Siemens 6SL3210-1PB13-8AL0 は電源モジュールです

The Siemens 6SL3210-1PB13-8AL0 is a パワーモジュール of the SINAMICS G120 series, specially designed for industrial drive systems. It is suitable for 200-240V single-phase/three-phase AC input (voltage fluctuation ±10%) and supports scenarios with 0.55kW heavy overload (200% load for 3 秒) and 0.75kW light overload (150% load for 3 秒). The following is a detailed collation of parameters:

1. コアの電気パラメータ
2. Input Specificationsシーメンス型番 6SL3210-1KE23-2UF1

電圧範囲: 200-240Vと (1-phase/3-phase), 47-63Hz. Equipped with a Class A filter and braking chopper, it can be directly connected to a TN power supply system to reduce electromagnetic interference.

入力電流: Maximum 3.2A in heavy overload (HO) mode and 4.1A in light overload (LO) mode, suitable for mainstream small and medium-power motors.

2. Output CapabilitySiemens S7-1200 series PLC

定格電力シーメンス 6ES7253-1AA22-0XA0 (EM253):

– Heavy Overload (HO): 0.55kW (200% load for 3 秒, 150% load for 57 seconds within a 300-second cycle).

– Light Overload (LO): 0.75kW (150% load for 3 秒, 110% load for 57 seconds within a 300-second cycle).

出力周波数: 0-650Hz, supporting multiple control modes such as V/f control and vector control.

3. Interrupting Capacityシーメンス 6ES7235-0KD22-0XA0

– Built-in short-circuit protection safely cuts off fault currents, IECに準拠 61800-5-1 標準. Although the specific breaking current value is not explicitly stated in public information, the module is designed to support highly reliable short-circuit protection.

1. Physical and Environmental Parameters
2. 機械的特性シーメンス 6ES7231-5QA30-0XB0 モジュール

寸法: 196mm (身長) × 73mm (幅) × 165mm (深さ), IP20保護等級付き, requiring installation in a control cabinet.

重さ: Approximately 1.5-1.72kg (slightly varying with configurations).

設置方法: Only vertical installation is supported, with the integrated operation panel facing upward to ensure heat dissipation efficiency.

2. 環境適応力6ES7142-5AF00-0BA0 Siemens

動作温度Siemens 1FL6034-2AF21-1LH1 Servo Motor:

– Heavy Overload (HO): -10°C ～ +50°C (ディレーティングなし), derating required above 50°C.

– Light Overload (LO): -10°C ～ +40°C (ディレーティングなし), derating required above 40°C.

保管温度: -40°C ～ +70°C, 相対湿度 <95% (結露しないこと).

高度: まで 1000 メートル (ディレーティングなし), requiring output power adjustment based on altitude beyond this.

3. 冷却方法シーメンスコンバータ 6SE6440-2UD42-0GA1

– Adopts forced air cooling design, improving heat dissipation efficiency through a built-in fan, 制御盤への設置に適しています.

Ⅲ. インターフェースと通信

1. Control Interfacesシーメンス V20 インバーター 15KW モデル 6SL3210-5BE31-5UV0

Digital Inputs/Outputs: 6 デジタル入力 (から), 2 デジタル出力 (する), supporting PNP/NPN signals.

Analog Inputs/Outputs: 1 アナログ入力 (AI, 0-10V or ±10V), 1 アナログ出力 (へ, 0-20mAまたは0-10V).

通信プロトコル: Requires pairing with SINAMICS control units (例えば, CU240E-2) and supports communication protocols such as PROFINET, Modbus RTU, and USS.

2. 拡張機能チントコンバーター (NVF2G-18.5/TS4 または NVF2G-18.5/PS4

– Safety function modules (例えば, STO) can be added via modular design to meet industrial safety standards (IEC 61508/SIL2).

– Supports external braking resistors (optional based on application scenarios) for fast braking and energy feedback.

1. 認証とコンプライアンス
2. 国際認証

– Complies with CE certification and RoHS directives. Some channels mark it as “UL Open Typ” (not fully UL-certified, requiring users to assess North American compliance independently).

– Meets electromagnetic compatibility standards such as IEC 61800-5-1 とEN 61000-6-2/6-4.

2. 国内認証

– No explicit mention of 3C certification, but complies with relevant Chinese low-voltage electrical standards.

1. Typical Applications and Functions
2. アプリケーションシナリオ

ファン/ポンプ: Achieves energy savings by dynamically adjusting motor speed, reducing energy consumption by over 30%.

Conveyor Belts and Lifting Equipment: Supports soft starting and precise speed control to reduce mechanical impact.

Household and Small Industrial Equipment: Compatible with 220V single-phase power supply, suitable for home debugging or small production lines.

2. コア機能

Energy Feedback: Feeds regenerative energy back to the grid through the braking chopper to improve system efficiency.

予防保守: Built-in diagnostic functions monitor module temperature, 現在, and other parameters to provide early warnings of potential faults.

Intelligent Protection: Integrates overvoltage, 不足電圧, および過熱保護, supporting remote monitoring and fault reset.

1. Procurement and Selection Recommendations
2. 参考価格

北米市場: Contact WhatsApp 86-13811255435 for inquiries, with additional shipping fees and tariffs applicable.

2. 選択に関する考慮事項

電圧マッチング: Ensure the input voltage matches the system design (200-240V) to avoid module damage due to voltage incompatibility.

電力要件: Select heavy or light overload modes based on the motor’s actual load to avoid long-term overload operation.

Control Unit Compatibility: Requires pairing with Siemens control units such as CU240E-2. It is recommended to use official tools (例えば, SINAMICS Startdrive) for parameter configuration.

Ⅶ. Technical Support and Documentation

1. 公式リソース

ユーザーマニュアル: Download the SINAMICS G120 PM240-2 Power Module Operation Guide from the Siemens official website, covering installation, パラメータ設定, and fault handling.

Online Tools: Use SINAMICS Startdrive software for quick commissioning, supporting automatic motor parameter identification and optimization.

まとめ

The Siemens 6SL3210-1PB13-8AL0 is a cost-effective small and medium-power frequency converter module suitable for energy-saving control in 200-240V systems. モジュラー設計, wide temperature operating range, and rich interface functions make it widely applicable in industrial and civil scenarios. Domestic users can purchase conveniently through e-commerce platforms, while North American users need to focus on confirming certifications and supply channels. For higher power or North American-compliant products, consider the HV series or consult the manufacturer’s technical support.