CHNT CJX2-4011 AC コンタクタ

CJX2-4011 is a 3-pole AC contactor from CHNT’s classic CJX2 series, with a 40A rated current and equipped with 1 いいえ + 1 NC補助接点.

It is suitable for AC-3 duty (例えば, three-phase motors) and widely used in industrial motor control, power distribution switching, および自動化システム. It is a cost-effective choice from a leading domestic brand.

1. モデル & Part Number Explanation

2. 主要な技術仕様

3. 特徴 & 利点
4. High-reliability contact system

Silver alloy contacts offer good conductivity, anti-welding, and arc resistance

32-sheet silicon steel core for stable, low-noise operation (≤55dB)

Red copper coil + flame-retardant housing for high temperature resistance

2. Dual mounting flexibility

Standard 35mm DIN rail for quick installation

Also supports screw mounting for panel installation

3. Energy saving

Low power consumption for long-term operation

Stable coil pull-in, reduced control circuit energy use

4. Strong compatibility

Directly matches CHNT NR2 series thermal overload relays

Dimensions compatible with Schneider LC1-D40 series for direct replacement

4. インストール & 配線ガイド

4.1 インストール要件

DINレール: Clip onto 35mm standard rail and ensure full locking

ネジ取付: Use M4 screws on a flat surface with ≥10mm clearance for heat dissipation

Prefer vertical installation; avoid horizontal mounting

4.2 配線仕様

4.3 Key Wiring Notes

Do NOT mix main pole and coil terminals

Securely crimp wires to avoid overheating

When used with a thermal relay, connect it after T1/T2/T3

5. 代表的な用途

Three-phase motor control: 7.5kW~18.5kW pumps, ファン, コンベア

産業用配電: cabinet switching, capacitor bank control

自動化された生産ライン: PLC-controlled start/stop and interlock

Building systems: 空調設備, エレベーター, 消防ポンプ

工作機械: lathes, フライス盤, drilling machines

6. 代替モデル & 互換性

6.1 CHNT Upgraded Replacements

6.2 ブランド間の同等品

7. 購入 & 使用上のヒント
8. Authenticity

Buy via official channels to avoid counterfeits

Verify model, コイル電圧, and poles

2. 付属品

Must use with NR2 thermal relay for motor overload protection

Surge suppressor (SR2 series) recommended for frequent switching

3. Selection Rules

AC-3 for motors; AC-1 for resistive loads

Coil voltage must match control power

Higher protection grade for dusty/humid environments

4. メンテナンス

Check terminal tightness every 6–12 months

Clean contacts and replace if worn

Energize briefly before long-term storage

> 注記: CJX2-4011 is a general-purpose contactor with high cost-performance, stable supply, and easy replacement. Widely used in machinery, 化学薬品, building materials, light industry.

Complete CHNT AC Contactor Series-Models & 注文コード

Core Overview

CHNT AC contactors cover 5 main series:

CJX2 (classic), NXC (Kunlun upgrade), NC1 (industrial IEC), NC2 (high current), NC8 (high voltage heavy duty).

Models are coded by current + 補助接点 + コイル電圧.

Order codes start with 710010xxxx and cover 6A ~ 1250A.

1. CJX2 Series (Classic, 段階的に廃止される)

応用: Small-medium motors, 35mm DINレール, compatible with Schneider LC1-D.

> 注記: 01= 1NC, 10=1いいえ, 11=1NO+1NC. コイル電圧: AC24/36/110/220/380V. Last 3 digits = voltage code.

2. NXC Series (Kunlun Upgrade, 主流)

応用: CJX2 replacement, smaller, lower power, 長寿命.

> 注記: Z = DC coil (例えば, NXC-12Z DC24V); M = mechanical latching.

3. NC1 Series (Industrial IEC Standard)

応用: International standard, 高い信頼性, frequent operation.

> 注記: NC1-N = reversing contactor. Z = DC coil.

4. NC2 Series (High Current Industrial)

応用: Heavy motors & main circuits up to 800A.

> 注記: 3P/4P available. シャントトリップ, undervoltage release optional.

5. NC8 Series (High Voltage Heavy Duty)

応用: Up to 1140V, 2650A for metallurgy, 採掘, 海洋.

> 注記: M = mechanical latching. 4P for 3P+N systems. DC coil available.

6. General Selection & Order Code Rules

6.1 Model Coding

6.2 Order Code Format

標準: 710010xxxxxxx

例:

CJX2-4011 AC220V → 710010200403220

NXC-12 DC24V → 710010100000500Z

6.3 選定のポイント

1. Load: AC-3 for motors; AC-1 for resistive loads
2. Coil voltage must match control power
3. 補助接点: 10, 01, 11, 22
4. 極: 3三相の場合はP; 4P for 3P+N
5. シリーズ比較 & おすすめ