中間リレーとコンタクタの違い - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

微信: +86-13184948252 ワッツアップ: 0086-13811255435 電子メール: kent@bestcontactor.com

について 接触 |

中間リレーとコンタクタの違い - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

ニューストレードニュース

中間リレーとコンタクタの違い

 中間リレーとコンタクタの違い

  1. Core Distinction in One Sentence

中間リレー: Transmit signals, carry low current, serve as signal transfer station

コンタクタ: Drive loads, carry high current, control motors

  1. Intuitive Comparison
  2. 電流容量

中間リレー: Max 6~10A, only for low current circuits

コンタクタ: 10A up to thousands of amperes, applicable to high-power equipment

  1. 主な用途

中間リレー: PLC signal conversion, multi-circuit wiring, circuit interlocking, 接点拡張

コンタクタ: Directly control high-power loads such as motors, ウォーターポンプ, fans and heating tubes

  1. Contact Difference

中間リレー: Equipped with only small contacts without main/auxiliary distinction, large quantity of contacts

コンタクタ: Composed of high-current main contacts and low-current auxiliary contacts; main contacts are specially designed for load current transmission

  1. Arc Extinguishing Performance

中間リレー: Without arc shield, incapable of breaking strong electric arc

コンタクタ: Built-in arc shield to extinguish electric arc during power-off and prevent contact burnout

  1. サイズ & 価格

中間リレー: コンパクトかつ低コスト, 制御盤内に密に設置

コンタクタ: サイズが大きくなり、価格も高くなります

  1. コイルの動作原理

同じ動作原理を共有しています: 低電流コイルを引き込んで接点のオンオフを制御します.

唯一の違いは接点の最大電流支持容量です。.

  1. 実践的な選択ルール

微弱電流信号変換には中間リレーを使用

高出力モーターの始動/停止制御にコンタクターを使用する

コンタクタの補助接点が不足した場合に中間リレーを追加して接点を増設

  1. 典型的なアプリケーションシナリオ

制御盤内の低信号スイッチング: RXMシリーズ 中間リレー

380Vモーターのスタートストップ制御: ACコンタクタは必須です

前へ:

次:

返信を残す

伝言を残す