Schneider XBTGT7340 Color Touchscreen

状態: 製造中止 (End of production: 31 12月 2015; End of official service: 31 12月 2025). No new original units available; only used/refurbished units on the market.

製品のポジショニング: 15-inch advanced color touchscreen with video input, CF card slot and expansion bus card slot

主な仕様

画面: 15″ TFTカラー液晶, 1024×768XGA, 65536 色, analog resistive touch

電源: 24 ワシントンDCで

CPU: RISC 266 MHz

メモリ: 32 MBフラッシュ (application program); 512 KB SRAM (data retention with lithium battery backup); supports CF card (最大. 1 GB)

プログラミングソフトウェア: Vijeo Designer (use VJD6.2 SP5 or higher for project migration to replacement models)

オペレーティング·システム: Harmony

Front panel protection: IP65 (panel mount installation)

📶 Interface List

1. COM1: RS232 / RS422 / RS485
2. COM2: RS485 (with terminal resistor DIP switch)
3. RJ45 Ethernet (10/100 Mbps, Modbus TCP)
4. 2 × USB host ports
5. CF card slot
6. Video input (NTSC/PAL, for camera connection — core feature of this model)
7. Expansion slot: supports Profibus DP / DeviceNet バスカード
8. RTCリアルタイムクロック

📐 Panel Cutout Dimensions

Cutout size: 383.5 × 282.5 mm (許容範囲 +1/-0 mm)

Suitable panel thickness: 1.6~10 mm; maximum corner radius R3 mm

🔁 Official Replacement Options (2 choices)

1. No video capture required: HMIG3U + HMIDT732 (15-inch modular HMI set)
2. Video input must be retained: HMIG5U22 + HMIDT732

Project migration: Open the original XBTGT7340 project in Vijeo Designer, simply change the target model, fine-tune a small number of communication drivers; no need to redesign screens.

📌 Supported Communication Protocols

Modbus RTU/TCP, Uni-TE, Mitsubishi MC, Omron Host Link/FINS, Allen-Bradley DF1, Siemens S7 protocols, plus mainstream PLC drivers for GE, 富士山, デルタ, 新ジェ, LS, Inovance etc.

⚠️ Common Faults for Used / Repaired Units

Aging internal lithium battery → lost clock & SRAM data

Touch panel aging & drift

CCFL backlight tube failure (not LED backlight)

Poor contact or damage of CF card

Malfunction of the video input circuit

Communication Protocols of XBTGT7340 (Vijeo Designer Drivers)

Divided into on-board native protocols + additional fieldbus via optional expansion cards. Drivers are selected and loaded inside Vijeo Designer projects.

Native シュナイダーエレクトリック プロトコル

1. Modbus RTU (COM1/COM2 serial ports, RS232/422/485)
2. Modbus TCP (RJ45 Ethernet port)
3. Uni-TE (for legacy Schneider Premium / マイクロ / Nano PLCs)
4. Modbus Plus (requires external gateway XBTZGUMP; no onboard hardware)
5. FIPWAY / FIPIO (FIP fieldbus; requires external gateway)

Native Third-Party PLC Serial & Ethernet Drivers

Siemens SIMATIC: S7-200 PPI, S7-300/400 MPI, S7 TCP (S7 protocol)

Mitsubishi Melsec: FX serial, Q-series serial/Ethernet (MC protocol)

Omron Sysmac: Host Link, FINS (シリアル / イーサネット)

AllenBradley: DF1, DH485, イーサネット/IP

Additional drivers available for GE, 富士山, デルタ, Yonghong, LS, Inovance and other mainstream PLCs in the Vijeo Designer driver library.

Optional Expansion Slot (Fieldbus Cards, extra hardware required)

Profibus DP slave card XBTZGPDP → Profibus DP

DeviceNet card XBTZGDVN → DeviceNet

Only one card can be fitted at a time: Profibus DP or DeviceNet, not both simultaneously.

📌 Port Assignment

COM1: RS232 / RS422 / RS485 (Modbus RTUをサポート, PPI, MPI, Host Link etc.)

COM2: Fixed RS485 (preferred for Modbus RTU communication)

RJ45: 10/100 Mbps Ethernet (Modbus TCP, S7 TCP, FINS, イーサネット/IP)

USB ports: Only for program download & データロギング; no PLC communication drivers supported

⚠️ Important Limitations

1. Old firmware + early VJD versions have poor compatibility with newer PLCs (S7-1200/1500 native S7 protocol); use Modbus TCP as fallback.
2. Modbus Plus and FIPWAY need external gateways; the HMI has no built-in hardware for these buses.
3. Only one expansion bus card can be installed (Profibus DP or DeviceNet).

Full Model List of Schneider Magelis / Harmony HMIs

Two main product lines: Legacy XBT series (製造中止, including XBTGT7340) and Current Harmony series (active sales).

Software abbreviations: VJD = Vijeo Designer; EOTE = EcoStruxure Operator Terminal Expert

1. Discontinued Legacy XBT Series (Magelis, Vijeo Designer)

XBTGT (Classic Advanced HMI — same family as XBTGT7340)

XBTGT1105 / XBTGT1135 / XBTGT1335 | 3.8″

XBTGT2110 / XBTGT2120 / XBTGT2130 / XBTGT2220 / XBTGT2330 / XBTGT2430 | 5.7″

XBTGT4230 / XBTGT4330 / XBTGT4340 | 7.5″

XBTGT5230 / XBTGT5330 / XBTGT5340 / XBTGT5430 | 10.4″

XBTGT6330 / XBTGT6340 | 12.1″

XBTGT7340 | 15″ (with video input)

特徴: Dual serial ports, イーサネット, CF card slot, optional Profibus/DeviceNet expansion cards; production ended 2015, service ended 31 12月 2025.

XBTGK (触る + Keypad Combined Terminals)

XBTGK2120, XBTGK2330, XBTGK5330, XBTGK5340

XBTGH (Handheld Teach Pendant with Emergency Stop)

XBTGH2900, XBTGH5900

XBTGTW (Windows XPe Open HMI)

XBTGTW5340, XBTGTW6340, XBTGTW7340

XBTGC (HMI Controller with Built-in I/O)

XBTGC2120, XBTGC2220, XBTGC2330

XBTN / XBTR / XBTRT (Text Panels, Monochrome Small HMIs)

XBTN400, XBTN401, XBTN410, XBTRT500, XBTR410, XBTR510

ソフトウェア: Vijeo Designer Lite; serial only, no Ethernet port.

1. Current Harmony Series (Active Sales)
2. Harmony STO / STU (Compact Economy HMI, 3.5~5.7″)

STO: HMISTO705, HMISTO715, HMISTO725 (EOTE)

STU: HMISTU655, HMISTU855 (VJD, compatible with legacy projects)

2. Harmony GTO (Standard Advanced HMI, Vijeo Designer — direct XBTGT replacement)

HMIGTO2310 (5.7″)

HMIGTO4310 (7.5″)

HMIGTO5310 (10.4″)

HMIGTO6310 (12.1″)

Stainless steel hygienic version: HMIGTOxx10S (食べ物 & pharmaceutical applications)

3. Harmony GTU (Modular Split HMI: BOX Controller + Display Panel, VJD — Top choice for XBTGT7340 replacement)

Controller BOX:

HMIG3U (スタンダードモデル)

HMIG5U22 (Open model with video input support, matching XBTGT7340 camera function)

Display Panels HMIDT:

HMIDT351 / HMIDT542 / HMIDT642 / HMIDT732 (15-インチ, matching XBTGT7340 cutout)

4. Harmony ST6 (New Basic HMI, EcoStruxure Operator Terminal Expert)

HMIST6200 (4.3″)

HMIST6400 (7″)

HMIST6500 (10″)

HMIST6600 (12″)

HMIST6700 (15″)

Wide screen, デュアルイーサネット + dual serial ports; cannot run old Vijeo Designer projects directly.

5. Harmony ET6 (Entry-level Economy HMI, EOTE)

HMIET6200, HMIET6400, HMIET6500, HMIET6700

6. Harmony FT6 (Stainless Steel Hygienic HMI, FDA-compliant for clean rooms)

HMIFT6400, HMIFT6500, HMIFT6700

7. Harmony GK (キーパッド + Touch Terminals, VJD)

HMIGK5310

8. GTUX (Explosion-proof Outdoor HMI)

HMIGTUX652

9. Industrial Panel PC (All-in-one Industrial Touch Computer)

HMIPSA6, HMIPCC series, iPC BOX (HMIBSC…)

📌 Quick Selection Guide (for XBTGT7340 Upgrade)

Legacy VJD project + video input required: HMIG5U22 + HMIDT732

Legacy VJD project + no video required: HMIG3U + HMIDT732

新しいプロジェクト (no old program): HMIST6700 (15-inch ST6)

📌 Software Compatibility Rule

Vijeo Designer (VJD): XBTGT / XBTGK / GTO / STU / GTU / GK

EcoStruxure Operator Terminal Expert (EOTE): ST6 / ET6 / STO / FT6