Advantech ADAM-5018 Analog Input Module - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

The ADAM-5018 is a 7-channel differential thermocouple analog input module for the ADAM-5000 rack system. It adopts RS485 Modbus RTU and is designed for temperature data acquisition, supporting multiple thermocouple types, mV voltage and current signals.

モデルコードの定義

ADAM: シリーズコードの Advantech remote I/O modules

50: ADAM-5000 rack backplane series (plug-in design; must be installed on ADAM-5000 series chassis, different from standalone ADAM-4018)

18: 7-channel thermocouple & multi-function analog input

Suffix A2E/AE: Standard industrial version; ADAM-5018P = enhanced version with independent range per channel

注記: Standard ADAM-5018 shares one range across all channels; the 5018P allows separate configuration for each channel.

主要な技術仕様
チャンネル: 7 differential input channels
解決: 16-少し
Total Sampling Rate: 10 S/s (all channels combined, low-speed temperature measurement)
正確さ: ±0.1%FS for voltage/thermocouple mode; ±0.2%FS for current mode
分離: 3000 VDC optocoupler isolation to protect host and field circuits
CMRR: ≥92 dB @ 50/60 Hz, strong anti-interference against power frequency noise
Thermocouple Types: J, K, T, E, R, S, B

J: 0~760°C

K: 0~1370°C

T: -100~400°C

E: 0~1000°C

R/S: 500~1750°C

B: 500~1800°C

Universal Analog Signals: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V; ±20 mA, 4～20mA (内蔵 120 Ω sampling resistor, no external resistor required)
保護: TVS/ESD, withstand ±35 V overvoltage, 逆極性保護
動作環境: -10 ~ +70°C, 5~95% RH、結露なし
コミュニケーション: Backplane RS485, Modbus RTU protocol
電源: 10~30 VDC from rack, 典型的な 24 VDC
ハードウェア & 配線ガイドライン

ターミナル: 16-pin pluggable screw terminal; differential wiring: thermocouple positive → CHx+, negative → CHx-

CJC Cold Junction Compensation: On-board cold-junction temperature sensor, automatic compensation, no external compensation required

Wiring Recommendation: Use matched thermocouple extension cables; route cables away from power cables to reduce EMI

取り付け: DINレール取付, plug directly into the ADAM-5000 rack slot.

代表的な用途

Heat treatment furnaces, オーブン, 窯, food sterilization, 化学反応器, multi-point temperature monitoring for HVAC, furnace group temperature collection; paired with PAC/PLC/SCADA host systems for temperature data logging.

ADAM-5018 vs ADAM-5018P

モデル	Range Configuration
ADAM-5018	Single unified range for all channels
ADAM-5018P	Independent signal type & range per channel; mixed K/J thermocouples and 4-20mA signals on one module, higher project flexibilityAdvantech

代替オプション & セレクションガイド
In-series Upgrade: ADAM-5018P (preferred for mixed sensor types)
Standalone Module (No Rack Required): ADAM-4018+ / ADAM-4019+
Next-Generation Bus I/O: AMAX-5018 (EtherCAT, 6-channel thermocouple, high-speed acquisition)

警告: AMAX-5018 belongs to EtherCAT slice I/O, not compatible with ADAM-5000 RS485 racks.

ADAM-5000 Series Full Model List

Rack Backplanes (Mandatory Base Unit)

RS485 (Modbus RTU)

ADAM-5000/485: 4-slot rack
ADAM-5000E: 8-slot rack

イーサネット (Modbus TCP)

ADAM-5000L/TCP: 4-slot Ethernet rack
ADAM-5000/TCP: 8-slot Ethernet rack
ADAM-5000/TCP-CE: 8-slot PAC rack with CE embedded system
アナログ入力モジュール (AI)
ADAM-5013: 3-channel RTD (PT100/Ni100), 16-少し, 3000 VDC isolation
ADAM-5017: 8-channel universal AI (mV/V/4~20mA), single shared range; total sampling rate 10 S/s
ADAM-5017P: 8-channel AI with independent range per channel (upgraded model)
ADAM-5017H: 8-channel high-speed AI, max total sampling rate 8 kHz
ADAM-5017UH: 8-channel ultra-high-speed AI, max total sampling rate 200 kHz
ADAM-5018: 7-channel thermocouple input (J/K/T/E/R/S/B), unified range across all channels, built-in CJC cold junction compensation
ADAM-5018P: 7-channel thermocouple input with independent channel configuration; mixed TC/mA signals supported (preferred enhanced model)
アナログ出力モジュール (へ)
ADAM-5024: 4-channel isolated analog output; signal types: 0～10V, 0～20mA, 4～20mA; 12-少し, 3000 VDC isolation
デジタル入力モジュール (から)
ADAM-5051: 16-channel non-isolated digital input

ADAM-5051S: Sink type

ADAM-5051D: Source type

ADAM-5052: 8-channel isolated DI (3000 VDC isolation)
ADAM-5053S: 32-channel high-density isolated DI
デジタル出力モジュール (する)
ADAM-5050: 16-channel universal DIO, jumper-selectable DI/DO mode
ADAM-5055S: 8DI+8DO mixed isolated module with LED indicators
ADAM-5056: 16-channel digital output

ADAM-5056D: With LED status display

ADAM-5056S: Sink-type isolated output

ADAM-5056SO: Source-type isolated output

ADAM-5057S: 32-channel high-density isolated DO
Relay Output Modules (Contact Output)
ADAM-5060: 6-チャンネルリレー出力 (2 Form A + 4 フォームCの連絡先)
ADAM-5068: 8-チャンネルリレー出力
ADAM-5069: 8-channel high-power relay output with LED indicators
高速カウンター / Frequency Modules
ADAM-5080: 4-channel bidirectional up/down counter, 孤立した, low-speed pulse input
ADAM-5081: 4-channel high-speed counter & frequency measurement for high-frequency pulse acquisition
Suffix Ordering Codes