Schneider Electric BMXCPS3500

(BMXCP53500 is an incorrect model number)

1. Model Code Breakdown

2. Panoramica del prodotto

The Schneider BMXCPS3500 is a high-power AC power supply module for the Modicon X80 platform, specifically designed for Modicon M340 and M580 Programmable Automation Controller (PAC) rack. It provides stable DC output to power the backplane, Moduli I/O, processore, and field sensors.

3. Specifiche tecniche principali

4. Ambiente operativo & Applicazioni
5. Sistemi di Automazione Industriale: PLC control systems in manufacturing, process industries, infrastrutture, ecc.
6. Harsh Industrial Environments: Resistant to wide temperature ranges, fluttuazioni di tensione, and electromagnetic interference.
7. Medium-to-Large PLC Systems: Supplies stable power for multi-module configurations, supporting expanded I/O and complex control tasks.
8. Global Deployment: Wide input voltage design compatible with power grid standards worldwide.
9. Replacement Models & Confronto di serie

Complete Model List of X80 Series Power Supply Modules

Sostituzione & Compatibility Information

Sostituzione diretta: BMXCPS3500 can replace legacy M340 series power supply modules.

Compatible Racks: BMXXBP0600, BMXXBP0800, BMXXBP1200, and other X80 series backplanes.

Incompatible: BMEXBP series backplanes (dedicated for EcoStruxure Control Expert platform).

6. Official Ordering Code & Documentazione

Official Ordering Code: BMXCPS3500 (standard version with no suffix)

Official Manual: Schneider Electric SQD-BMXCPS3500.PDF

Certificazioni: CE, RCM, Merchant Navy, CSA, EAC, UL; conforme alla norma EN 61131-2, IN 61000-6-4, ecc.

7. Engineering Implementation Recommendations
8. Note di installazione

Install the power supply module on the far left of the rack (recommended position).

Allow sufficient space for heat dissipation; avoid adjacent placement with high-power modules.

Use shielded cable for input power to reduce electromagnetic interference.

2. Wiring Standards

Correctly connect live (l), neutro (N), and protective earth (PE) fili.

Separate sensor power and I/O power terminals to avoid cross-connection.

High-current loads should be powered directly from external sources to reduce module load.

3. Linee guida per la selezione

Select the appropriate power supply based on total system power requirements, with 20–30% power margin.

Consider on-site power quality; install surge protectors and filters if necessary.

The Schneider BMXCPS3500 is a highly reliable, high-efficiency industrial power supply module that provides a complete power solution for the Modicon X80 platform. Its wide input voltage, multi-channel output, and comprehensive protection make it an ideal choice for medium-to-large PLC systems. If you need to verify BMXCP53500, please confirm the correct model number or contact Schneider Electric technical support for more information.

BMXCPS3500 is an isolated AC/DC switching power supply

that provides stable multi-channel 3.3V and 24V DC power for M340/M580 PLC racks. Its core operation consists of 5 stages:

1. Input Processing (AC → High-Voltage DC)

Input: 100–240V AC (50/60 Hz)

EMI filtering: suppresses grid surges and high-frequency interference

Rectifier bridge: converts AC to pulsating high-voltage DC (ca. 310A DC)

Capacitive filtering: smoothes into stable high-voltage DC

2. High-Frequency DC/DC Conversion (Core Stage)

PWM controller drives MOSFET high-frequency switching (tens of kHz)

High-frequency transformer:

Provides input-output electrical isolation (3000V e)

Converts high-voltage DC into multi-channel low-voltage high-frequency pulses

3. Output Rectification & Filtering

Secondary high-frequency pulses → Schottky diodes / synchronous rectification → DC

LC filtering: smoothes ripple to produce clean, stable voltage

4. Multi-Channel Regulated Output (Unique to BMXCPS3500)

3.3A DC / 4.5UN: powers CPU, backplane bus, and I/O logic

24A DC / 1.3UN: main power for rack I/O modules

24A DC / 0.9UN: dedicated sensor power (isolato, independent current limiting)

5. Closed-Loop Regulation + Protection Mechanism
6. Voltage Regulation

Output voltage sampled via voltage division → compared with internal reference

PWM duty cycle dynamically adjusted to maintain constant output voltage

2. Integrated Comprehensive Protection

Sovratensione / undervoltage protection (input and output)

Sovraccarico / protezione da cortocircuito (per-channel current limiting, hiccup recovery)

Overtemperature protection (power reduction or shutdown at excess temperature)

Internal fuse

3. Status & Alarm

Front-panel READY LED: ON in normal operation, flashing in fault condition

Passive alarm relay:

Normale: contacts closed

Power loss / colpa / overtemperature: contacts open (can connect to PLC or audible-visual alarm)

RESET button: manually restarts the rack and resets faults

6. Overall Operating Principle (Riepilogo)

Mains AC → Rectification & Filtering → High-Frequency Isolated Switching → Multi-Channel Rectification & Filtering → Closed-Loop Regulation → Distribution to CPU / I/O / Sensors via Backplane, with full protection and status monitoring.

7. Typical Application Sequence
8. Power-on → Input filtering and rectification
9. Control circuit startup → PWM begins operation
10. Outputs gradually establish → Regulation locks in
11. READY LED illuminates → Alarm relay energizes → CPU startup enabled
12. Fault (sovracorrente / overtemperature / power loss) → Outputs shut off immediately → Alarm relay de-energizes → Fault indication