Hakko MONITOUCH V810iCN-080 HMI - Contattore,interruttore automatico,sensore,Codificatore,PLC,Convertitore

Wechat: +86-13184948252 Whatsapp: 0086-13811255435 E-mail: kent@bestcontactor.com

Di Contatto |

Hakko MONITOUCH V810iCN-080 HMI - Contattore,interruttore automatico,sensore,Codificatore,PLC,Convertitore

PLC/

Hakko MONITOUCH V810iCN-080 HMI

The V8 series HMI is discontinued. It is widely used on legacy equipment (per esempio., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) C: Standard VGA (640×480) economy version N: Analog resistive touch ...

  • Dettagli del prodotto

The V8 series HMI è interrotto. It is widely used on legacy equipment (per esempio., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

Definizione del codice modello

V810: V8 series, 10.4-inch model

io: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

C: Standard VGA (640×480) versione economica

N: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

Specifiche hardware principali

Display: 10.4″ Display LCD a colori TFT, 640×480 VGA, 65,536 colori

Touch type: Analog resistive touch

Retroilluminazione: GUIDATO, rated service life approx. 70,000 ore

Memoria: 4.5MB FROM for screen storage; 128KBSRAM (for recipes & alarm logs)

Protezione del pannello frontale: IP65 (with original waterproof gasket), rear side IP20

Dimensioni complessive: 303.8 × 231.0 × 69.0 mm

Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 tolleranza)

Rear Interface List

  1. LAN RJ45: 10/100Mbps Ethernet
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (CN1): RS232C / RS422/485
  4. USB-A (Ospite), USB-B (Programming slave port)
  5. CF card slot (legacy CF card, not SD card)
  6. 24VDC power terminal block

Nota: V810iCN does NOT support GU video/RGB optional modules

Software & Comunicazione

Software di programmazione: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: Connettiti a 8 PLCs of different brands simultaneously (Mitsubishi, Siemens, Omron, Delta, termoregolatori, inverter, ecc.)

Funzioni supportate: Alarms, trend graphs, gestione delle ricette, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & registri

Opzioni di sostituzione (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-pollice, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Important reminder: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

Difetti comuni & Suggerimenti per la manutenzione

Typical failures: Unresponsive touch, touch offset, schermo nero, backlight failure, communication loss, unreadable CF card

Pezzi di ricambio: Pannello a sfioramento, Retroilluminazione a LED, power board, Carta CF, backup battery for SRAM

Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / Fuji Elettrico) Elenco completo dei modelli

The entire V8 series is end-of-life (EOL).

Spiegazione del suffisso

io: Built-in LAN Ethernet port; no i = no Ethernet port

S: High-performance model, supports GU RGB video optional modules

T: Mid-range model

C: Standard economy model (V810iCN belongs to this branch)

M: Simplified model exclusive to V806

CH: 7.5-inch handheld type

X: 15-inch XGA high-end model

N: Analog resistive touch; D / 080: Alimentazione DC24V

5.7-pollice | V806 Series (320×240 QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (DC24V)

7.5-pollice | Handheld Model V808CH

V808CH / V808iCH

8.4-pollice | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (DC24V)

10.4-pollice | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (Versione economica; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (Di fascia media, supports GU optional units)

V810S / V810iS (Ad alte prestazioni, supports GU video/RGB modules)

Suffix variants: N (tocco resistivo), D/080 (DC24V), per esempio., V810iCN, V810iTN, V810iSN

12.1-pollice | V812 Series (800×600 SVGA)

V812S / V812iS (Ad alte prestazioni, supports GU video modules)

15-pollice | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; Ethernet + ingresso video)

Function Comparison Table

Model BranchBuilt-in LAN (io)GU Video Module SupportPosizionamento
V8xxC (V810iC/V808iC)Optional i❌Economia (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅Ad alte prestazioni
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

Software & Sostituzione

Software di programmazione: V-SFT5 / V-SFT6

Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-pollice, DC24V, Ethernet integrato, economy grade, no video expansion port, cutout size: 289.0 × 216.2 mm

  1. Original Brand Upgrade (Prima scelta: Project Migration, No Cutout Modification)

(1) Serie V10 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (La scelta migliore)

✅ Identical panel cutout; nessuna modifica del mobile richiesta. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) Serie V9 (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

Stesso schema & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-pollice, DC24V, Ethernet + RS485/232 ports

Weintek: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / Xinje: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

Svantaggio: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

Selection Comparison Table

Modello sostitutivoNo Cutout ModificationDirect Project MigrationVideo Module SupportStato della fornitura
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌Interrotto, only stock/used
V810iTN/080✅✅✅Interrotto, secondhand only
Domestic 10.4″ HMIAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. Protocolli di comunicazione (Mitsubishi MC, Siemens S7, Omron Hostlink, ecc.) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

Prec:

Prossimo:

Lascia una risposta

Lasciate un messaggio