Schneider RM17TA00 3-Phase Multifunction Supply Monitoring Relay

(Sequenza di fasi / Perdita di fase / 3-Phase Voltage Unbalance)

Serie: Zelio Control / Harmony RM17T Series, Montaggio su guida DIN 3-phase monitoring relay, commonly known as phase sequence protector.

✅ Monitoring Functions

Phase sequence detection (L1-L2-L3): Instant trip upon reverse phase sequence

Phase loss detection: Instant trip if any phase is lost (including phase loss with regenerated voltage from motors)

3-phase voltage asymmetry (sbilanciare): Adjustable threshold from 5% A 15% of Un, with time-delayed tripping

Logic rule: Inversione di fase / phase loss → instantaneous trip; voltage unbalance → delayed trip.

📌 Key Electrical Specifications

Monitoring voltage range: AC 208～480V (operating limit: 183～528V AC)

Frequenza: 50/60 Hz (±10%)

Output contact: 1 C/O (SPDT), 5UN / 250VCA

Time delay adjustment: 0.1~10s (only for unbalance faults)

Reset delay: ca. 1.5S

Consumo energetico: ≤22VA @ 400V 50Hz

Montaggio: DIN 35mm rail; width 17.5mm (1 larghezza del modulo)

Indicazione: Status LED; sealed transparent cover prevents accidental parameter changes

🧮 RM17T Series Selection Comparison (Chiave per la selezione del modello)

RM17TT00: Sequenza di fasi + perdita di fase (NO unbalance monitoring)

RM17TA00 (Current Model): Sequenza di fasi + perdita di fase + 3-phase voltage asymmetry

RM17TU00: Sequenza di fasi + perdita di fase + sottotensione

RM17TE00: Sequenza di fasi + perdita di fase + asymmetry + sovratensione + sottotensione (full-function model)

🛠️ Scenari applicativi tipici

Ascensori, hoisting & attrezzature di trasporto, compressori d'aria, pompe dell'acqua, unità di refrigerazione, macchine per l'imballaggio; prevents motor reverse rotation, burnout from phase loss, and overheating caused by three-phase unbalance.

🔌 Wiring Guidelines

1. Connect L1/L2/L3 directly to the monitored three-phase supply (autoalimentato, no separate auxiliary supply required).
2. Terminali 15/16/18 form one changeover contact: 15-16 = normally closed; 15-18 = normally open.
3. Panel setting: First select rated voltage (208/220/380/400/415/480V), then set unbalance threshold and fault delay time.
4. Fault recovery: Automatic reset once power returns to normal; no manual reset button.

⚠️ Risoluzione dei problemi

Relay does not energize after power-up: Check phase sequence, perdita di fase, and voltage range dip switch setting.

Frequent tripping during normal operation: Increase unbalance percentage threshold, extend time delay, and investigate single-phase load current imbalance.

No LED illumination: Three-phase input voltage exceeds the 183~528V operating range.

📎 Replacement Options

Direct upgraded replacement within the same product line: RM22TA33 (RM22 series, same functions with 2 C/O contacts).

Alternative domestiche: Cinto / Delixi three-phase phase-sequence & unbalance monitoring relays.

1. Full Model List of RM17T Series

(3-phase supply monitoring relays, 17.5mm single-module width, Montaggio su guida DIN)

1) Modello base: RM17TG (Only phase sequence + perdita di fase; no unbalance / undervoltage monitoring)

RM17TG00: 1 C/O changeover contact, 208～480V AC

RM17TG20: 2 C/O dual changeover contacts, 208～440V AC

2) Multifunction Models (RM17TT / DI FRONTE / TU / IL, 208～480V AC, 1 C/O contact uniformly)

Abbreviation explanation:

TU = T + Sottotensione

TE = T + Everything (funzioni complete)

III. Common Specifications for the Whole Series (All Models Identical)

Intervallo di tensione: AC 208～480V (operating limit 183～528V)

Valutazione dei contatti: 5UN / 250VCA; RM17TG00/TT/TA/TU/TE = 1 C/O; only RM17TG20 = 2 C/O

Larghezza: 17.5mm (1P module)

Modalità di ripristino: Automatic reset after fault clears; no manual reset button

1. Upgraded Replacement Models (RM22 Series with Extra Contacts)

RM17TA00 → RM22TA33 (2 C/O contacts)

RM17TU00 → RM22TU23

RM17TE00 → RM22TE33

RM17TA00 Overall Dimensions (L × A × P)

17.5 mm× 90 mm× 72 mm

Larghezza: 17.5 mm (1-pole module, same width as 1P MCB)

Altezza: 90 mm

Profondità (from DIN rail front face): 72 mm

Montaggio: DIN35 standard rail

Peso netto: ca. 0.13 kg

✅ All models in RM17T series (RM17TT00 / RM17TU00 / RM17TE00 / RM17TG00) share identical dimensions.

Core Positioning of RM17TA00

It provides phase sequence + perdita di fase + three-phase voltage unbalance protection, mainly for three-phase asynchronous motors. It prevents reverse rotation, motor burnout from phase loss, and overheating caused by long-term voltage imbalance. Autoalimentato, compact 1-module DIN rail design, ideal for compact control cabinets and retrofitting projects where no PLC signal collection is needed.

1. Industria & Equipment Applications
2. Sollevamento & Trasmettere (Applicazione primaria)

Gru a ponte, montacarichi elettrici, trasportatori a nastro, impilatori, ascensori; prevents motor reverse rotation after phase reconnection and overheating damage to gearboxes and motors due to long-term unbalance.

2. Ascensori & Lifting Platforms

Freight elevators, simple lifting platforms, parking lift power circuits; wrong phase sequence causes reverse car movement; voltage unbalance leads to excessive temperature rise of traction motors.

3. Pompe dell'acqua & Pumping Stations

Pompe centrifughe ad alta potenza, submersible sewage pumps, pre-power monitoring before variable-frequency drives; unbalance is frequently caused by mixed single-phase loads in water supply, sewage treatment and chiller pump systems.

4. Compressori d'aria & HVAC Refrigeration Units

Compressori d'aria a vite, refrigeratori d'acqua, air-source heat pumps, compressori frigoriferi; compressors are highly sensitive to three-phase unbalance, which easily burns out motor windings.

5. Confezione, Tessile & Automazione della lavorazione del legno

Packaging lines, macchine tessili, estrusori, injection molding auxiliary equipment; frequent power maintenance and phase swapping require phase sequence verification before power-on.

6. Fan Loads

Ventilatori di scarico, induced draft fans, ventilatori di asciugatura; large inertia fans produce regenerated voltage after phase loss; this model supports phase loss detection under regenerated voltage conditions.

7. Control Panels & Corrispondenza dell'attrezzatura OEM

380V three-phase control cabinets, non-standard automation OEM factory-fitted protection; old equipment retrofits, hard-contact interlock without adding PLC analog modules.

1. Selection Boundary: Adatto / Scenari non adatti

✅ Consigliato:

Three-phase motor loads with risks of voltage asymmetry overheating (core advantage over RM17TT00)

Supply voltage AC 208~480V, 50/60Hz

Spazio nell'armadio limitato, soltanto 1 module width available

Hard-contact interlock directly wired into main contactor coil circuit

❌ Non consigliato:

Sovratensione + undervoltage monitoring required → choose RM17TE00

Only undervoltage protection without unbalance → choose RM17TU00

Dual independent alarm contacts required → upgrade to RM22TA33 (2C/O)

Motors behind variable-frequency drives: VFDs already have built-in phase loss & protezione dagli squilibri; extra relay is generally unnecessary.

III. Typical Control Logic

Contact wired in series with the main contactor coil circuit:

Normal power supply → relay energizes and closes, contactor power permitted;

Inversione di fase / perdita di fase / voltage unbalance detected → relay de-energizes and opens, cutting off main power, with dry contacts available for PLC or audible-visual alarm signals.