15-PA-3-C00-PK retro-reflective sensor
Operation effect: High precision to identify 0.1mm packaging defects, comply with GMP standards, support 24-hour continuous production
- Core Summary (Purchase & Maintenance Guide)
- Brand Confirmation: S15-PA-5-C11-PK is professional DATALOGIC photoelectric sensor, not PLC or power supply module
- Prestazioni principali: Diffuse type, 1m sensing range, Uscita PNP, M12 connection, IP69K high washing resistance
- Certificazione & Shipment: Complete CE/UL/CSA/RoHS certificates, no built-in batteries, fully compliant for global air freight
- Replacement Solution: Replace with S15-NA-5-C11-PK stainless steel version for longer service life in harsh sites
- Suggerimento di selezione: Confirm sensing distance and working environment; select stainless steel IP69K model preferentially for food industry
- Manutenzione giornaliera: Clean sensing lens 1~2 times per week, inspect connector sealing, avoid direct high-pressure water impact on sensor front face
